Have ridden close to 60,000MI on the NC700X and on the road I have never needed to use the tool kit(mine is just like yours). you will find a flat tip on the other end of the phillips driver and the plastic thingy is the fuse puller, which you will find forward of the battery. The only glitch I ever had was when riding home after buying the second NC in Denver, the instrument backlight went dark a few times. The bike had been sitting for a couple of years and had a dead battery. All works fine now after 2 years and 32000MI. The best thing about this bike is many people have bought them hoping they were some kind of powerhouse of a bike, only to find a low revving, quiet high saddled bike that none of their HD friends would respect. Now those bikes are coming out of the back of the shed and hitting craigslist at under 4 grand. some having less than 5000MI. Hallelujah.

Lol... It's interesting you returning to blog after 6 years. The bike is great, it's used to be one of my favorite not anymore as I like more kinda aggressive bikes now. Good review, to the point. BTW, you two are cute together. Good bless both of you. Ride safe and enjoy the nc.

Good job Jennifer. You handled that switcharoo gracefully

I just bought this bike a few days ago. Thanks for teaching me how to lock my helmet.

You're very lucky. Great bike and a great girl. Thanks for taking the time to do the video. Really enjoyed it.

You got a great deal.Looks good. I am glad I bought new, because it is very hard too find a bike that was for sure not mistreated-as you know.. Congratulations. I will subscribe and follow you, bud.

Yep, a helmet lock cable, a double ended screwdriver shaft, the handle for that screwdriver, and the fuse puller are all you get in that pouch. That is what I got with my new from the dealer NC700X. I have added some tools, but not much fits in that small pouch. The most important that I added was a needle-nose plier to pull nails from my tire, a radial tire repair kit (repair plugs and insertion tool), C02 cartridges for an air supply for tires, the adaptor to attach C02 to the tire valve, and a cheap pencil type tire pressure gauge. The tire tools and a small adjustable wrench (mainly to tighten mirrors) are stored under the rear seat. After having two flats on my rear tire, I would never go anywhere without the tire repair tools! Good review! I love my NC, just wish it was shaft drive.

That is HOW you mount a bike with bags. So many guys seem to miss that.

Not a bad review from a young USA rider. Especially liked going over all the Honda accessories in detail! Hope it worked out well for you.

Great Video, I have watched a lot of videos on this bike, I think yours has answer the most questions I have on this bike. Sounds like you got a pretty good deal on it too.

Cool video dude really good deal on the bike with all the extra goodies. Got a red 2013 nc700x and I love it so far :)

just a few thoughts, written as I watch- -Excellent that you are showing features that Honda doesn't, like how the storage works -put an old sock around that visor! -I keep my insurance and registration in my helmet, not on my bike Will look into getting the side luggage option for my 2016, if I ever see one.

very good and simple to the point review coool keep doning the good work

how does the cases lock uses the same key as the motorbikes storage key?

pretty good review, good job man bike looks great

Man i hate it when the wind spoils everything. Dont blame the wind though.

What torch have you got and where did you get it from cus i would like one

I bought a 2012 brand new down in Mandeville Louisiana for 4,200. It did not have the side bags or trunk in the back but I love it!!! There are more tools that came with mine though! LOL Rode it from Louisiana to Concord NC for the first trip, 800 miles! It did great! Stopped in Alabama to check out the Barber Park Motorcycle Museum! I highly recomend it! Lots of awesome motorcycles!!!

@DjR3ina

8 жыл бұрын

+g3attack 4,200 what dealer shop ????

You got yourself a great deal great savings. Wish I were as lucky. That bike eqipped the way it is at least a 13000 value maybe 15 no?

Do you happen to know which color your topcase rear carrier is? I'm looking to buy one for my '15 NC750s. There seem to be 2 color options: Mat Altair Silver Metallic (D70) and Mat Bullet Silver (D30). These 2 names are very confusing, one color is more dark/black.

good review and your bike looks perfect ! funny when you got your girlfriend infront of the camera she did good ... keep up the good work and ride safely

nice bike thinking of getting one

Good job , nice bike. .Thanks

Mystery tool, fuse puller?

Dont mind me asking brother, Can the compartment at the front(helmet compartment) fit a dual sport helmet? Im just afraid the sun shield would get in the way for most dual sport helmet. Please advise

@g3attack

9 жыл бұрын

Razmi Daini It will not.If you leave the visor up on a regular helmet it will not close.

That white plastix tool is a fuse puller

About the Toolkit. There are two years of toolkits - 2012 and 2013. The 2013 Toolkit has more in it.

Great Bike Skel3tor1 :) Cool Features too :) The Saddlebags remind me of my new bike's saddlebags. :) You can see the bike I now have on my channel. :) It is the 2014 Honda CTX 1300 Deluxe.

what helmet do you have

is the bike automatic or standard

Great bike. Ride safe.

We call it the froot in the UK as we call the trunk the boot.

can a full helmet fit in the side bags?

@Skel3tor1

4 жыл бұрын

My full face HJC helmet does not fit. I can't speak for all full faces, but it wasn't even close to being able to fit so I'd wager that most full face helmets would not fit.

I really want to try out the nc700x, but being only 5'4" it's just a tad bit too tall for me.

@Oyashirochama13

9 жыл бұрын

There's plenty of lowering kits and A CBR600 F4i shock with stock dog bones will lower it about 1/2 an inch or more and than just move the from forks down the same relative amount to fix the geometry and i could try it with a 29 inch inseam.

Does the frunk fit a XL helmet?

@keithbeef

8 жыл бұрын

+Rod Savoyivok I doubt it, I have a Shoei RF1000 Large and its too big to fit.

Just to let you know, I have the same bike as you got and the toolkit comes with a lot more tools in it. I guess your doctor just kept them for himself!

@Skel3tor1

9 жыл бұрын

Wow! Thanks for letting me know. What all does your have in it?

@Pedroelgroing

9 жыл бұрын

Skel3tor1 can't remember exactly but at least 10 different tools!

@Skel3tor1

9 жыл бұрын

Pedroelgroing Updated my video and added your comment around the 3:14-3:45 mark to reflect your comment about the kit coming with more tools! Appreciate the feedback. :D

@Pedroelgroing

9 жыл бұрын

Skel3tor1 Nice! ;)

the unknown tool is used to remove the fuses

@Skel3tor1

9 жыл бұрын

Thanks for letting me know. :)

Makin out like a bandit !

I am 5'10" and can just barely flat foot when wearing my boots with thick soles, with other shoes I cannot flat foot, but that is OK; FLAT FOOTING IS NOT NECESSARY! Just lean the bike a little to the left when stopping, put down your left foot, and that is all you need. You can keep your right foot on the brake if you want. So many people seem to make a big deal out of flat footing when it is not necessary. Maybe they are beginners who don't know any better.

Congrats... Cool bike... Own the 2012 (love it)... Join the forums. :-). Lots to learn :-))))

yay honda for your tool kit? you just said you brought the bike from someone. lol he probably took the tools mate. i had more than just a screwdriver in my original tool kit

How tall r u? Can a 5ft3in guy ride this bike?

@Skel3tor1

8 жыл бұрын

I'm 5'7 and can't flat foot with both feet. you'd have a terrible time. :(

@therealb888

8 жыл бұрын

+Skel3tor1 😢😢 I really loved this bike. The nc 750x is even taller itseems. WTF honda, don't u like short people😠😡

@Rageissues

8 жыл бұрын

+mbrij 96 haha you're a manlet.

@YesitisDex

7 жыл бұрын

+Skel3tor1 me too! I'm short :/ is it bad to get that for a first bike?

are you 150 cm

someone stole your tols from tool kit - there is more tols here in factory spec

is it automatic?

@Skel3tor1

9 жыл бұрын

There are some NC700X models that use the DCT, but mine is not automatic. My personal feelings on the matter is if you want automatic, get a scooter. I enjoy shifting up and down through the gears. :)

@Ksun_C63s

9 жыл бұрын

ok thx and I'm only 16 so I'm just getting started on riding and is shifting hard to learn? Skel3tor1

@Skel3tor1

9 жыл бұрын

kelvin sun Awesome being 16! That was a fun time. Shifting at first will be something you actually have to think about when you do it. After a little while, it'll be second nature. You'll just have to practice. Shifting on a motorcycle is done with the left hand and left foot. The left hand pulls the clutch in, which removes power to the rear wheel, and then your left foot is used to shift up or down. Most bikes will have either 5 or 6 gears and the gear pattern looks like 1-N-2-3-4-5 for instance. Neutral is generally harder to get into than 2nd, which is on purpose because you don't want to go into neutral when shifting from 1st to 2nd. After your left foot changes the gear, then with the left hand you let the clutch out. So, it's just something that requires a little practice. If you ever drive a stick in a car, it's the same deal, except left foot will utilize the clutch on the floor (to the left of the brake), and the right hand shifts the gear using the gear shifter. Case in point, learning how to shift will help with both four wheeled vehicles as well as motorcycles. :)

@Ksun_C63s

9 жыл бұрын

ok thx for the response and last question, do i need to get my drivers permit before i ca get my motorcycle license? Skel3tor1

@Skel3tor1

9 жыл бұрын

kelvin sun I'm not sure what state you live in so you'll have to do some research. If you Google up the name of your state and Department of Motor Vehicles (DMV) or Driver Services or Licensing services, you should get something to pull up for you to start searching. I can tell that you with Georgia, I was able to legally ride my motorcycle (Class M License) before I had a Class C license (trucks/cars) at 16. Georgia requires teenage drivers with a learner's permit to get 40 hours of practice and hold their permit for a year and a day before they can get their Class C license. My dad figured out this loophole that I would be able to ride a motorcycle and bypass the year and a day requirement so I was able to start a job quicker. Unfortunately, we moved down to Georgia right before my sophomore year so I was behind my peers with obtaining a learner's permit for cars/trucks.

Jeez,have U really nevr heard of a windsock? The crosswind has made this,what wud otherwise have been one good video into an incredible annoyance,struggling to listen to the author.

@Skel3tor1

9 жыл бұрын

beaggyboy I appreciate your feedback. While I can't go back and solve the problem with the wind I'll look into a windsock as I didn't know about that, nor did I anticipate it being so windy during the recording. :). I can however add some annotations to the video where the wind makes it difficult to understand what I'm saying.

Bloody windy

you paid too much

Man you stole that great bike

@Skel3tor1

10 жыл бұрын

I know! The average retail is like $6,800 USD. To get it for $6,200 and with all those accessories, I got a really great deal!

i totally thought this guy was gay until he put his girlfriend in the video. who knew!!!

@Skel3tor1

9 жыл бұрын

16504 All about the ladies. :)

@raymundomurillo7536

8 жыл бұрын

I have a 2xl helmet it fits perfect