Great job

Hello that's great job! Where can i buy this pump ?

Where did you buy the pump?

How did you built the special screwdriver?

how can i buy the tool to open it up please

i always use a marker in different collours befor disconnecting wires!!

Where buy for the modul board?

@benassy69

6 ай бұрын

You can find it on ebay. But my suggestion is to buy a defective unit and take out just the board.

Salut, eu am o masina Nespresso turmix, exact ca aceasta din video,si lasa prea multa apa din tanc. Sub masina se acuna apa multa. Poate sa fie furtunasul dintre tanc si pompa rupt? Multumesc

@benassy69

Жыл бұрын

Salut Elena. Este acea garnitura care se etanșează pe rezervor. Acea garnitura nu mai face bine contact cu rezervorul și apă se scurge pe lângă.

@user-ve2jm3tn6f

Жыл бұрын

Multumesc mult, am sa incerc sa desfac masina cu atentie. Salutari

@user-ve2jm3tn6f

Жыл бұрын

@@benassy69 Salutari! Cum as putea sa deschid maschina de cafea? Am vazut ca tu ai improvizat ceva.

My coffee machine Nespresso Krups XN2100 does not work. It turns on, then the two buttons stay on, when pressing either of the buttons I hear the motor working but nothing happens, the water is not pumped out. The boiler heats up. The flow sensor coffee machine receives water but it does not go out. Troubleshooting I did: - the fuses are ok, the diodes are ok, the resistors are ok - I replaced all the electrolitic and X2 capacitors, although the old ones were good What can I do next? Thanks.

@benassy69

Жыл бұрын

Hi. Hearing the pump (motor as you call it) does not mean it is working properly. It needs to make vacuum and suck water out of the tank. 1. Change the pump you can use a pump from a donor unit any caffe machine uses this pumps they are standard. 2. Clean the pump and grease it. I have a video on my channel on how to open it. After that try forcing water into the water tank ( push/ force water into the pump). This will overcome any air pockets.

@jjl986

7 ай бұрын

With water in the tank, open pod lever and push back, then press lungo button to clear airlock. Should work fine then.