DJI FVP Build : HD Drone Racing!
Тәжірибелік нұсқаулар және стиль
A customer sent me the DJI FPV system and all the parts to build for him. I couldn't find any good build videos so I decided to make a DJI FPV build video.
Want to learn how to repair electronics like a pro? Forget wasting years going to school to get an electronics degree like I did. Don't waste time with history and economics, just go straight to learning how electronics work and how to repair them. Check this out - bit.ly/2Loej31
Check out the website for the build post: fpv-flightclub.com/dji-fpv-qu...
Parts used in this build:
PROton-R Skeleton 5" Hybrid - tinyurl.com/y48th3rd
Fixed Camera Angle Mount - tinyurl.com/y3u4cggk
Custom Antenna mount - tinyurl.com/yyj6lm4s
Tmotor F55A PROII ESC - amzn.to/2NFyRTs
Tmotor F4 Flight Controller - amzn.to/2LiRNEC
Tmotor F40 III 2400kv - amzn.to/2NGP6Qe
DJI FPV Fly More Combo - amzn.to/2L02u0h
Camera and antenna mount files available on Thingiverse:
Camera - www.thingiverse.com/thing:386...
Antenna mount - www.thingiverse.com/thing:386...
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
-------------------
Current Quad Setup
FlightClub Neutron-R - tinyurl.com/yyd2bjw3
Aikon AK32 20X20 ESC - tinyurl.com/y77ch6jt
Talon F7 Fusion Flight controller - tinyurl.com/yxfvn8dv
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
XILO 2205 1750kv Popo PRO - tinyurl.com/yxha83g3
TBS Unify PRO32 Nano - tinyurl.com/y5z2nf7j
Foxeer Lollipop Stubby - tinyurl.com/y5yh9bzs
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
My Video Equipment:
Main Camera - amzn.to/2SsBabY
B Camera - amzn.to/2SbvZNT
Favorite Tools
Weller Digital Soldering Station - amzn.to/2JngsXg
Dewalt Gyroscopic Screwdriver - amzn.to/2EOwLOq
Anker Powerhouse - amzn.to/2JGbOUz
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - / fpvflightclub
Follow us on Instagram - / fpvflightclub
Пікірлер: 140
Thanks to your customer for having you build this. Thanks to you for sharing your build with us.
Wow.. thanks for this elaborated video. The whole process was done with ease. Thank u. Keep flying
Fantastic video! So concise and well edited! No fluff! Just great content! Way to go, Bro! 😁🤘
One of the best DJI FPV videos I've seen yet. great work
lovely build, thx for vid , probably the first build ive seen for the dji fpv... :)
Great vid- I'm looking more seriously into this for my second drone. Well done and many thanks.
this is one of the best build video's i've find to build DJI FVP and u show a battery to keep up the good work and when i get my kit i will be watching your video a few times to build me too
Beautiful build, dude! 😃 Yeah, the system looks fantastic!
Awesome build, thanks for sharing
thank you! you've cleared up so much missing information
Oh ya love flight club, nobody does what Mike does and that’s what sets him apart from the rest. Go FLight Club.
Love that track in the drl sim. Great build vid. I got to try one of these out at our race Sunday. Awesome video in the goggles for sure. Game changer.
@FlightClubFPV
4 жыл бұрын
yeah it's unreal seeing race video that clear
@archer4922
4 жыл бұрын
FlightClub yes it is. The image is soooo clear compared to analog. See so much more of the track compared to my normal ccd cams. But there are some nice cmos cams that look better than the ccd I just need to find a good one that isn’t $45 lol. I’m liking the runcam nano cam and If I could find a micro cam that’s similar to the nano or better than the nano id grab a few. I’ve got a Predator v2 in my hawk 5 I love the image but it’s a little on the blue side even after adjustments. But gates just pop in the screen with that cam the white mgp gates and yellow quaddiction gates are so easy to see. Any suggestions on some good cmos micro cams?
Excellent video. I'm keeping this one.
This build is so clean! My always look so complicated...
Great video! Please consider making another video about building a long range FPV drone using 7" frame or larger.
omg this is the video that look for, thank you so much for uploading dude. finally i can build on my own. because many channel too many talking shit. and you doing great job straight to the point. and thank you so much for great explanation 👍🏻
@nes.torfernandez
4 жыл бұрын
Kenny Dimitra do you finally build your own following the instructions?
Nice build thx for video
great video man, as always!
Great video build!!!!
You basically answered my question I had about this drone lol!! thanks for the video!! I just want to use it to attach a go pro so I think this one is good
@mikeybroe1
2 жыл бұрын
no
Love you info vids bro they rock!👌👌🤗🍾
@FlightClubFPV
4 жыл бұрын
thanks man!
@gabyguay6990
4 жыл бұрын
@@FlightClubFPV agree :)
10/10. Ive been binge watching FPV drone videos all day and this has been the best/straightforward how to build. Just curious, how much would the total for this exact build cost?
I paused a moment when you wired the air unit's power to vbat before realizing that this is a 4s build. We have to keep in mind that the air unit can't take 6s voltage in. If anyone intends on running any more than 17 volts, you will need to run a regulator to power the air unit. Great build Mike, as always!
@FlightClubFPV
4 жыл бұрын
oh yeah, good point. it can take battery voltage up to 4s only
@tehllama42
4 жыл бұрын
If you have to, any old 12V UBEC will do - and you can slap a 16V 220uF capacitor on the output, then feed the air unit straight from there.
@magnusfpv7765
4 жыл бұрын
wanna make 6s drone so i need capacitor on 6s battery to work with dji air unit? Thanks for help anyoone
@chaserporter
4 жыл бұрын
@@magnusfpv7765 You need a step down DC Regulator or BEC. Search for Matek 2-8s Micro BEC with a 12V output. Racedayquads has one for $5 that would work perfectly.
@magnusfpv7765
4 жыл бұрын
@@chaserporter and what if i use T-motor F4 OSD Flight Controller & F55A PRO II BL_32 DShot1200 4in1 ESC Stack for RC Drone FPV Racing it have 5v/2a bec power for camera receiver and other equipment?
Good stuff always
Thank you for the video
Thank you 👌🏻
Very nice
Good Day great video I have a question the Fly controller its possible use F7 I see in the recommendation of DJI say F4 HD F55A PRO II but a F7 what do you now about this
Hey buddy, at first a nice Vid. I have a Question: is that quad for 6s or 4s ?. Cause i know the DJI AirUnit need max. 17,6V . And a normal 6s LiPo gives over 20V...it looks like the 6S LiPo in your Vid. Greetings
hey Chris, i bought this system from you a while ago...great video btw. I would like to point out one thing though: IT IS VERY VERY IMPORTANT TO SET THE DEVICE PROTOCOLL IN THE DJI GOGGLES TO NORMAL..otherweise betaflight will not recognize the DJI remote. just thought i could save some people some time :-)
Fantastic video and very clean welding... btw, I've seen that most of the people also use a capacitor to reduce electronic spikes together with the battery, but in your video you don't.. Did you find any problem while flying?
Thanks dude
So, this makes me ask - is there a chance of a Proton-7 frame, or similar 7" frame with extended nucleus plate set up specifically for this a possibility? I think the possibilities of long range and endurance flying using the air unit 4:3 recording and some post-processing to make some ridiculously cool videos
Where do you mount the battery ? Sorry noob here. Badass video thanks for the tutorial.
holy molly that moment when you realize you've flown this track on DRl 😁😜
nice ,thanks
Hi, thanks for the video. I would like to pair the hd stack with t motor f80 2500kv on 4s. What do you think?
I like it!!!!!!!!
Having flown a quad with the dji unit in it......all I can say is I want one! The video is insanely clear, and awesome to see. Just need price to come down a bit more. One thing to note though....a set of patch antennas seen to work so much better than the stock antennas, or axii antennas
Will the 3d prints work with the regular proton? That air unit looks unsecured like it’s going to just fly off the quad in a crash.
You sharing the 3D parts you made? AWESOME btw!!!
@FlightClubFPV
4 жыл бұрын
sure why not. i can upload to thingiverse tomorrow
@RobertTheFriscoSchmid
4 жыл бұрын
@@FlightClubFPV thanks a lot
with your set up, are you still able to use the OSD? In your video, I saw that you turned it off and im wondering if you did that because you didn't want to use it?
FINALLY, a nice installation like always. What about to use 6s? with a Bec? And I hace seen RSSI and GPS in a video, How will it posiible? THX in advance.
@nes.torfernandez
4 жыл бұрын
#Gabyguay69FPV # by bro do you found a solution for 6s?
@gabyguay6990
4 жыл бұрын
@@nes.torfernandez I have ordered a BEC matek (3 pieces) 1 for matek,1 for ar unti. there is a forum in facebook very ussefull, join it!
I'm new to the FPV aspect of DJI, but have a few Phantom controllers. Can I use one of them to connect to the FPV system? If so, how would I do it?
it works fine if you are using IMD6c. Raceband 6 isn't used in that set.
Dude, i got problems with no Voltage from the FC in the goggles...you showed me the hint!!! THX
@urhe4547
4 жыл бұрын
Joerg Schueller ho did you solved this problem?
@joergschueller_teamspieltrieb
4 жыл бұрын
@@urhe4547 aehhmm..i think it was just swapping the rx & tx...
hello Can You give me some advise what's system I can used as autopilot? Or this setup does include?
Hey there. I am just starting to build my first drone and was thinking of using your video to do it. However, I was wondering, what batterie are you using for the kit itself. If you could give me that info I would be grateful. thank you so much for your time.
@flightclub newbie here can you please do a follow-up video for this build that talks about the best battery to buy and where/how to mount? I want to buy it all from your store and this is the only part I'm unsure about.
@pilot_j_j
4 жыл бұрын
Hello? Where/how do we mount battery? Can we mount OSMO Action?
thxs for the video! i made also one but i used the tmotors f4 fc with the connectors so i dont had to solder between the air unit and the fc. but now i dont see the power indication of the aircraft in the goggles. instead is marked n/a. can you help me?
I wanna make 6s drone so i need capacitor on 6s battery to work with dji air unit? Thanks for help anyoone
Good
When we are usikg a taranis do we hav to use a external vtx?
how do you reset the trims on the reciever if there doesn't seem to have any trim buttons on the dji remote out of curiosity?
I am trying to build my first FPV drone ever, i would like to go with DJI FPV System but I want to build a 6s, with astrox x5 body, lumenier 2207-11 1750KV My question is can I use XILO Stax Combo 45A BLHeli_32 6s 4-in-1 ESC and F4 flight controller with DJI FPV System? If so does it support play and plug or do i have to solder the dji to XILO flight controller? Thanks in Advance.
What’s the empty/all up weight of your build? Looks really clean!
@FlightClubFPV
4 жыл бұрын
i just measured, with no props, or battery it's 323g
And, what battery you will recommend ?
thanks for the vid man great info. possible to share the stl files for the antena and camera? TIA
@FlightClubFPV
4 жыл бұрын
yes i'll post on Thingiverse
Hi, i will build this drone, but what about props?
what do you charge for builds like this?
Recommended Binding Order 1. Air Unit & Goggle 2. Air Unit & Transmitter
The frame you used for this build, your website list many options. What exactly have you used regarding options?
@jonitan76
4 жыл бұрын
check the description. all on the list up there
if I wanted this exact thing how much would it cost me?
I have a question, and I think I might have waste a bunch of money on this, my elevator is inverted, so when my right hand push up, my quad tilts back, and push down on my radio, my quad goes forward, how can I change that, I can just change the weight on my Taranis in the mixer page, how do I do it for this?????
i just got the setup and connected it to my quad. everything works but it only shows 1 bar of signal when the quad is right beside me. when i walk like 5 meters away, the connection totally breaks off. does anybody know what's wrong? The antennas are plugged in..
What i really reaaally want to know , and Fyi i searched everywhere but couldnt find na answer , is if you can change the sticks of the remote DJI controller ?? I am left handed and ITs better for me to fly like this . Thanks
@FlightClubFPV
4 жыл бұрын
i don't know. i just measured and the gimbals use 3mm. taranis is 4mm
If I buy the system! Would you be able to build me one? I know nothing about FPV world and would love to get into it!
I also had the question I read others have posted in the comments. Must be a 4S build. But with all these videos and tutorials on running 6S on a 4S quad, You had better contact your customer and advise them that they cannot do so unless modified. I have almost the Same Stack that I am building out at the moment. I was in a bit of a quandry, because the FC does not have a 12v pad for the Air unit. However there is an unused pin coming out of the ESC however I see very small on the ESC it says 10v however there is no wire in that hole on the plug, a bit strange... but instead of running a 12v Bec off Vbat, I put a wire into that plug and plugged in a 6s battery and tested it with the multimeter and sure enough 10V. So I am hoping this works out. Probably not the best place to post the info but if anyone else is here and wondering what to do on a 6S build I thought maybe it would help. However let me advise I am just building it out, so real world I don't know if its going to work. Actually going to plug in the Air unit and 6S battery right now with USB C connected and Register with the DJI tool (DJI assistant)
@nikhayes3396
4 жыл бұрын
Plugged in, Bound, activated and connected to DJI assistant updated.... Seems to work so far so good. On with the 6S build later.
Hey Mike hope all is well wheres Sed hendo and Ivan ?
You make good videos. I Think the system from Dji is not for me, i have the fatshark hdo
colourblind?
I bought the DJI FPV System one set including remote. I activated the goggle and remote with no problem. I soldered the Air Unit to my iFlight SucceX Micro F4. then i set it up in the betaflight. I followed your instruction. I opened the port Serial RX for the SBUS and enabled the SBUS in reciever tap, but somehow i can only receive Video but no signal from remote. In the receiver tab in betaflight show now (no signal received). One thing i did differently is that i power the air unit up by using the power from battery pad directly because there is no 9V output pad on my flight controller. Is it the issue? if it is i think the air unit would have already burn, but it is not. i still can see the video on the goggle. Please help!
@ALNDAddiction
4 жыл бұрын
Exactly the same issue here with a tmotor f4 FC
where is battery ?
so.... I just checked my proton r builds and EVERY single one I have the bottom plate backward. The arrow points to the back. What does this do?
@FlightClubFPV
4 жыл бұрын
you probably had a hard time lining up the arm screws, haha.
Dude, is everything ok? Where’ve you been
How much to build and send to Australia?
@jonitan76
4 жыл бұрын
maybe here www.nextfpv.com.au/
Must be over 250 Grams haha but nice setup!
Lol, ah I had to special order special order standoffs to fit the air unit. Cause nobody stocks 100mm standoffs.
Osd can be displayed on the dji fpv air unit ?
@FlightClubFPV
4 жыл бұрын
yup
@FlightClubFPV
4 жыл бұрын
i tried to record it but the air unit doesn't record goggle dvr with osd
@marwans4018
4 жыл бұрын
@@FlightClubFPV thanks
Love this, but dji goggle is too expensive for me
Is it possible to put a gopro on it?
@needlessgamer9644
4 жыл бұрын
Why it comes with HD camera
Can i use betaflight osd.
@FlightClubFPV
4 жыл бұрын
not with the dji camera and vtx. it uses it's own OSD
where i get every part dji dronw racing
@FlightClubFPV
4 жыл бұрын
links are all in the description
what is the max range ?
@woogieman02
4 жыл бұрын
Dji claims 4km
the first ever video i understand something i never understand anything
What happened? Subscribed and wondering if any new vids are coming.
@carveking
4 жыл бұрын
i wonder the same thing
If they ever match the DJI cam to a drone in a RTF package it will be permanent sold out.
@Tintin-dm4ym
4 жыл бұрын
Travis Stratton apart from the £900 rrp of the dji FPV goggles and camera alone, biggest rip off ever, give it 3 years and everyone will be doing digital at sub £300
@nick-dm3if
4 жыл бұрын
@@Tintin-dm4ym its not really bad, 800 bucks isnt bad considering how many shitty fatsharks i have owned
That's for sure so you can overcharge them for outdated equipment.
Its to bad that DJI did not make it an option to bind the Sbus transmitter to a Taranis
@cafub2650
4 жыл бұрын
What do you mean?
@johncarr123
4 жыл бұрын
@@cafub2650 someone needs to make a module for Taranis transmitter so we can Bind the DJI Air unit.
You don't have to be rich to fly the best gear in FPV. Speaking from experience you're better off starting with the best equipment available. Most of it is a one-time purchase..... $2500 will set you up FAT with the DJI system, a couple of quads, simulators, tool's, batteries, etc. The last set of golf clubs I bought we're $2000 plus $50 every time I play. We lose 2-4 thousand dollars in depreciation on a snow mobile every year. Buy the good shit!!!
Hi bro where did the seller buy the drone you assemble could you tell him/her plz bro pm me on Facebook Chris Hayden otis If i buy one of these im going to copy your assembling thanks it helps alot
I think the digital System is mutch better fr Freestyle, we have wait fr this! But we should wait what s comming up in the Future, DJI is the first Company there come whith it nd DJI can not be the Aple fr FPV, hopefuely. (:
Can't even put the right title..... Lol