Excellent work and video

@GeorgeHampl

3 жыл бұрын

Thank you

Great content. Your channel needs more virws. More videos as well, but you definitely deserve more views.

@GeorgeHampl

3 жыл бұрын

Thank you. I am working on it!

Also how does the shifter sit as I noticed the j160 usually is on a angle in a altezza

Hey bro is there a full parts list? I just picked up a j160, looking to swap er

could you tell me did you have to vut the tunnel for the shifter in the end

Hey mate looking into doing the same thing with a gx100 witch come factory with the 1gfe beams do you know if the j160 out of a altezza would bolt strait to that and what crossmember ect? Just can’t find anything on forms though you might have some sort of a idea

@NiceManley

Жыл бұрын

1gfe came stock with j160 at least in europe so you should be sound

what bodykit is that?

do you know if the r154 works on the 1jz ge engine, like do the bolt pattern match from the bell housing to the engine of a grande, i have the same exact car and im planning on manual swap, engine swap and a bunch of other upgrades, thank you

@GeorgeHampl

2 жыл бұрын

Yes it does. The block is basically the same

Do you think this would work on my Tourer V? And if so do you think you could leave a parts list in the description so I know what to buy?

@GeorgeHampl

11 ай бұрын

You will need custome prop

did you upgrade the differential or used to the same diff which came with the automatic transmission

@GeorgeHampl

2 жыл бұрын

Lexus IS300 LSD

Is the handbrake from an is200 or a gs300? I can't seem to find a gs300 one

@GeorgeHampl

3 жыл бұрын

MK3 supra

Do you know if this Cresta model come in manual from the factory? Thanks

@GeorgeHampl

11 ай бұрын

I believe not

Im planning on getting a cheap jzx100 how much would this cost me on the cheap?

@GeorgeHampl

3 жыл бұрын

Similar to the IS300 just some extra cost for custom prop, pedals are generally more expensive.

Where did you get the conversion kit? Did you have to cut the is200 gearbox or did it just bolt on?

@GeorgeHampl

3 жыл бұрын

I bought the conversion kit from MCL autoworx. The design been sold to Crest Motorsport who now sells it. You just have to split the gearbox and put the modified bell housing on. If you look at my previous videos there is detailed guide.

@tommyriordan870

3 жыл бұрын

@@GeorgeHampl il have a look thanks

How much did the full auto to manual swap cost start to finish? great vid btw

@GeorgeHampl

3 жыл бұрын

Thank you. Gearbox £100, Conversion kit £350, Propshaft including modifications £150, Clutch pedal and hydraulics £150. Clutch and flywheel £300. plus some little bits like fluids etc. I think that's it really. Just About £1100 I think

@IMOBSSD

3 жыл бұрын

@@GeorgeHampl WOW! That's cheap. Where'd you get your parts?

@UNLUGY

3 жыл бұрын

@@GeorgeHampl hey mate i plan on going to manual as well, whered u get the parts

@ottoniocampbell9643

Жыл бұрын

@@GeorgeHampl hey bro u have a phone number are a email that I can reach I need some advice

Did you use a wiring schematic to figure out which wires to connect for the neutral switch? Did you just tie the rest of the wires up and out of the way after that? I’ll be tackling a manual swap at the end of the year

@GeorgeHampl

3 жыл бұрын

No diagram. The two neutral switch wires that need connecting are the only two that have bigger connectors within the neutral switch plug. Hope that makes sense. This applies to all rwd Toyotas of the same era. Rest I just tucked away as you said.

did you splice in the speedo wires? if so, which ones?

@cole_butter

3 жыл бұрын

also, what about the reverse lights?

@asbxmx5

2 ай бұрын

Did anyone get answers to this?

Did you use a is200 clutch pedal? Thanks

@GeorgeHampl

Жыл бұрын

No. Jzx100

Is the master cylinder and pedal from is200 also?

@GeorgeHampl

3 жыл бұрын

No, JZX100

@DanRC51

3 жыл бұрын

@@GeorgeHampl cool going do the same sway as that myself and was wondering if I needed to grab them from the is200 .. il look around for some jzx stuff.. Good videos man keep up the good work

@GeorgeHampl

3 жыл бұрын

@@DanRC51 Thank you very much. Any questions DM on Instagram

I dont think you explained which fly wheel you used with the j160 clutch????

@GeorgeHampl

3 жыл бұрын

Sorry mate. With this conversion kit its W58 clutch and flywheel.

@divin3kag3242

3 жыл бұрын

@@GeorgeHampl thanks for the info and keep the vids coming 👍🏾👍🏾👍🏾

@GeorgeHampl

3 жыл бұрын

Thank you. I sure will

@GeorgeHampl

3 жыл бұрын

Also there are more detailed previous videos covering this conversion.

Does the speedometer work after the swap?

@GeorgeHampl

4 ай бұрын

Yes

Hey bro can a jzx100 clutch pedal assey fit jzx110

@bodhila-terre8382

Жыл бұрын

I’ve been looking for this answer for awhile but can’t find any info, anybody know ?

@GeorgeHampl

11 ай бұрын

No

Next Tourer V interior bits conversion plz

@GeorgeHampl

3 жыл бұрын

Absolutely. Hard to come by though

@neirob1

3 жыл бұрын

@@GeorgeHampl S1 are easy to come by but S2 bits are rare. Rarest of em all is the 047 aka exciting package

@GeorgeHampl

3 жыл бұрын

@@neirob1 Ive never heard of 047. Got any more info?

Apparently the w58 flywheel actually won't work with this, so how did you manage to make it work?

@GeorgeHampl

2 жыл бұрын

Hello mate. You have wrong information. The JZ W58 works. What are you trying to do? And who told you that?

@sillycargarage3262

2 жыл бұрын

@@GeorgeHampl thanks for replying so soon! So I've got a friend who 1jzgte vvti converted his gx90, brilliant build and he uses a j160 but he said a modified 3sge flywheel can work if the holes were brought out 4mm which is exactly what he did, but he said he tried a w58 flywheel and it didn't work :/

@sillycargarage3262

2 жыл бұрын

Im in the research phase of manual converting my jzx100 with a circlip upgraded j160 😁

@GeorgeHampl

2 жыл бұрын

@@sillycargarage3262 I am not familiar with the 3s flywheel but I know people use it. I am guessing it all depends on what J160 conversion kit is used. This kit is designed to be used with the JZ W58 fly and clutch kit. There are two W58 flywheels. One for the JZ and other for the 7M engine and they are different.

@sillycargarage3262

2 жыл бұрын

@@GeorgeHampl are you using a factory size 235mm flywheel or the aftermarket 10 inch/250mm version? That may be where the fitment issue lies potentially. Factory size may work but aftermarket may not

Got a question I have purchased the new kit with the trans bell housing and shaft adapter Any info on how the direction of the install goes with the Bering and fork

@GeorgeHampl

2 жыл бұрын

Hey dude. Not sure what you are asking to be perfectly honest.

@skyvision6766

2 жыл бұрын

@@GeorgeHampl sorry my terms may not have been correct, the orientation of the input shaft adapter sleeve and bering