I just bought an Ender 3 V2 and It should come next week. I've watched a LOT of 3D printing channels. Yours is my favorite. Your personality really shines and I will be watching a ton of your videos. You seem like such a happy, upbeat, great guy. Thanks for your help! I can't wait to learn 'a million stuff' from you! :)

super upgrades Bryan! thanks for all the links and great info, I think you covered it all, except the cover, clearly, or the clear cover

@BV3D

2 жыл бұрын

Haha! You're welcome. I guess I'll need to provide coverage of that PSU cover! 😄

Lots of good upgrades, thanks for all of the shout outs to the designers

@BV3D

2 жыл бұрын

Thank you! I don't always remember to do it, but I do try! 👍

love the tried it at home t-shirt great video. neating up your ender 3 is always a nice to have. i needed some of these to finish mine. the video is also great for 1st time ender 3 owners.

Your videos are to the point, clear, and relatable. I'm a professional technical trainer for an automotive software company, I use some of your videos not just for learning about 3D Printing, but also as a reference so our production videos/training remains simple, relatable, and transparent. I'm proud of your content, I hope you are too.

Liked seeing those upgrades, including the blue racing stripes! I had to put them on my 3V2. Thought for a second the lazy-suzy would be wood PLA too, but hope sprang eternal ;) Again, great job and +20 pts for mentioning the names of the designers for the upgrades...classy and great character shown.

Pleasure to watch as always, great links and info. inspired to revive the look of my chop shop work horse

Would love to see a video on your modifications to the PSU. Recently got into 3d printing and have already modified my PSU to run lights and a Raspberry Pi.

@MikeLearned

Жыл бұрын

This!

Great video, love seeing interesting mods! Did you ever make that video on the PSU cover? I couldn't find it and I would love to see it!

I much prefer the prusa type knobs, with the flags so you can just run your finger around it to scroll up and down quickly

I like the lazy susan, that's a good idea!

Great video! Thanks!

I would love to see a video on the PSU cover

Great shirt Bryan if it interests me and you say don’t try this at home too bad I’m 49 I’m trying it. Great video as always

Probably watched this dam video 6 times...Thank you! Great comprehensive stuff ^_^ lol

I would like to see functional upgrades to the Aquila. There are so many videos for the Ender 3 functional upgrades that it is hard to choose the cheaper competitor just because once you get it you don’t have as much info on the upgrades.

First of all I would like to say BIG THANK YOU for making these videos. Where did you get the part on the left hand side of your machine the part with the gear knob ? Also fitting instructions if possible. Please stay safe Bill M8-) Scotland

"I might cover that cover in another video" haha, great line there, keep up the great work Brian 😆

@BV3D

2 жыл бұрын

Thanks! Will do! 👍

@xvolvo332

Жыл бұрын

have that video been done? cant find it anywhere

I've seen you using Printed Solid Jessie PLA in some of your recent videos. What is your impression of it? For me it is quickly becoming my go to filament of choice, due in no small part to the 2kg i get every month in my Jessie box. That said, I have found it to be reliable and easy to print and I am generally very happy with the finished product.

Where would I find info on the power supply part with the switches? Awesome presentation by the way. All needed info and no BS. Also like you give credit to others and not claim it for yourself. I'm liking the channel the more I watch.

Thank you for the video, it was very helpful. I have another problem I would like to hear your input on. My Voxelab Aquila printer sometimes will start a job and will arbitrarily decide without any outside interference that the print job has completed. It stops wherever it is moves the nozzle to the back left side of the plate and on the screen says the job has completed. After clearing what was just printed off the build plate I can start the job again immediately and it will print flawlessly. Any thoughts on why this happens? Thank you again for your input I do rely heavily on your knowledge.

Could you do this for the V2? If there are any unique? I already am gonna use the filament spool adapter for my V2! I hate it being on the gantry... Hate the idea of 1KG of weight hanging over the bed lol.

@BV3D

2 жыл бұрын

Hi! The LCD knob, V-slot covers, and filament spool adapter will work just fine on the V2. I'm not 100% certain about that particular bed handle, but I'll give it a try in a couple of days. The display cover and drawers aren't needed for the V2. Oh, on the V-slot covers, if you end up with one or two that are a little too long, you can trim them with the flush cutters that came with the printer. 👍

You mentioned the extruder knob as an upgrade... did you also print the aqua levers below it? I am not a fan of the design and have seen people with printed ones to fix the design to make feeding the filament easier, however, I am not able to find those files. Great video!!!!!

How is the thing called left of your spool holder. I know what its for and I really want one for my ender 3 v2! Awesome video as always btw.

Hi BB I saw your spool holder upgrade and i could see that it kind of puts the weight on the left hand side of the printer, I was wondering would it not be better to have it some where center mass so that you do not pull things left. The way I see it its like having an old shelby where its only power on one wheel the back left one meaning that when you step on the gas the car moves right and wise versa, now in this case it kind of puts weight on left hand side might put force on the left hand side meaning you might screw up the gantry the pulleys and belt drivers, you might not see it now but give it time and I'm sure you would start to see some tear on one side of things maybe hear a squeak from the bearings because the weight is off balance

`Thx Bryan great videos please make a video about the modifications to the PSU, we use these printers in the classroom and de modifactions makes it safe thx :)

have you did a video yet on your power supply with the 3 switchs if so i cant find it thanks

if you have a press fit drive gear you can file the gear off and use a new one. thats what i did for my ender 3

Nice job as usual Bryan

@BV3D

2 жыл бұрын

Thanks, Mat! Hey, I like your rebranding! 👍

@MATS_MAKERSPACE

2 жыл бұрын

@@BV3D thanks buddy, trying to reinvent myself

My ender 3 pro has that press fit bearing on the extruder could you make a video on how to remove it and replace it with a grub screw bearing Thanks.

I'm hoping we'll see some Ender 3 s1 upgrades coming down the pike, eventually.

are you going to cover that cover ever? i would like to see the reasoning and upgrade for it.

Just printed the dual tray for the ender 3. Unfortunately the bed mounting bolts interfere with the tray case in the y movement.

How do you feed the extruder in the back with that spool holder on the front? Do you use some filament guide?

Love that shirt 😆

Great t-shirt, as always 🤣

@BV3D

2 жыл бұрын

Thanks! 😁

The Ender 3 is certainly the VW Bug of 3D printers... a reference that only older guys will get, as there were innumerable aftermarket upgrades available for the original Bugs.

@BV3D

2 жыл бұрын

Haha. Yeah! I had a 1973 Super Beetle (in the mid-1980s) and a 2001 turbo. I think in the early 1980s you could build an entire VW Beetle with parts from a J.C. Whitney catalog! 😄

@bradmeekakasilvertopflyer

2 жыл бұрын

@@BV3D in my last marriage I had completely redone a 21 window micro bus it was cherry, that sorry ex of mine got it in the divorce.

@heathdumler6129

2 жыл бұрын

I get it. I'm thinking more like it's a Chevy 350, infinitely upgradeable and modifiable.

@SABRE-ls5fu

Жыл бұрын

Or the jeep cherokee of printers!!

Do you add z axis home switch adjustable ?? Plz share stl..

Love the shirt!!!! lol

Your voice is a little bit reminiscent of Casey Kasem! I guess you need a top 100 printable’s video. Lol

Very nice video 🇨🇾👍🏻

Howdy Bryan I have not done any upgrades to mt ender 3's but I think I will start today. Is there any way you could shoot me the link for the upper and lower drag chains the ones I find are not like yours and that's what I want. Also can you please do the video on the PSU cover have been wanting to upgrade to a larger Noctua fan 80 - 120mm so yes would love to see that video. And once again another great video looking forward to more soon.

@BV3D

2 жыл бұрын

I'm sure I've got the drag chain marked as a favorite on Thingiverse. I'll look and see if I can find it. That's been on the printer for about 2 years now! I'm not _super_ happy with it because it's not oriented the way a proper drag chain would be. It doesn't fold over itself like it's supposed to. It's more like having segmented armor for the cable.

@BV3D

2 жыл бұрын

I'm pretty sure it's this set. www.thingiverse.com/thing:2920060

can you put led light on it as well

Greetings I am the silvertopflyer new sub I'm very interested in 3d printing I have some design knowledge and I am wondering what is your opinion on delta printers vs. Fdm printers ....thank you for the excellent content, take care

Thank you.

@BV3D

2 жыл бұрын

You're welcome! 😊

Hi bryan my name is cam and I need some help and advice about my ender 3 do you have a way for me to email you the issues I am facing or some personal advice on how to setup and print using my ender 3

How do you look for the upgrade rookie thank you

You need to cover that cover!

Yes sir

were did you get the rail slot to cover the wire?

@BV3D

2 жыл бұрын

That yellow bit? It was just a section of slot cover left over from a set I had printed for another printer, and I had cut a notch in it at one end for the wire.

I need help. I just found you. I had a back up on filament. I spoke so people on FB and they helped but now that I removed all the back up. It melted a very tiny wire. And now my print will not center

@carriemolenky3217

Жыл бұрын

It would be great if you can get back to me not sure what I need to replace

Can you link me to those cable chains?

@BV3D

2 жыл бұрын

Pretty sure it's this set, but it's been a while since I put them on the printer. www.thingiverse.com/thing:2920060

@heckyes

2 жыл бұрын

@@BV3D TY

Are any of theese backwards compatible by any chance?

@BV3D

2 жыл бұрын

Well, I'm showing them on an Ender-3, not a Pro or a V2. I think the only step backwards from that would be the old Ender-2 (non-Pro)

@shadedreaver

2 жыл бұрын

@@BV3D makes sence, Thanks

@BV3D

2 жыл бұрын

@@shadedreaver Sure thing!

Well hello Bryan!

@BV3D

2 жыл бұрын

Greetings and Felicitations, Tom S.! 😊

I suspect Jpeterson1 is Jordan Peterson making the Ender 3 "Beautiful"

nice haircut

@BV3D

2 жыл бұрын

Bad hair day. Pulled it back into a ponytail. It's still stupidly long. 😀

Am I the only one hearing George Carlin?

@BV3D

2 жыл бұрын

Some people get George Carlin, others get Kasey Kasem. I think Kasey was a little more soft-spoken though. 😉

Sorry, but all these updates are like a massage for the dead. These are useless "beauty enhancements".

@BV3D

2 жыл бұрын

"A massage for the dead." I hadn't heard that one before. 😀 I particularly like the drawers and mounting the spool holder on the front left corner of the printer. Both of those have a lot of value to me. I also find it important to not have an exposed circuit board on the back of the screen. V-slot covers anywhere but on the bottom extrusions to keep the crud from collecting? Yeah, that's 100% printer dress-up. So's the replacement knob. But some people enjoying personalizing their printers. Other people consider them to be purely a tool that needs no adornment. Thanks for sharing your opinion and thanks for watching! 👍

@AlexanderAfeldt

2 жыл бұрын

​@@BV3D I just didn't know how to properly translate the expression we use in such cases. 🤣 I have already changed so many things in my printer that I could just immediately buy an expensive one, only the frame remained from the previous printer. But I'm currently building my version and all these parts will be transferred to it. Good luck! 😆