MAN, ...you have no idea how much money you have saved a lot of us that are not to lazy to get our hands dirty! thanks!

Very informative and well presented. Thank you for taking the time and effort to make this video and share your knowledge with everyone. God bless you.

You sir are a legend! Simple and direct answer is what we all need! 🙏🏻 god bless !

You explain the systems, most clearly, and show method of your problem solving brilliantly. God Bless, and well done.

@proclaimliberty2000

4 жыл бұрын

sam mirison Thanks a lot I really appreciate that 👍😊

Diagnosis is everything. You do a great job, and very informative. Thank You.

Thanks for the clear and succinct explanation on how to troubleshoot an ABS light code.

Great video. You were very clear with your instructions. Thank you

Nice job! Very informative! Nice detail in your diagnosis. Thank you!

Great explanation and simple step by step guide. Great video

Thx you always give the most informative and detailed info on repairs keep up the great work.👍

Nice work, thank you. This is very helpful and thank you for not adding music in the background.

Awesome info, should have watched before I bought my ABS sensor....

This was so so helpful. Straight forward and yet covered so much. And I want to get your reader.

This is tremendously helpful . When I can see what you have described and you explained. the subject matter quite well . I say yes .

Thanks for teaching me something new and down to earth.

Thanks I Love How Simple You Explain How to Diagnose the problem.

@proclaimliberty2000

3 жыл бұрын

Dave Obrien 👍😊

This is very informative . I have a 2005 PT and the ABS and TRAC WARNING LIGHTS came on after going through a car wash . I am sure that this is water intrusion and that I just have to disconnect the sensor(s) and clean them with electrical cleaning spray .

Found this old video. It is very concise and to the point. subscribed at once

Hello, thank you very much for the presentation and informative video. I'm getting a mph reading on two wheels and a rpm reading on one. On the wheel that I'm getting the rpm reading is that speed sensor broken? Thank you!

This was the clearest explanation on the ABS repair that I've seen. Thank you, and God Bless. 🙏

@proclaimliberty2000

3 жыл бұрын

👍😊

@jhargrove1108

10 ай бұрын

There is no god. Keep your beliefs to yourself.

@gergemall

6 ай бұрын

I agree. I was here a couple years ago. Never got round 2 it

Man! You Rock. ....will be sharing with ALL OF MY FRIENDS!

Thank you for that video, I'm a step closer to solving my ABS problem. BTW, VW's frequently have a ring of magnets on the back of the bearing hub and a Hall effect sensor, rather than the toothed wheel and magnet pickup. I've already changed the bearing and sensor, but am still not getting any speed reading from the data stream, so a wiring check is next on the list.

ABS are so common on my volkswagens. The assumption is *always* the speed sensor. When taking to vws to dealers, like I did this morning to find out which one of the sensors was bad, the mechanic was getting varying signals... so he just said, "They all need to be replaced. $754 please." Nope. This video is great... narrator is great... detailed and thorough (i.e. not just default to replacing everything like the dealership mechanic who assumes i have bottomless wallet). Liked and subscribed. I will Never Fix Another ABS Light Until Watching This -- Again. God Bless.

@proclaimliberty2000

4 жыл бұрын

Island -- Island -- Island 👍😊

@aaronjaggan

Жыл бұрын

So it could not be the sensor even though they replaced it and it works?

Man I like him he showed us were to set the tester they don't on all the other sites gonna fix my abs tomorrow

@proclaimliberty2000

4 жыл бұрын

William Baldwin 👍😊

Thank you for a DIRECT ANSWER. No stupid music and light shows ..yada yada yada.. Great video !! Thank You very much !

That explains a lot and is greatly appreciated. I'm taking my Jeep to the Dealer to have it checked out but that gives me ammunition to not get ripped off. Great video

@proclaimliberty2000

4 жыл бұрын

rhshel 👍😊

@josephprainito662

3 жыл бұрын

Not every dealer is a rip off. Unfair of you to suggest that

@trini_boi2414

3 жыл бұрын

That's how stealership make their money by ripping ppl off been there done that

@protoolsoutdoorss4302

2 жыл бұрын

I Iud

Very informative thank you. And it was clean too.

Another great and Cristal clear video from you. Thank you. We'll done master.

Thank you! Blessings.

Awesome video sir super helpful thank you! 👍👍

Plain and Simple ! Thanks .

@proclaimliberty2000

3 жыл бұрын

👍😊

Excellent analyses

Great Simple and to the point, Thank you

Thank you,very helpful. God bless.

Thanks so much Sir for sharing ABS trouble shooting.

@proclaimliberty2000

2 жыл бұрын

👍😊

EXCELLENT VIDEO ! NOW I KNOW THE LOCATION OF REAR SPEED SENSOR LOCATION. FOR A MINUTE I THOUGHT IT WAS BEHIND THE DRIVER SIDE OF THE VEHICLE. AS I STOOD IN FRONT OF THE VEHICLE. SO IF I STAND BEHIND THE VEHICLE THE RIGHT REAR SIDE OF THE VEHICLE STAND BEHIND PASSENGER SIDE OF THE VEHICLE.

Thank you very much.

Can thank you enough for the time spent in Making this great video.

@desijrichert

3 жыл бұрын

It's "Can't thank you enough", Jeez.

Easy and clear to understand. Wouldn't you have to run a drive cycle after clearing just to be 100%?

You're terrific doing this thanks a lot God bless you!

@proclaimliberty2000

4 жыл бұрын

Gerard Donaire 👍😊

My cruise control is non operable also (same time as abs) will run your test tomorrow thanks !

Best ABS video yet... Many thanks!

This great....tnx for the hint of troubleshooting abs faults.👍🏼

@proclaimliberty2000

4 жыл бұрын

Jack Coleman 👍😊

Well done. Excellent video and information!

@proclaimliberty2000

3 жыл бұрын

👍😊

Thank you so much for this 🙏🏽

Very informative Thanks

Thanks alot your amazing finally clear instructions and i understood everthing.

@proclaimliberty2000

4 жыл бұрын

Omar Nunez 👍😊

Great video. Thanks for posting.

Great video, brother!!

Nice simple and straight forward

Great content Unk!👍

Great video, to the point, clear and good sound. Gid bless

Wow. I wouldnt have thought to tell my mechanic to try just a new wire first. Thanks for this.

Hi good video, if i want to test the sensors what resistance ohms should i get from a good one please, thanks

Good video; thanks!

I learned a lot! Thanks!

@proclaimliberty2000

3 жыл бұрын

👍😊

God bless you too brother.

God Bless! Watching here Al Khafji Saudi Arabia from Philippines...

@proclaimliberty2000

3 жыл бұрын

👍😊

Well presented

Fantastic Edification!!!

@proclaimliberty2000

4 жыл бұрын

Emanual0607 👍😊

awsome, short video tons of info and examples good work

FYI The "arrow with the plus sign" on your multimeter is the symbol for checking Diodes. (they conduct current one way but block current in reverse). The same switch position is also used for continuity.

nice video! Very explainatory

Very helpful demonstration professional way.thankyou 🙏💐🕺🔧⭐⭐⭐⭐⭐

@proclaimliberty2000

3 жыл бұрын

Francis Dsa 👍😊

crystal clear woice and thank you big time

Very nice sir.your Method of explanation is good

@proclaimliberty2000

4 жыл бұрын

sajid ali Thanks! 👍😊

New subscriber here, Great video, clear explanation, and in focus video thanks for the help

Good job Brother.

Great, thank you

@eliassalazar5802

3 жыл бұрын

You guys are great very helpful and so easy to understand thank you

Amazing 👏 good job sir never asking for advice again till I check with you sir... got a subscriber 😁

Very helpful, God bless you more 🙏

@proclaimliberty2000

2 жыл бұрын

👍😊

You have the patience of a saint. Thank you!

@proclaimliberty2000

4 жыл бұрын

Airmanmx1 👍😊

AWESOME JOB BUD!

Great technical overview thanks - It would be very useful to know which brand diagnostic scanner you used that gave the live speed data from each wheel? Thanks again.

I need to try that this year.❤

Thanks

With ABS there are usually three common faults. One is the sensor, another is the wiring the last is the tone ring. Unless it has cracked its not often the tone ring. You can meter the sensor to see what it is reading, the normal reading can often be found for reference on the internet. If the sensor meters out, it is highly likely to be a wire or a junction not allowing the correct operation. By checking the voltage against the other side, as shown in this video, the wiring can soon be diagnosed. All in all a good instructional video.

Omg thank so much for your video I would of been stuck all in sun with nothing to eat to drink or eat

@proclaimliberty2000

3 жыл бұрын

👍😊

Hi thankyou for your great tutorial on ABS light stays on.. Australia 👍

@proclaimliberty2000

2 жыл бұрын

👍😊

Great tutorial for DIY

@proclaimliberty2000

3 жыл бұрын

👍😊

You rock brother.

Very good, thanks.

@proclaimliberty2000

3 жыл бұрын

👍😊

Thanks. I like the "Cotton-uity".

good stuff man

Thanks for this info. video. I got a question. Abs, traction control and tyre pressure lights on my toyota proace (2019) van stay on. These lights appeared first after i had the van parked for a week. The lights went off almost the whole day today then reappeared. Toyota says rear abs sensors are broken, while they do seem intact and if they were broken, the lights wont go off randomly. What do you think the issue might be? Cable issue?

thank you so much for your great video! lm having trouble with my 2013 Lexus rx450h. trouble code c1391, low pressure at actuator....is this a dealer only fix???

Thank you sir thanks for the telling check merhods

@proclaimliberty2000

4 жыл бұрын

jamila Azad 👍😊

Great video. Thanks. New subscriber

Great video 👍

I'm curious as to the exact diagnostic tester you are using here? I need that one!

@2:30, I'm getting a reading of 0.01 with ignition switch to "run" position. I got the same reading for both front. Any idea what it can be? Both the ABS and Brakelight are on. Brakes so far seem to work fine.

Good video. At 2;32 you test voltage and I am wondering why there is voltage. I thought voltage is generated from the sensor when the wheel is turning which flows through the connections to the control unit. So there should be no voltage til wheel turns. What am I missing? Thanks

Hello 👋 great video

Thank you sir!!

@proclaimliberty2000

4 жыл бұрын

Sgt. Hollow Point 👍😊

@donnakidd5825

3 жыл бұрын

Ass

And thank you always

Good job

Thanks for info sir.

@proclaimliberty2000

4 жыл бұрын

Luis Delgado 👍😊

Thanks for that

Do we change abs box the dashboard appears asb light ? Thank!!

Nice one very good video