MY OLD JEEP GOT A NEW LOOK! NEW FRONT BUMPER LOOKS SICK!
The moment has come! After two days of working in my new JCR winch Bumper, I was able to install it on the Jeep and man... IT LOOKS SOOO GOOD! As I mention in the video, I ran out of paint and because of that there are certain areas where I was not able to apply a second and third coat of paint. But, I just ordered two more cans of Silverstone Metallic so I can finish the job. Also, I need to do small modifications to the heavy-duty brackets JCR sent me to make them clear my Ironman offroad steering brace. Other than that the Bumper Looks really good!
NOW ITS YOUR TURN TO LET ME KNOW HOW DO YOU LIKE IT!?
DON'T FORGET TO SUBSCRIBE TO THE CHANNEL, DROP A LIKE AND LEAVE YOU COMMENT!
My Headlights:
amzn.to/2NSLpHR
My Shocks, Fox 2.0 Performance Series:
amzn.to/2DsXa3z
Пікірлер: 49
That looks so so so amazing!
That looks fantastic! I have the old JCR front bumper, that is steel front and back with a hitch attachment for my winch.You can’t go wrong with JCR!
Really looks good my friend! I’m still running stock bumper and this bumper is what I need! Keep up the great work! Nice build!
If you haven't already done so, please install mid, rear, and front frame stiffeners on that unibody. Running wheels that size on a stock unibody will significantly shorten the life of your XJ. This is especially important if you ever plan on going off-road or flexing it. Preserve the XJs! -Mark ('98 2-door SE and '00 4-door Limited owner)
@MattWeaver909
Жыл бұрын
what do you recommend
Good looking ride.
Looks great 👍 Hope my 87 MJ looks that good . I’m basing it off of your builds
Looks great man! May I recommend laying down some 2k clear coat on that? You put in a lot of work into it. So might as well clear it and give it a nice gloss finish and help keep that UV light from tearing up that base coat. Turned out better than i expected. Congrats!
@VehicleTribe
5 жыл бұрын
firemedic 2011 thank you man! And yes I’m putting a clear coat on it. 👍🏻
Looks good ! I’m getting a similar bumper and that looks great .
@VehicleTribe
5 жыл бұрын
Caleb Leonard thank you man!
Yea man I used the brackets drilled some holes with grade 8 bolts and it does the job!
Looks amazing man
@VehicleTribe
5 жыл бұрын
TheRussianWookie thanks buddy! 👍🏻
Looks good man can't go wrong with JC Offroad equipment. Definitely need to add some support if you plan on getting a winch. It will pull write off the unibody. If you use it to hard.
Very nice Bro. Looks a lot like the bumper I got from TuffStuff. The headlight housing on my 01'Jeep XJ will not allow those headlights fit.
Looks awesome. What year is your jeep?
Nice
I didn’t think the video was long. Tomorrow I’m going to pick up a new jeep xj, it’s a 2001 silver in color, I’ve seen your XJ and I very much like the stance of yours. If you read the comments what tire size are you using and the rims negative reset are a question. I’m going to be building mine somewhat like yours. Very nice look you did to your XJ.
What lift do you have dope Jeep man I have a stock 92 xj 5 speed sport high output I want mines to look kinda lime yours lol
Hi man! How you doing. I have a question, what is name of the song you play when you show the results? I like it.
How many inches is this lift?
How many inches is your Cherokee lift? I have a Cherokee equal to yours I bought a 4.5-inch rough country suspension not yet installed
@VehicleTribe
5 жыл бұрын
armando figueroa I have the 4.5” Short arm Rough Country Lift with Fox 2.0 shocks 👍🏻
@xxfullmotionxx
5 жыл бұрын
@@VehicleTribe thank you friend are my idol greetings from Jalisco Mexico if you come some day let me know and we go for some tequilas 😁
@VehicleTribe
5 жыл бұрын
@@xxfullmotionxx Thank you, man! Appreciate that!
What is your full lift kit setup because it looks nice. I recently bought a 2000 Jeep Cherokee XJ and I wanted to lift it and your lift looks really cool hope you can reply 👌
@VehicleTribe
5 жыл бұрын
Hey man, thank you! congrats on your recent purchase. I have a 4.5" short arm Rough Country lift kit with some 2.0 Fox Performance Shocks. Hope it helps
@JoseGarcia-rn5vn
5 жыл бұрын
VehicleTribe Thanks man I’m going to do more research on this 👍
please put on matching rear flares asap
@VehicleTribe
5 жыл бұрын
steve schaefer 🤦🏻♂️ I have to man.
I cannot find this thingggg i want it
Anyone got link for this bumper? please!!
Hi, looks super nice, what is the cost for this?
@TheRussianWookie
5 жыл бұрын
Arnol I believe it’s around $700
@VehicleTribe
5 жыл бұрын
I bough it for $700 some time ago. Now they are close to $900. Since JCR increased prices in their products.
You should didn't need to cut the jcr unibody tie-ins, it would have fit fine.
*like
You need those tie in brackets for strength on the uni body...
@VehicleTribe
5 жыл бұрын
Dan Hambrick yeah man, I need to put those ASAP.
@claudemaggard7162
5 жыл бұрын
You will definitely need those brackets if you ever install a winch and need to use it.
Please bro i want the number of that pint color i want to pint my jeep like that colour
@VehicleTribe
5 жыл бұрын
ps5 Silverstone metallic
Didn't use brackets they sent you... And it's not aligned right............... Ahh
@VehicleTribe
4 жыл бұрын
brutus !! Well the whole purpose of the video was just to show how the Jeep would look with the new bumper/color combo. Not to give a full in depth review. Of course there were things to improve and fix but overall I think it turned out vey well at that time.
The bumper looks great! I just replied to your on Instagram @c_stone706. Are you putting a rear bumper on?
@VehicleTribe
5 жыл бұрын
Thank you, man! yes, I saw your message. And the rear bumper has to wait for a little.
@chasestone5950
5 жыл бұрын
VehicleTribe can’t wait to see what else you do to your Jeep man!!