My Experience Shared With The Aggressive DIY Detail Gold Standard DA Cutting Pad!!
Автокөліктер мен көлік құралдары
In this video, I share my experience with the DIY Detail Gold Standard DA Cutting Pad. The DIY Detail Gold Standard Polishing Systems Wool Cutting Pads are engineered to work in harmony with the DIY Detail Gold Standard Polish. The short nap foamed wool face allows for effective cutting for deeper scratches, and the foam interface keeps the pad in contact with the paint. Finishing with the Gold Standard Waffle pad for a perfect finish on every car.
DIY Detail DA Cutting Pads.......diydetail.com/products/gold-s...
The Gold Standard Wool Cutting Pad effectively removes imperfections, sanding marks, deep swirls, scratches, oxidation, and water spots, leaving a stunning finish. Always work on a cool clean surface in the shade, for the best results.
Available in 3.25”, 5.5”, and 6.5” diameters with center cooling holes in the larger sizes. The DIY Detail Gold Standard Wool Pads can be used with Dual Action, Forced Rotation, and Rotary machines.
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 9462450
#paintcorrection #polishing #autodetailing #detailingsupplies
Пікірлер: 84
What do you prefer for the cutting process....Microfiber, Foam, or Wool?
@ShineYourLightDetailing
Жыл бұрын
Microfiber if possible, other than that, Rupes coarse wool pad or foam if the cutting is light.
@kevincampbell8298
Жыл бұрын
I prefer wool to cut. I love the lake country purple and blue hybrid.
@tylough
Жыл бұрын
Wool if it's gel coat. microfiber for paint.
@havingtoomuchfun4806
Жыл бұрын
Wool, MF creates too much heat
@danlc95
10 ай бұрын
I like to use the Rupes coarse blue wool pads for heavy correction.
Brian, thanks for the review. I had a chat with your shop manager, and we agreed. You will actually get better results and cut with a few little changes to your technique. For best results start with a pad fresh from the pad washer, second only use one spray of polish on the pad( use a decisive string pull on the trigger). Finally for the best cut, as you mentioned, use a 21mm da, speed 3, and little to no pressure.
@havingtoomuchfun4806
Жыл бұрын
It’s nice to see a company commenting to support a content creator, not many take the time.
@J1Z06
10 ай бұрын
Would an 8mm throw be alright? I have a Flex 3401.
@rjanuari1978
8 ай бұрын
@@J1Z06They mention and show in their vídeos that you can even use a cheap sander and you will get decent improvements. Surely it won't cut as much as a proper 21mm DA, but if an 8mm is what you have, just go for it. I hoped it helped.
@J1Z06
8 ай бұрын
Yup, Thanks!
@J1Z06
7 ай бұрын
@@rjanuari1978 Thank You! I should have put two and two together on the sander/8mm throw reference. Brain fart, lol!
I wonder how it would have performed if you used only 1 misted spray as Yvan advertises in their videos
That gold standard polish is no joke!!
I remember when you were a mobile detailer lol. Back in your element Brian.
Been curious about this for a while now. Seen pictures in their fb group, and I wasn't believing what I was seeing. I have to try it now
Looks like a must-have... thanks Brian.
Brian, I’m glad to have found your videos on the DYI Detail products. I enjoy their videos and of course they get results but it’s nice to see your unbiased opinion giving their products high marks. I would love to see you showcase and test more of their product line.
I had already liked this stuff but wasn't sure of it's limitations, let's just say your video crushed my expectations, this stuff is serious!!
DIYDETAIL products are top notch man, got my ceramic coating from them coming in soon… can’t wait to try it!
I’m impressed with the cut and the finish of the polish and the pad. I’m going to order this pad if it is in stock. Thank you for the video.
The Shop Manager was like "It's only Tuesday, get to work Pal" !!
@apexdetail85
Жыл бұрын
😂👍
Awesome vid!! I actually was gonna order some wool pads this week..I'm gonna have to check them out👍🏻🤓
Pretty impressive results right there!
Bri, just a follow up on your B1 and B3. This stuff is everything you claim. I put the B3 on a non coated but heavy coated seal and shine paint. The shine and slickness is amazing. Going to use it tomorrow on my DD that I treated with B1. Also the dilution ratio on the Apex wash is phenomenal. I put 1 ounce in 5 gallons of water. I still had suds in the bucket 2 to 3 hours later.
Excellent video Brian 👊🏼
Great review!
Brian amazing video
Awesome video and product review good friend
I like my LC CCS foam or Urofiber 50/50 pads! I'm not a business so wool or heavy cutting pads lately have gotten pretty expensive for my small fixed budget! However, I was looking at the DIY Detail products!
Super impressive. And you guys already have that Mustang looking fantastic 🍻🍻🍻
Thanks Brian this was a great video ! I will be ordering these a.s.a.p.
Very informative!
600 grit is quite the test. I’ve adopted the Yvan method of cutting with a DA and finishing with a rotary, never going back.
@patb5266
Жыл бұрын
Nice! I have huge respect for Yvan.
Impressive!
Ive gota say...wow!
Dannngggg, and that’s only with the Gold Standard POLISH!!!
@bekiro28
Жыл бұрын
gold standard is no joke if you team it up with this pad. still zero dusting and awesome finish. it's the one of the best polish
Winner nice
I’ve never used a wool pad and only have used foam. Haven’t polished that much though.
Hi Brian, thanks for this video. I could watch your videos all day. What do you prefer? This combo or 3D One and 50/50 pad?
Both pad and polish look like winners
Hi! Question. Why should I go for a short nap wool pad? And when should I not go for a short nap and opt for high nap Instead
Hi Brian. Need some advice. I have a 21 Mazda CX-5, and i am assuming it has pretty soft paint. I've already had to have some warranty paint work done. My question is, I have some pretty deep water spots, and the yellow waffle pad did not do the job. Would you recommend this wool pad or go for the euro fiber fifty fifty pad for the softer paint.
Would you mind taking a look at turtle waxs minute wax? I saw pans video but would be nice if someone went more in depth
@apexdetail85
Жыл бұрын
Will do.
Funny 2 cu doing trailer. Haven't seen u do boats,rv,campers since u started ur channel .lol
@SupremeKid98
Жыл бұрын
Right
@apexdetail85
Жыл бұрын
This belongs to a senior customer of mine that lost mobility to get areas up high. I volunteered to do it for free.
Hope the new rupes microfiber & waffle pads in ur reviews list!
@apexdetail85
Жыл бұрын
Absolutely.
How's this compare to a uro-fiber?
Brian. One thing I forgot to ask when I placed my order. Does BC3 come with a spray nozzle?
@apexdetail85
Жыл бұрын
It does. 👍
It looks like a good wool pad to me! 👍, looks a bit like sonax hybrid wool pads?. A wool pad that impressed me at the moment and the SPTA. There is a kit of three pads, purple extreme cut, beige medium cut, orange cut & finish, and the latter orange/gold is excellent. Cuts and finishes very well like rupes yellow wool pads, but of course much cheaper! . In your opinion Brian, how to recognize a wool pad with nanofoam or polyfoam technology like the lake country foamed wool pad?. The SPTA purple, beige, orange wool pads I have the impression that it is hybrid but not sure?!. Thanks in advance
@danlc95
3 ай бұрын
It's their take on the Optimum Hyper Wool Pad, which I believe Yvan came up with.
Hi Brian, do you feel the need to polish afterwards or can it be used as a one step ?
@bekiro28
Жыл бұрын
depend on your pad choice but it is a solid one step polish
Brian. Have you or would you consider doing a review on Ewocar? Polish/Compound
@apexdetail85
Жыл бұрын
Link?
Jw, why dont you spray the poslish like the DIY team shows on their videos
You don't have too tape off moldings with the gold standard.
I’m convinced that Tesla uses Ford’s paint colors!
How much clear is this taking off out of interest?
@apexdetail85
Жыл бұрын
Just a few microns.
@tripsingh3642
2 ай бұрын
Brian would you say its quite aggressive I'm surprised this compound done the job with p600 grit, personally I have no compound in my range that will do 600 grit, I use sonax alot from your videos plus I ordered some angelwax perfect polish to try @@apexdetail85
I am a little baffled by a product that can cut that good and finish well. Of course all corrections are pad dependant. Can the Gold Standard Polish finish down on soft paint with the best finishing polishes available? That would truly be amazing.
@diydetailofficial
Жыл бұрын
It can, we designed The Gold Standard Polishing System to be a true cutting polish, that’s very pad dependent. We have one more pad on the way, a ultra fine rotary jeweling pad.
@orthodox1717
Жыл бұрын
@@diydetailofficial what about a DA finishing pad?
@havingtoomuchfun4806
Жыл бұрын
@@orthodox1717 the gold waffle pad finishes perfectly on my DA.
@rjanuari1978
8 ай бұрын
@orthodox1717 I believe you can use their ultra fine with a DA. It won't just finish as nicely as if you used a rotary.
I love microfibre
@havingtoomuchfun4806
Жыл бұрын
You will like this wool pad even better.
Microfiber
You used that polish so wrong You put 7x the recommended amount of polish. Use a pad washer and next time apply only 1 spray (not 7)of the polish
Bro you literally have 3 times the product you need and it's a spray onto wet pad. Disappointing considering you say to read and follow directions.
@CarlosMartinez-ws4uu
4 ай бұрын
Hey take it ec (Scarface voice)
1st