My Welding Table Build | Tool Cabinet
My welding table build project continues in this third episode where I build a custom tool cabinet. All the work and time was completely worth it for the final result. I had a blast spot welding with a TIG welder, bending sheet metal, and finally putting the table on the ground with some beefy casters.
Big thanks to the supporters of this episode: Go check them out!
Send Cut Send: bit.ly/3ubTY5a
For the beautifully cut sheet metal - Fast!
15% off with promo NBTLS15
FOOTMASTER : amzn.to/3pJxmWO
GDR-80F-BLK Ratcheting Leveling Caster
Drawer Slides:
Mcmaster Carr
www.mcmaster.com/2712A5/
Leave a comment and tell me what you think about this welding fixture table.
Solid models of the drill jig and tabletop are available for purchase. Make a request by email at info@nubtools.com
I receive compensation from Amazon's affiliate program when you make a purchase from the above amazon links at NO additional cost to you.
Follow along on Instagram for daily behind the scenes updates on projects at / nubtools
All Nub Tools destinations: linktr.ee/nubtools
Пікірлер: 102
I think that is not a table for welding, it is a table for performing surgeries. Very good work
@nubtools
7 ай бұрын
Hahahah Thanks!
I have never commented on a KZread video before but I just had to say how impressed I am with the attention to detail and craftsmanship. This is a work of art!
@nubtools
2 жыл бұрын
Wow, Thank you!🙏
utterly gorgeous Edit: I just saw that everything consolidates into everything else!??? OMG. Ridiculous. Too. awesome
@nubtools
5 ай бұрын
Thanks!
I have followed this project to see the tool cabinet and I must say in the words of my Grandpa" That is slicker than Owl S**t, Very nice job. Thanks for letting us travel along.
@nubtools
2 жыл бұрын
Hahahahah Thanks so much for watching and taking the journey.
Nobody in this world has one the same, pretty cool to say when so many obviously want it, hard work and follow through is not universal. Awesome job.
@nubtools
2 жыл бұрын
Thanks homie.
Dude the Drawers turned out Sick AF!!! When that 1st one went in so slick, your reaction was Priceless. That’s exactly how I would have felt also. Just subscribed to your channel yesterday and have been Binge watching your Videos every chance I get.
@nubtools
Жыл бұрын
That was a 100% real reaction too. I was a bit nervous about everything coming together. Thanks so much!
Man of equricy
Perfection !!
Piece of art! (congratulation from France)
@nubtools
6 ай бұрын
Thanks!
This is the best one I’ve seen!!!
@nubtools
8 ай бұрын
Thanks!
Incrdible work!!
@nubtools
2 жыл бұрын
🙏 Thanks for watching!
Absolutely gorgeous!
@nubtools
2 жыл бұрын
Thanks!
Awesome job!! That puts my stuff to shame! Can't wait to see what's next!
@nubtools
2 жыл бұрын
Thanks Russ!
So glad I found your channel! Beautiful work and very inspiring!!
@nubtools
Жыл бұрын
Thanks!!
Great work !!! BIG JOB
@nubtools
Жыл бұрын
Thanks Rod!
Very nice table, great job👍
@nubtools
2 жыл бұрын
Thank you!
Wow, just wow!
@nubtools
2 жыл бұрын
🙏
Amazing work brother!
@nubtools
2 жыл бұрын
Thanks!
Your attention to details is amazing. Keep the good work... Cheers from Puerto Rico
@nubtools
2 жыл бұрын
Thanks!
Это самый шикарный стол, а столешница это произведение искусства!!!
You made a superb job. I was following since the first hole and all you done convincing to subscribe to you channel. Awesome skills. Keep going on.
@nubtools
Жыл бұрын
Thanks Harry!
I want one. Awesome process!
@nubtools
Жыл бұрын
I’ve got a plan for that. Thanks for watching!
Beautiful Craftsmanship!!
@nubtools
2 жыл бұрын
Thanks!
Very professional work. This welding teable is my Dream for home work...fantastic job. The work with this teable is absolut exactly...regards from Germany
@nubtools
Жыл бұрын
Thank you! It is a dream come true for me.
Those hemmed edges were stunning. I saw you hammering and thought it may end up a bit wonky. I was most certainly wrong! Well done 👍🏼
@nubtools
Жыл бұрын
Thank you! I had my doubts too. Thanks for watching!
Wow. You did it! I've found myself mired deep in a project before. You've shown a great deal of focus and attention to detail that resulted in a beautiful finished product. Kudos!
@nubtools
Жыл бұрын
Thank you!
I watched this video series start to finish. Amazing project, and very well done. If you ever begin to sell these, I would buy one.
@nubtools
2 жыл бұрын
Thank you!
Beautiful job! I have to make one after my shop floor is poured but it will be a bit simpler...lol.
@nubtools
8 ай бұрын
Thanks!
Very nice and superb work....I need 50 of them! lol!
@nubtools
Жыл бұрын
Thanks!!
She's a beaut Nub!
@nubtools
4 ай бұрын
Thanks!
WOW 👍👍😎👍👍 Came out absolutely fantastic. So….. what’s next? Please do a follow up with how you filled out the drawers. 😜
@nubtools
2 жыл бұрын
Thanks! Next is tool racks, clamps and table accessories, and drawer organization and maybe one more drawer mounted underneath. Thanks for watching!
That was brilliant, I love how it all came together according to plan especially the drawers, beautiful! My only 2 suggestions (only because I know I would mess myself up eventually): Radius the inside edges of the drawer faces as well to keep it from pinching and cutting a finger. And I personally steer away from drawer handles with "catches" on the ends, inevitably I hook a hip or pant loop. Just my deal, but again that was great work! Subscribed.
@nubtools
Жыл бұрын
Good points, thanks!
Maravilloso.....esa mescla de matriceria y hojalateria....un producto.muy muy fino...!!!!....yo pagaria x comprar una mesa igual a esaa....pero no venden en mi zona
@nubtools
6 ай бұрын
Thanks!
WOW. Those drawers deserve some kaizen foam.
@nubtools
2 жыл бұрын
Yes , yes they do! I’ve got plans for them. Stay tuned. Thanks for watching!
Very cool welding table 😎 👌, your attention to detail is great 👍, hope to see more videos like this, but the whole cnc deal isn't really what we're into, manual milling, drilling and other operations are where it's at! Don't get us wrong, cnc has it's place, water jet, laser and plasma is very cool!
@nubtools
2 жыл бұрын
Thank you! I felt the same way about cnc machines until I got to run them. Now I can’t put that genie back in the bottle.😁 Thanks for watching!
God that’s bad ass! You my friend are a fabrication stud! Love that the table fits under your bench. Great idea. Running-out of wall space in my shop has been a challenge. Which 2D program do you recommend for a newbie to get started with?
@nubtools
9 ай бұрын
Thanks! Fusion 360 Would be a great place to start.
you should be using an impact drive for the screws.
Excellent build. I seen spot welds done by both MIG and TIG tons of times but this was the best result yet. Have you thought about grinding a small notch on the rim of the cup for spot welding? May help hot gasses escape or maybe not a good idea? I seen your settings listed but what diameter electrode and how was it prepared (blunt, pointed etc)? Greatly appreciate any feedback!!!!. Cheers
@nubtools
3 ай бұрын
Thanks? 3/32”, pointed.
@joeg7755
3 ай бұрын
@@nubtools Thank you sir!!
TIL spot welding with tig is a thing
Great Video! Question: how did you, or are you, going to protect the rustable metal? The AL front faces are no problem (unless the steel screws galvanically corrode in the AL), but I gather that you had the sides and drawers made out of sheet steel of some kind, and that will rust over time (unless it was stainless? Cant tell if its stainless). Thanks!
@nubtools
Жыл бұрын
Hey thanks! It’s steel. All steel will be power coated or painted.
Love the table. I am building my own and have a question about the casters, when they are not on the wheel (on the rubber pad) how sturdy are they, is there any wobble? Would be really annoying if after all that work the table jiggled while you were working on it.
@nubtools
2 жыл бұрын
Thanks Tommy, I have not yet lifted all the wheels off the ground yet. So unfortunately I can’t speak to the solidness of it. I will say the rubber is fairly hard but still I don’t expect them to be as rock solid as metal pads. I will try and speak to this when I get to the end of the project. Thanks for watching!
My god dude, who is trying to kill somebody when you are showing off you drawers? My shop is in another town for that same reason. The soul sucker 3000 it will get you every time
Nice video Where did you get table top with all tye holes?
@nubtools
7 ай бұрын
I made it and have a video about it that you can find in my channel. Thanks!
Very interested in your welding table. What cost would it be for plans and dimensions to build this Table , I do not live in the US, i live in Australia. I have seen other welding tables built , i put your design on top cudos to you.
@nubtools
Жыл бұрын
I’m working on that now. Sign up for my newsletter at nubtool.com for updates. Thanks for watching!!
even without the man hours that looks expensive ,, but its sweet.
@nubtools
Жыл бұрын
It is for sure. Thanks Tom
Nice job what’s the price on that tool cabinet approximately for them to make that?
@nubtools
4 ай бұрын
It was about 1k if I remember correctly
Nub, you aren't serious about using this table for actual welding are you? Dang thing is so way too pretty to get dirty. I would put it in a display window at your shop or use it as an office desk. If that was mine I'd build a 2nd one for actual use. Seriously really nice work you've done there.
@nubtools
7 ай бұрын
Thanks! Like a new pair of shoes.
Hi can you tell me just about how much it cost you to have that company laser cut materials for you??
@nubtools
Жыл бұрын
All the material for this project?
@professorlloyd1789
Жыл бұрын
@@nubtools I had the same question regarding the SendCutSend stuff for the cabinet/drawers. I've tried using them for some .250" work, and t was going to be $700 for two small 21x12 shelves with triangle braces. I'm guessing the thinner gauge stuff gets exponentially less expensive, but I'd be curious to know what a "real world" cost was for them to turn your cabinet parts.
@nubtools
Жыл бұрын
Hey Professor Lloyd, the total cost at that time for all the drawer sheetmetal and drawer faces came in just under $1,000 shipped to my door with all the bending too.
@professorlloyd1789
Жыл бұрын
@@nubtools Thanks for the prompt reply!
What , I'm the first....damn feel like a virgin....good job
@nubtools
2 жыл бұрын
😂💪
Can I have it?
@nubtools
2 жыл бұрын
😂🙏
Most think they need that top with all the hole in it. USELESS waste of money. Look et meh hip & cool.....
@nubtools
Жыл бұрын
🙋♂️