Larry! I gotta say, I absolutely love how you keep innovation going with your products! I bought the first regimen kit in may 2013!! Coming up on 10 years now of being a Ammo NYC product supporter I just want to say thanks sooo much for the commitment you have for your products! I can't even begin to imagine the effort it takes with developing and testing products before they get released to the public. Your passion defiantly shines through in each one! I can't wait to try the Pro II soon! If you ever need someone to test products before release or want product suggestions I would be glad to help! Thanks so much again for the years of knowledge and amazing products!! Hope to meet you someday and give my thanks in person - Paul Had to add a edit in this. The 964 looks sooooo goood still!!

@AMMONYCSTUDIO

Жыл бұрын

Thanks so much for the support over the years! Means the world!

I just put Avery Dennison Satin Roaring Thunder on my Mustang and I will be ordering this to go over it! Thanks as always Larry!

@AMMONYCSTUDIO

Жыл бұрын

Thanks Jared!!!

Love AMMO Products. Can’t wait to put this on my car after a polish. Thanks for the in-depth walkthrough Larry!

Vids have grown from very good to great, info is stellar. Two days ago I used my 3 plus year old but unopened AMMO ceramic, on a decently prepped car that has 25K miles. At 8K miles there was spray on Mothers ceramic. Back then used random orbital, the right light medium pad, light cutting compound, Sonax, washed buffed off residue, finished with two spray on coats of Mothers ceramic. Fantasitc results. This was before the AMMO ceramic came out. Easy to touch up every 3 months. After I had done this discovered the original AMMO for the low low cost of about $60. Professionals were suggesting that I remove the Mothers spray on. I had spent so much time doing it and the results were very very good so was happy enough. Two days ago time came to random orbital in prep for the AMMO. I used medium Meguiars compound to remove old ceramic and mild water spots, alcohol to remove residue. Put on 2 coats of AMMO ceramic ( over 3 years old). So easy to apply and remove after 5 mins. Waited 2 hours between coats. Curing now, for 4 days. No detailer would answer question on whether old unopened product was ok to use. It most definitely is. Pending final results but the product speaks for itself. It is all about the prep. Of course there are improvements over time but the price has tripled. Still a bargain. I only used half bottle on 2 door coupe. Will wait the 4 days and rinse off. Hoping to see amazing beading and sheeting. Took me about 4.5 hours and I am slow... but methodical.

Great video! The depth of shine is amazing! Congratulations on another great product.

Thanks Larry! Can’t wait for your polish to be released too

I love seeing that Blackwing in the background!!!

Man I remember back when you bought the 964, looking great here Larry! Can't wait to try this one out, I loved the first Reflex Pro so much

I've been stoked with the performance of the original reflex pro so I can't wait to try out the new one!

Love your videos. Looking forward to your polish hitting retail

Great video larry. I've been waiting for reflex to come out for years

Congrats for your new formula🎉

Looks like a TREMENDOUS product! I think I'm going to put this on our Vette once I get it polished up.

I love this Porsche especially in that Bentley black. What a awesome shine.

Very well explained...

I love your videos and can't stress enough about how educational and thorough you are! When are we going to get a video of that beautiful Cadillac in the background of this vid?

Ordering now!!!

I just ordered Reflex Pro in my last order but will need to add Reflex Pro II in my next order. I am a huge fan of these products... Reflex Pro layered with Skin Defense.

Hey Larry, excited to try it out! Have you ever considered developing a top coating (maintenance spray) that pairs with the original Reflex Pro which sheets water instead of creating beads?

Can’t wait to try it! Is there better water spot resistance than compare to reflex pro?

OK good I'm glad you touched bases with us on single stage...

This man is literally so obsessed in such a good way. Love every single product Larry, thank you for everything you do!

Dang perfect timing. I was looking at buying reflex pro soon. Last year i used the chemical guys ceramic stuff and its still holding up, but i wanna try this.

@behindthen0thing

Жыл бұрын

Is reflex ceramic

Hi Larry, congrats on the new product! A question: is it as forgivable and easy to apply and buff out as previous Reflex Pro? Meaning, if you miss a spot while wiping off and the product dries out, do you have to polish that spot to take it off? IIRC, with Rexlex Pro you could just reapply the product on that spot, let it haze and wipe it off. Could you please also talk about expected longevity and how to remove the coating after some time?

@ftmhome

Жыл бұрын

I have the same question.

@AMMONYCSTUDIO

10 ай бұрын

Depends on humidity and cure time. If you miss a spot during the application, yes you can likely lift the "high spot" with your applicator and a little coating. If the high spot cures, it will likely need a light hand polish to remove. I would expect 2 years protection with normal conditions/maintenance. The coating can be removed with polishing or clay bar after its active life cycle.

@camryt

10 ай бұрын

@@AMMONYCSTUDIO Perfect, thank you for your reply!

Great video, Larry and thanks for your quick response to my email. I’ll be buying this for both of my cars.

Can i apply this over my existing ceramic coating

Does ceramic coating ur windshield make t grabbier. My winsdhield have been catching lots of fusts lately. And i have had to clay it quite a lot, else the wiper feels as if its running on dry or on sand paper. I also use glaco water repellent. Is there an alternative for clay on the windshield something chemical base and not physcial.

@Larry i always wonder why dont you promote your products more? Does it have to do with inventory and maybe you dont want to sell high volume? Great video as always

Hi Larry, I'm an original Reflex user from 2016 and haven't applied the Reflex Pro II. How would you compare the process between the 2? So many "horror" stories when applying ceramic coatings with streaking and product not being level etc. I have recommended Ammo NYC products to car enthusiast friends and have been out of the car care game for few years and now have a black luxury SUV that is used for airport transportation and frequent washing isn't practical so I have use a drive thru car wash. I am planning to get the paint corrected and ready for Reflex and then add a polymer on top then a paste wax. Anything I might be missing? Thanks and love the products

Is this good to use on single stage paint early 90’s ?

Do we need to take any type of precautions for our lungs when applying this? I saw the mask at the end. Should we use a P95 mask?

Would there be a windshield coating from AMMO?

What would you recommend for Volk TE37SL in blast bronze which are a matter finish wheel???

How long does the protection last for?

Looks amazing. Can the buff-off towels be used again, or does it stay in the fibres even after a wash?

@smiles564

8 ай бұрын

I want to know too

@peterb4143

6 ай бұрын

Depends. I pressure wash the towels first and then throw them in the laundry. They seem fine but they probably will scratch paint worse then a brand new towel so up to you to decide that risk factor. Other wise they can be used to clean wheels calipers exhausts interiors or other things that aren’t scratch sensitive. I’ve pressure washed and cleaned the blue applicator pads after hardening for months and they were totally reusable. hope this helps

Wish there was a way to get your products in Europe without spending a fortune on import taxes and shipping

I'm curious how many applications it would take before you could actually see a thickness to the product. It's a dumb idea because no one would ever put that much on, but I'm curious none the less

You can't just show a massive spider at our screen like that man??? What is wrong with you XDD I almost died

Have you still got ppf on the car?

Quick question... when you buff it off (after curing), should you chuck the microfibers? If not, what do you suggest they be washed with before using again? Thanks!!

@behindthen0thing

Жыл бұрын

Maybe, maybe

@AMMONYCSTUDIO

Жыл бұрын

If soaked and wash immediately should be fine.

Quick question Larry: Do you have to polish, or can you apply knowing your paint has some imperfections?

@franksattler6053

Жыл бұрын

Yvan Lacroix, and Larry have mentioned that if you want a coating to last longer preparation is key. At least, polish to clean the paint, you do not have to take out the scratches if you do not want to. I would email Larry and see what he says.

is link updated on website?

Can this liquid be applied with a spray bottle and a thinner MF towel? I feel like some of it gets absorbed into the sponge and is lost

Question, why the need for mask, glasses, and gloves while applying this? Is the original version less harmful(seemingly)? I have a new vehicle coming in and want to coat it, but the PPE need here stands out. Thanks!

@VladiDusil

Жыл бұрын

He wears PPE because he is around those products every day for months or years at a time. I am sure if you apply the coating once every couple of years, you don’t need to worry about exposure. I applaud him for being cautious.

Maybe I missed it, but I'm assuming that Reflex Pro II over vinyl stripes would be okay??

@AMMO-NYC

10 ай бұрын

Yes, works great on vinyl and decals

What's the song that plays at the end, and who's the artist?

Can this be applied outdoors?

@AMMO-NYC

10 ай бұрын

Yes, out of direct sunlight. Needs minimum 6 hours of dry (no water) cure time.

Is reflex pro a ceramic coating? Do you believe in ceramic coats

As soon as I bought the reflex pro…reflex pro II showed up on the market:(

@peterb4143

6 ай бұрын

It be that way sometimes haha good news is when the coating wears away in a year or two then you can try it out I actually switched from reflex pro to adams graphene just to try something else but think I’ll go back to reflex 2 next year

Hi Larry! I was wondering if you can apply Reflex Pro 2 on matte finish paint? Love the videos keep up the good work!!

@AMMONYCSTUDIO

10 ай бұрын

Absolutely, I coated a matte M4 CSL on the main channel couple weeks back

Nice!!!

ct5-V 👀

bro GIANT SPIDER IMAGE??? WHY?

Haha

🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙🏁💙

This episode is where Lab 🧫 🧪 🥼 Larry come out. Not just the detailer. I love the gloss shown from the result

@AMMONYCSTUDIO

10 ай бұрын

Thank you!