Love the music intro! And such great editing skills.

Excellent as always, Clay. The black wash really adds to the depth and realism of the engine. Thanks!

Always loved your builds in the magazines. Your attention to detail is unreal!! Glad to see your work on KZread. I will probably watch every vid you do. Keep up the great work!!

VERY Cool Clay! Can’t wait for each one. Thanks for sharing!

Thanks I appreciate all the info & hard work you put into your builds!

That engine build is super clean! Not to mention the decal placement as well.

Excellent job again sir,keep them coming

Absolutely amazing work Clay. Found a lot of answers to questions I’ve had for a while but never got them from other guys concerning 2k clear. Not missed a video yet.

Awesome stuff.... thanks for sharing.... build on 👍

Your work is AMAZING! I am building this car but after it's smashed the wall and with the nose tore off! ANYONE BUT LOGANO!

A great series of informative videos Clay, really enjoying them and learning a lot. Looking forward to seeing episode 4 and further projects. 🙏🏻👏🏻👏🏻🤗

@ClayKemp

3 жыл бұрын

Thanks Martin....Part #4 should be up soon!

Excellent!!

Nice detailing looks great.

Great work on the engine!!

Nice job

Nice job ....

This is my favorite build . I watch it over and over . I was just curious why you applied clear coat first then applied the rest of the decals?

Nice progress!!! I'll be watching

@ClayKemp

3 жыл бұрын

Thanks Mike.

Awesome

Looking good can't wait to see it at a contest

@ClayKemp

3 жыл бұрын

I hope we get to actually go to some this year.

Nice video bro ! I’m so glad you did a video on 2k clear my inbox stays full on guys wanting me to tell them how to spray it lol 😝 i hate doing videos have a good one buddy

that panel accent bottle has been through war

@ClayKemp

2 жыл бұрын

I think I spilled it the second day I had it. :)

Really diggin this build Clay! Just found your channel, Subbed/liked.

@ClayKemp

3 жыл бұрын

Awesome, thank you!

Yo dawg that's tight

Excellent video. I see your idea of mist coat is different than mine. I just did my first sanding after clear and burned through in one spot. I did not get enough clear on . Thanks for the vid.

@ClayKemp

3 жыл бұрын

I probably put too much on. But like you said, burning through is a big problem if there isn't enough on there. I'd rather be safe and know I have enough on there to polish.

I watch your videos every once in a while, to keep me motivated to building something great. But I gotta ask you, what’s the soundtrack? I like it, and for some reason it resonates in my head while I’m working on my models

@ClayKemp

Жыл бұрын

All the music I use is from Epidemic Sound. I just pick stuff that seems kinda laid back, and upbeat. So it is enjoyable, but not too distracting.

I'd like to see someone put plug wires on one of these kits. These EFI engines are a entire different animal than im use to

I always enjoyed reading your articles, but it’s cool to be able to watch you work. Nice job. Do you only out down the two coats of clear, one thin, one thick?

@ClayKemp

3 жыл бұрын

Thanks....it depends how things are spraying usually. If the clear is going down nice, I usually do two coats. But sometimes I will go back and thin the clear a little bit and shoot a third coat just to get it to lay down.

Nice video -- A couple questions. When you are applying the roof number decal, it looks like you brushed on Micro Set (full strength ??) on the roof then laid the decal down. After that, I can't tell if you are using the paint brush with more Micro Set applied over the top of the decal ? Or just water on the paint brush as you smooth the wrinkles ?? Thanks !

@ClayKemp

3 жыл бұрын

I always put down a layer of the blue bottle first to help prevent silvering. All that liquid you see is Micro Set. I only use water if I have softened it too much and need to slow down the softening and smooth out some wrinkles.

Awesome as I expected.! Couple questions: how long do you wait after clear to polish? Was the 5000 grit wet?

@ClayKemp

3 жыл бұрын

I wait 24 hours....at least. Ideally about a day and half seems to be the best time for me. But I get impatient. :) And yes, the 5000 pad was wet as well. Thanks for watching.

Thanks Clay. Really enjoying this series. Gotta ask about that two part urethane gloss cote though. I have seen all these cautions about this stuff being super toxic, need respirators and full suits. Understand that may be the case for painting 1:1 cars. But I see you holding parts without gloves and spraying your hands with this. Are you comfortable with this ? Keep up the great work.

@ClayKemp

3 жыл бұрын

You're absolutely right....I need to be better about wearing gloves. I do wear a respirator and have plenty of ventilation when spraying it.Thanks for watching.

Awesome job! Quick question, how come you clear the body before applying all of the decals?

@ClayKemp

3 жыл бұрын

On this one I wanted to clear over the red graphics so that part of the paint scheme would be consistent. Normally I clear over the paint, and decal over that. I don't clear over decals very often.

Clay, on your process of polishing. Every time I have polished before decaling I have a bad reaction with the polish ad setting solutions. Are you washing the body before decals?

@ClayKemp

3 жыл бұрын

For sure....I usually use like Dawn dish soap, or a hand soap without any lotions in it. I give the body a good scrub with warm soapy water on an old toothbrush. Dry it off, then start decals.

Clay, did you get the no.1,2,3 polishing compounds from the USA branch of Gravity, or from Spain? I've heard of issues with the USA branch.

@ClayKemp

3 жыл бұрын

This set is from Gravity USA .

I'm really enjoying this series. Question tho... Why don't you do all the decals before clearing a polishing the body?

@ClayKemp

3 жыл бұрын

I only wanted the red and yellow cleared. Not all the graphics. Clearing over the red shapes up front gave it a more consistent finish.

Sorry for the dumb question but what was the air pressure you sprayed the clear at. Oh yeah love your work sir and thanks for putting up this channel as well.

@ClayKemp

3 жыл бұрын

I think I'm usually around 20-25 PSI. I go by feel more than anything.

@willietaylor6327

3 жыл бұрын

@@ClayKemp Thank you. This will help alot actually

Hi Clay, just wondering what your brand of air brush is? Thanks for sharing your build videos with us. I belong to the Scale Model Car Club here in Indy. Thanks for your time.

@ClayKemp

3 жыл бұрын

Hi Mike....this airbrush is a cheap one I got off of ebay. Something like $40? Called a Master I think. TCP Global sells them. So far no complaints other than the seals don't always hold and like to bulge out.

@mikepulliam8314

3 жыл бұрын

@@ClayKemp ok, thank you for your response.

What decal set did you use for the engine?

@ClayKemp

3 жыл бұрын

Those are from a little Powerslide goody sheet.

@bigdave0311

3 жыл бұрын

Thanks found it

What is the name of the 2 part polishing you used ?

@ClayKemp

2 жыл бұрын

The clear coat brand, or the polishing compounds?

@raymondchapman5990

2 жыл бұрын

@@ClayKemp polishing compound