Thanks everyone for following along through this series! I appreciate the support. CK

@jerrymiller4522

3 жыл бұрын

Clay where do you get the shark fin from. Part number dealer or distributor

There's nothing quite as relaxing as a cup of coffee and watching one of your videos in the morning. 🤙🏼

@ClayKemp

3 жыл бұрын

Thanks for watching. :)

Absolutely incredible work

What could the person that gave this video a thumbs down not like about this video and build? Clay, you're extremely talented. Thanks for all the video's you make so that the rest of us may learn from you.

@ClayKemp

3 жыл бұрын

Thanks Doc....

This car is a beaut clay! Slicker than the real deal!🤙🏻

Just WOW!!! I've watched this entire series and have learned so much from you. All I can say is thank you Clay.

@ClayKemp

6 ай бұрын

Glad you enjoyed it

Absolutely AWESOME my friend! Love it! Keep 'em coming!

@ClayKemp

3 жыл бұрын

Thank ya buddy. ;)

@tonyd9541

3 жыл бұрын

You two are both masters at model building. I really enjoy watching and learning how the pro's do it! However, makes me want to go smash every model I've ever built😝

Why do you make it all look so easy, it’s not fair on us mere mortals. Great job mate, I enjoyed watching along.

Nice job.... some real craftsmanship ...

Your race cars are always incredible. Wish I could get a hang of it all. Such a difficult hobby sometimes

Clay, I just order more scale auto back issues I didn't have with some of your articles. You are such an inspiration. I really appreciate all your hard work. It makes want to strive to do better with my builds.

Unbelievable. You sir are a master at your craft.

That's effing excellent!! Well done!

Beautiful Clay, Just beautiful.

Another GREAT build and video Clay!!! 👍

Great series of videos Clay, throughly enjoyed your build and learnt a lot in the process. Deserves repeat viewings 10 out of 10 👍🏻

@ClayKemp

3 жыл бұрын

Glad you enjoyed it

Excellent work.

Wow Clay this is an awesome build. Love the decal work on it. Ron

@tonyd9541

3 жыл бұрын

I agree Ron. How do you know when or how to stop applying the decal solutions? I notice how he messages them with a paint brush, however at what point do you stop before demolishing the decal?

Spectacular Clay!

Beautiful job.

My mind is blown. Wow.

You kept me captivated.. super cool.

Makes me want to pull every NASCAR I ever did off the shelf and start all over again - Amazing work.

Amazing "Everything" Clay, Thanks So Much For Sharing n God Bless.

A fantastic and inspiring build Clay. The detail is just awesome. Thanks for sharing.

Superb result.

Great work Clay. Outstanding series. Very enjoyable and educational. You've really taken me to school. Thanks so much for sharing your incredible work. Carry on Sir!

This is amazing just amazing Joey logano is my favorite driver so it’s pretty cool seeing this

Nice job bro ! Maybe I’ll get mine done now lol

Looks amazing. Thanks for all the detailed information.

Steady hands!! And such clean builds! I'm both inspired and intimidated! I'm old , shaking and can't see ! Your technique is crazy but so effective in finished product! Kudos my guy! Someone has to be the best !

Excellent. Thank you so much for sharing this. You are a true craftsman.

Looking SOLID Clay. Thanks for the walk through on this build :D

Fantastic job Clay... beautiful work, enjoyed watching! Look forward to seeing more.😁👍

That turned out amazing. Great job 👏

Amazing work! ❤

I was waiting for this final one... thank you for you lessons!! Please, dont take too long to the next project!

Clay, thats one sharp looking build buddy!

Awesome build

Nicely done

Amazing build. Museum quality. Always loved you work from the pages of Scale Auto.

Beautiful build!

Well now you make me want to build a NASCAR. I haven't built one in many years. I have an old Richard Petty car I might build as my next project. Thank you for the build videos! I think that I will buy the Master air brush. I have never used a dual action. Always have used my Pasche single action. I think I would benefit from the spray pattern of that kind of airbrush. Great looking model and once again, thank you for your time. Always looked for your videos first thing in the morning.

@ClayKemp

3 жыл бұрын

I think you will like using a dual action airbrush Mike. It gives you so many more options on how to paint things. They really are a nice tool to have.

Awesome model great video 👍 nice work

That's awesome

Very cool build! I really enjoyed the how to’s along the way and the explanation behind what you are doing to achieve success

Clay, I'm glad to see you on YT. I have a couple of the books the Scale Auto Magazine sold of your old articles and learned a lot but it is so much better seeing you on video. The video quality is great. I found DT's channel a while ago and his is great as well. You two are my favorite modelers. But I like that you don't talk on yours because everything moves faster.. it's perfect the way you edited the videos. Looking forward to more! I've learned so much from all the videos. I stayed up half the night last night watching them after I found your channel.

@ClayKemp

3 жыл бұрын

Thanks for the kind words....glad you like the videos!

wow did a great job

Great job Clay. I have been following along and adding to my skills. You decal application method has helped me considerably. Thank you.

@ClayKemp

3 жыл бұрын

Great to hear!

Better up my game

Nice work. Keep it up.👍

Well worth the wait for part #5. Thanks for sharing and expiring me to build better models ( even if I only build Sprintcars 🤣) 👍🏻🇦🇺

wow awesome build Clay . just found and subscribed to your channel. thanks for posting this and your other videos!

@ClayKemp

3 жыл бұрын

Thanks for the sub!

Pretty much box stock with a few added goodies and clean assembly. Well done Sir Kemp. Perhaps you'll do one of your famous super detail builds at some point? I know that will take many segments. At some point I'm going to start doing detailed builds here of drag cars, but the camera situation will need to be improved. And I'm moving soon. But I will have my own hobby room so that is exciting. Always fun to watch brother.

@ClayKemp

3 жыл бұрын

Get to work Robert.... ;)

@NitroModelsAndComics

3 жыл бұрын

@@ClayKemp Very soon Sir, very soon.

Great job as usual Clay!!! The one think I picked up you don't scrape paint away to glue parts, I still have been doing that for all these years.

@ClayKemp

3 жыл бұрын

I still do occasionally. Zapagap works so well though a lot of times it isn't needed.

Ha, I just happened across your channel, and just noticed the Washington township Avon pencil, I live out past Danville. Awesome job on your models! 👍🏻

@ClayKemp

2 жыл бұрын

Thanks Eric....I am in Avon....I believe that pencil came from trick or treating a long time ago at the Washington Township park. :)

I've just found your site. I've watched a couple of parts of build. Great build 👍thanks for showing, you've got a new sub. 😃Best wishes from jolly old England. 🤓Pete 😎

@ClayKemp

3 жыл бұрын

Awesome, thank you!

Clay Another awesome build. What's next??? Can't wait...

@ClayKemp

3 жыл бұрын

Thanks...haven't figured that out yet. I've got a few ideas.

Been super helpful as I finally work through my 2018 Southern 500 winner build. One question: Is there a specific size for the PE nuts you use around the guitar string on antenna or just any 1/24 1/25 will do?

Really glad to find your channel, is there a chance you can do a video on that Billy Meyer firebird?

Not a Logano fan but this build is Awesome!

Can u put a link where u got all the parts, stickers,, car body and utensils from pls. And paint. Thx also amazing video!!!!!!!

Looks great Clay! I will use your method of making the front splitter in the future. I also appreciate how to tuck the tires in, I've struggled with that on my builds. Would you mind telling us how you filmed this? Where is the camera, it's such a good angle but it looks like it would be right where your head is haha.

@ClayKemp

3 жыл бұрын

LOL it is....it is totally right in the way! I have had to learn to work around it. Sometimes I move it around for different perspectives. But usually it is right in front of me.

Awesome Clay!!! Also, who are the two jerks that gave this a thumbs down?

@ClayKemp

3 жыл бұрын

I'm guessing not Logano fans. :)

Can you tell me the size of the braided lines and pluming that you use on the motors and through out on your builds? I have been building models off and on for years but not to the caliber you are and I would like to try my hand at building one extreme, and I have a hard time on sizes of the lines, etc brake lines, oil lines etc. Can you put up some videos of you building a motor or brake lines, what I really would like to see is a NASCAR model build from start to finish. Oh can you tell me where you get a lot of your photo etched parts.

Where did you get the photo etch camera, plus the decals for the fire extinguisher and the fuel lines?

@ClayKemp

2 жыл бұрын

The photo etch came from a Gundam etch sheet off of ebay. The interior decals were on the sheet I used. But you can also find them on goodies sheets at www.mikesdecals.com

Beautiful build ,Clay I always enjoy your work. Question, why do you not clear coat after you put on the sponsor and number decals so it looks more like a wrap? Also, do you clearcoat your decals while they are on the sheet before you cut them out and apply them? Thanks.

@ClayKemp

Жыл бұрын

I typically don't like to clear over decals. Especially high quality ones like these. But I wanted the red graphics to look like they were the same sheen as the yellow. So I just cleared over that part, and decaled the rest over the clear.

Clay, what did you use to put the glass in with? My glue works to quick

@ClayKemp

Жыл бұрын

I like to use Testors window maker glue for windows. It is water based, and dries clear.

Did you clear over ALL the decals when finished....?

Great stuff as always Clay. Really enjoy the vids. WIth gluing the wheels on using your method here, do you have a second to adjust them? It's been a number of years since i used zap and kicker, so i can't remember how quick it sets. Thanks for making these videos and showing us all some techniques

@ClayKemp

3 жыл бұрын

No, it is and instant reaction. If you mess up, just break it free and try again.

@truedeadman

3 жыл бұрын

@@ClayKemp ok thanks.

I hate to ask but, where can I find good references photos? Thank you sir.

Does anyone know what type of glue Clay is using on the painted parts?

@ClayKemp

8 ай бұрын

Green zapagap is my usual go to glue for assembly.

How do i get the kit

How do you keep your windows clean?

@ClayKemp

3 жыл бұрын

I wipe them down with a soft shirt and the liquid Novus #1 polish. It works great for taking finger prints off.

@mikehynes6632

3 жыл бұрын

@@ClayKemp I've learned a ton through this build thanks to you. But I know you left some things for us to guess at ; )

Great build but why no seat belts or plug wires? Just curious.

@ClayKemp

2 жыл бұрын

This project was more/less trying to be box stock, with just a few additional details.

The best video on the subject I've seen thus far. Great work!!! My only concern on your videos is your personal safety spraying without gloves... especially the clear coat which looks like a 2K type. Your absorbing all that stuff through your skin...yikes!

@ClayKemp

3 жыл бұрын

Thanks Paul....I did get some gloves. I'll be better prepared for the next painting session.

Do you sell these? I would definitely buy!

@ClayKemp

3 жыл бұрын

No, I just build as a hobby in my spare time.

Who is this D T person that you mentioned

@ClayKemp

6 ай бұрын

Dave Thibodeau

@heidihobear

6 ай бұрын

Do you have a link to his channel?

Dude...

I see the kind of car that you made was just Joey logano's car Man you did awesome dude keep up the great work My other question is do you do other cars besides Joey Logano @ClayKemp