Nice vid as always! FYI, the helio did not have 2 gyros, it had 2 processors.

@leelifelonfpv1375

4 жыл бұрын

FYI It has 2 gyros as on the webiste mentioned

@JoshIsReallyAwesome

4 жыл бұрын

Lee LifeLon FPV not sure what website you are referring to but the Helio boards only had one gyro and two processors: an F4 running normal flight controller stuff and an F3 dedicated to gyro filtering.

@leelifelonfpv1375

4 жыл бұрын

@@JoshIsReallyAwesome click on the website in the description. Its the flight club website

@JoshIsReallyAwesome

4 жыл бұрын

Lee LifeLon FPV dude. I’m not talking about the Talon F7 Fusion.

@tehllama42

4 жыл бұрын

@@leelifelonfpv1375 Josh is correct - the Helio had a single gyro, with an F3 procesor dedicated to running the filtering, and an F4 handling the rest of the FC duties. Whatever the site description states, that's how it worked. Either way, the Talon is awesome, and to be honest for racing the F4 V2 with Pit Switch is all you need - the things fly absolutely amazingly well with just that, and you don't need more.

Pretty beautiful build, dude! 😃 The frame is really beautiful!!!

Really great build video!

So CLEAN! great video!

Great stuff Mike. My Neutron-R frame arrived recently, looking forward to building it!

I like the frame and the custom prints a lot... camera and cap part are well designed and suit the frame's look.

Nice build, very clean. Congrats on good content.

Good stuff Mike. Attention to detail is part of the game! I REALLY like this build.

@tehllama42

4 жыл бұрын

These things really go together that well, and I have to agree with the part choices. Mine are all different builds, but the frame/ESC combo is pretty much 'the' answer

Awww man, the proton frame was awesome, now i going to have to get these 2 frames, love the frames flight club!

@FlightClubFPV

4 жыл бұрын

thanks bro! check out the PROton-R if you are using 30x30 parts

So cool build

Love your channel 😎

Doh! Wish I would have seen this video before I put in my order like 30 mins ago. Those half plates for the vtx would have been perfect.

+1👍 experience shows, thanks Mike

I wish I'd seen this before I built mine.. my FC has m2 holes. Made it a pain in the tail to get the parts secure... that little recess area in the necleus plate is handy.. I almost want to go re rout my wires after watching your assembly

wow very nice

Gotta love those Xilo motors. I love the 2207 1750’s

@FlightClubFPV

4 жыл бұрын

cheap and fly great!

@tehllama42

4 жыл бұрын

Those party - not my favorite though. I'll run the other brotherhobby R5/6 variants over those, mostly for aesthetic reasons.

Nice clean little build 👍 Any tips on how to start a website if one were to start selling a self designed frame?

Great video. Just a little criticism though. Kind of dangerous leaving your wires for peripherals ie vtx, cam, and receiver a little too long having bare wires exposed. Maybe its just me but I always try to make it a point to keep the insulation all the way to the solder joints.

such a nice clean build. I have to say, i always try to build like you. simple and clean. I orderen a couple Flightclub Frames. But the Neutron-R or Proton R i cant find in Germany//Europe. I would love to rebuild this one

@FlightClubFPV

4 жыл бұрын

thanks! HobbyRC in UK will have the frames within 2 weeks

@steffenfpv5579

4 жыл бұрын

@@FlightClubFPV oh okey, i have to check if they ship to me.

Great, building the exact same setup except for the motors. Would you mind sharing the cap holder file? 🙏

Really good build thank you :) Also, where can we get half 20×20 carbon fiber plate to mount the PRO32

@rodrigo125

4 жыл бұрын

Here you go mate! fpv-flightclub.com/products/half-vtx-carbon-fiber-plate-20x20/

Hi Mike! Awesome video! Cant wait for the PROton-R to be back in stock! Do you sell the half VTX mount for the Proton-R? only found the 20x20 one... And what about the cap holder? i dont own a 3d printer ): Thanks for the video and awesome support!

@FlightClubFPV

4 жыл бұрын

proton will be back in stock next week. no i don't have that half mount for 30x30 but i'll order it in the next batch of frames. thanks!

Where's part 2? The people demand answers! :)

@JoshIsReallyAwesome

4 жыл бұрын

Btw, I just built 2 neutron-r’s with the help of this video. Used talon f7 fusions as well

whats up w the bangkok frame? still waiitng

I refer to your videos. I bought two Talon f7 with MPU6000 and Fusion, but neither motor 4 works. ESC is Talon's Gigawatt and there is no problem here. It looks like you've been using Talon f7, but have you ever experienced such a bug? I bought it again because I thought it was an initial failure because the FC I bought was defective. Is it a problem that can be avoided by setting? Do you have any good ideas?

@zeizei7950

4 жыл бұрын

From Heli-nation site, use cli-commands: Resource MOTOR 6 None Resource MOTOR 4 C08 Save

Very tidy build 👍. Quick question, when I plug in my lipo(4s) I get a spark sound 😮, it hasn’t been a problem, just wondering do you know why it does that ?

@gavlarfpv7841

4 жыл бұрын

rory oconnell 6s cracks even more

@roryoconnell9424

4 жыл бұрын

Gavlar FPV it’s normal so?

@FlightClubFPV

4 жыл бұрын

yeah it's normal. just plug in faster :)

@tehllama42

4 жыл бұрын

On 5S and 6S, it just gets louder. Something useful you can do is adjust the prongs on the male side of the xt60 connector to make sure they have the right tension - either collapse them down, or use a small phillips screwdriver to spread them out so you get more consistent contact when you're plugged in (and less likely to come unplugged in a crash), as that helps too.. Other than that totally normal. Smoke stoppers are still awesome on fresh builds, as that's the only other time inrush currents can ever be problematic.

@PaulHodgetts

4 жыл бұрын

You have a capacitor wired across the VBAT +/GND, right? Probably what you're hearing is the capacitor charging up. It charges so fast it's like a short across the VBAT/GND for a few milliseconds and sounds like a pop. Totally normal.

Where is the capacitor holder on your site?

@FlightClubFPV

4 жыл бұрын

i just posted it! fpv-flightclub.com/products/neutron-r-capacitor-holder/

My goodness. I dont think ive seen a cleaner build.

@daltron4000

4 жыл бұрын

get fucked

what happened to envyastro?

@BikeGuyFPV

4 жыл бұрын

And Sedhendo too.

@FlightClubFPV

4 жыл бұрын

envyastro is hustling at his business

@tehllama42

4 жыл бұрын

He finished with his bachelor's degree, and is grinding hard on new adventures. I do look forward to hearing from them again soon.

Frame is out of stock ...... wow ......

@FlightClubFPV

4 жыл бұрын

the red and purple nucleus plates are out of stock until about next week. the grey are in stock now.