My M3 finally is so close to being done Instagram: motorhead.c...
Жүктеу.....
Пікірлер: 156
@adrianvanderlee1117Ай бұрын
Have had no problems finding you what’s in a name anyway enjoy watching you and you family v tune 23 garage you boys are magic
@Mtech_garage
Ай бұрын
I think for people who weren’t subscribed and didn’t put the .co after
@S2NAZАй бұрын
I like your TY channel name, has a catch to it Mark 👍🏻 gosh that little red M is looking sooooo good. You have to be really excited 👊🏻
@Mtech_garage
Ай бұрын
Thank you!
@James.OАй бұрын
You might want to consider making the lower part of your gearbox bracket a T-Section to give it some strength, the two triangles meet in the centre putting all the stress in one point with nothing to stop the lower section flexing. Welding a small lip 90' to the lower brace along its length should stiffen it up nicely. Original part had a box section for strength.
@AbcDef-iq4noАй бұрын
I am not sure if you are aware of this but when viewers like me try to connect to your site using a bookmark from when your site was called Motorhead a message pops and says "This page isn't available" with no mention that your site has been re-named. The only reason why I even knew your channel was still in existence was becuase your newest video showed up on the sidebar as a suuggested video to watch.
@Mtech_garage
Ай бұрын
I’m not sure how to prevent that 😅
@philtucker1224
Ай бұрын
@@Mtech_garageMarc I didn’t have any problem, ( I guess as a subscriber? ) your channel just continued over despite the name change and still shows subscriber numbers and the “subscribed” bell symbol etc so no action was required by me.
@philtucker1224
Ай бұрын
Marc when you are painting small pre-cast parts prior to assembly it doesn’t hurt to just warm them slightly before spray painting and then they will cure and dry that bit quicker between coats. Just saves you half an hour when reassembling. Loving this build 🙏🇬🇧
@jimwiskus8862
Ай бұрын
Just curious when you say bookmark is that in Google or another search engine? I subscribed on KZread a couple years ago. I haven’t missed a one.
@jimwiskus8862
Ай бұрын
Man Mark that E30 is coming along. Looking forward to the next drop. I like Mtech, I also thought of Mtune. Keeping the brothers together.
@TommyAlanRainesАй бұрын
Like the new channel name Mark! Agree about the old name and the band issue, noticed from doing prior searches. Love seeing progress on the M3. Keep Orange Crushing It!
@DukeCannonАй бұрын
It's content like yours is why I watch car rebuild vids. I dont want to be sold anything, and I dont care how you spend your money. Please never change
@MABOSACRАй бұрын
bro, whatever makes you happy I think is fine for us, we appreciate what you do, your effort to get ahead and without clearly leaving aside your growth and professionalism! Greetings from Costa Rica Pura Vida! 🤙🏼
@stephencarter1442Ай бұрын
My morning coffee with MTECH Thanks Mark! love the OG m3 grille nailed it.
@mikeycunningham2307Ай бұрын
Name of channel doesn't mean much to me it's content and steady content is what matters do enjoy watching you and your brothers as well keep up the awesome work
@FlyEaglesFly19111Ай бұрын
Car is coming together. Stay safe and be well. God bless
@garthwebb6418Ай бұрын
The M3 Is so cool. Back in the day I had a 1987 325i when I was stationed in Germany. It was cool but not that cool. Don’t sweat the fuel tank color. No ones going to see it. As for the cleaning products, I’ve got 7 cars mostly older) so I’m ALWAYS dirty. Thanks!
@angelmorales220Ай бұрын
The M3 is looking good.
@josemontoya4369Ай бұрын
Looks legit .. as for the cleaner would use it on everything!!
@adrianowen6524Ай бұрын
Looking nice good work as always mark hope it brings you joy bro I know it's your dream car man and I remember you saying something about it being ready by the time you have your wedding in some episodes now I hope it will be liking it man!.. ✨👑✨👍👍👍✨
@L0000NEYАй бұрын
Car is looking fresh Mark. Also the new Channel name is good. Keep up the great content.
@Mtech_garage
Ай бұрын
Ok thanks!
@numb3rcrunchr90Ай бұрын
Yet again, Mark, awesome content. Slow and steady wins the race! I would paint the tank black. AS for the cleaner, I would use it to clean the engine bay of my classic Z31.
@wookiewookster1214Ай бұрын
Great video Mark thank you!
@serged2559Ай бұрын
Nice work 🙌 can’t wait to see the m3 finished
@alanleclair1Ай бұрын
I like the new name! Keep up the great work. And I love some super clean to detail S2000! 🍻
@DannerPlaceАй бұрын
Excellent work, front end is sick.
@AutomotiveEvangelistАй бұрын
I raced BMWs for almost 20 years. When you said you were going to change out the rear wheel bearings I just smiled because I have the special tool in my garage (racers change them every season), and guessed that you didn't. The car is coming along nicely, take your time and enjoy the process.
@mikemissel7785Ай бұрын
Coming along nicely
@mattmarshall747Ай бұрын
Great video. Love the new name 👌🏻
@andybaker5787Ай бұрын
Keep up the good work Mark.
@Mtech_garage
Ай бұрын
Thanks, will do!
@vladimirjovanovic160Ай бұрын
Nice project, ol best!
@MrHuismeesterАй бұрын
Great new name !! And that Beamer is going to be a super car !!!!!
@hannatwinsАй бұрын
Hi Mark. Long time subscriber here. Love your content and your amazing work ethic! I'm rescuing an '86 Z28 Camaro that has been in my family since new. I could sure put that Super Clean care package to good use on this project! Please pick me! Peace.
@lspaint3863Ай бұрын
Love the name,suits you an the channel,much respect from New Zealand 👊
@trueplayer7169Ай бұрын
I always use the degreaser to clean my engine bay and the wheelwells and also there is side of the Rims
@andrewgtr65Ай бұрын
Great name in my opinion it suits the car project. Keep up the great work and keep the content coming!!
@Kiwi-pp7rgАй бұрын
Hey Mark, nice progress, looks great, Agree with @James.O below and think that there should be more redundancy built into the mounting point to the body i.e. four securing bolts two each side with the equivalent distance between bolts as per your factory mount.
@anathimaliwaАй бұрын
😄 I was wondering wtf is an Mtech and when did I allow notifications to it. Cool name dude.
@Mtech_garage
Ай бұрын
😂😂 thank you
@user-di4kv9yk3gАй бұрын
was in same position as you with the rear suspension which is similar configuration as yours, its quite a handful to push out when you have to balance and operate the press, i not touched it for two months as i am still building my press to push out the bearings, all in between other ongoing jobs, all a bit mad, but i love it
@huggdavidАй бұрын
Love your channel!
@Homemade1970Ай бұрын
That red looks super clean nice mark👍👍
@eganpeteАй бұрын
Congrats Mark on the new channel name. The E30 is looking great. Keep up the great work
@Mtech_garage
Ай бұрын
Thank you
@hmgriffin1981Ай бұрын
Keep up the good work
@TheNorthernmunkyАй бұрын
It’s a great project, if hqv probably shot blasted the components and had them powder coated and achieve a flawless finish. Also my ocd would push me to restore the underside of the car too.
@mattkirarАй бұрын
I would love some free super clean!! I use that stuff on everything that needs cleaning.
@rjauto7215Ай бұрын
Hello Mark my son the name is spot on keep it 💯 anyway how are you fella not seeing that much of yuri or Ben now thay have slowed right down with the videos so glad you are still pushing them out and thay are great to the bmw is looking fantastic by the way so we'll done ✔️
@Mtech_garage
Ай бұрын
Thank you, and they’re doing good 😁👍
@chrispursley2014Ай бұрын
I like the mteck I also like how you show how to fix the vehicles
@user-ot1hn1yb6yАй бұрын
14:44 clear coat it with about three coats or a clear rock chip coating and leave it grey/gray...
@vonage210Ай бұрын
Nice !! Like the name
@jeffphillips3483Ай бұрын
Pretty good welds to me
@rsachdeva9491Ай бұрын
Great video
@jimmyholl9732Ай бұрын
Very nice! And I like the channel name.my little buddy
@PapaVrooomАй бұрын
Great name for a knife too.... :) Can't wait to see that M rip.
@mfc4591Ай бұрын
That colour paint on the diff cover will grow on you, it, in my opinion, looks much better than too shiny silver, thanks for the content
@bobmanzi7712Ай бұрын
Great stuff thanks
@richatkinson989Ай бұрын
This car needs a underside full restoration, u should do this as the next phase 👍
@Mtech_garage
Ай бұрын
Not a bad idea
@leoardon2031Ай бұрын
Sound good the new name
@Must-StangingarageАй бұрын
Cool video, I quit watching a bunch of KZreadrs but I always watch MrGonein60, Flint is a very talented man, but I saw you on his podcast so I'm following you again,
@niddstubeАй бұрын
Hi Mark I think there is another trim between the bumper and metal grille missing.
@Mtech_garage
Ай бұрын
Yea I have it, the bumper is not buttoned up yet 😁
@craigfrancis9578Ай бұрын
Cool name bro🎉
@mortenvindingАй бұрын
This is going to a great car
@zacharyamos3583Ай бұрын
I will use the super clean for my truck
@shinzuel1466Ай бұрын
i know how you feel im just stripping my eclipse rear suspension down to replace all rubber
@SurtidoRico619Ай бұрын
Attaboy Marky! What numbers will M Grande be making? Horsepower and Torque wise? A SuperClean kit would be nice to keep my motorcars in pristine condition. Drive A LOT and am obsessed with keeping my undercarriage components and wheel wells clean
@glen511Ай бұрын
The M3 is looking sharp. You purchased a SECOND one ?
@tonyc9260Ай бұрын
I've been watching you for years mark, it's also a cool name on the channel.. I could definitely use some cleaning products if possible I'd appreciate it
@DOINKS-R-USSАй бұрын
Old school m3😊
@Nicovb1984Ай бұрын
I would love to have super clean products to clean my vehicles and garage.
@garysmith5434Ай бұрын
love the name
@mike430sportАй бұрын
Did you have to purchase E30 M3 doors? Or did you create your own lower panel to match with the fenders and quarters?
@jairoandujarАй бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻nice name
@maxwellndwambi5124Ай бұрын
Good name
@markkennedy4055Ай бұрын
Mtech, I like It! 👍
@francissmith3089Ай бұрын
I do like the name my friend ❤
@adrianvanderlee1117Ай бұрын
We can’t do things like this anymore in Australia they have the slightest bit off damage the are scrapped
@thebird1995Ай бұрын
I'd use it on my crazy high horsepower M52B28 E39 BMW!!
@mrb3991Ай бұрын
HI Awesome video 👍
@briceni6136Ай бұрын
I'd walked away from the screen before the incidents at around the 17:00 time mark. The toilet noise followed by 'O.K number 2' and 'That's how you know you're full' really had me a bit concerned. Name is good BTW.
@Mtech_garage
Ай бұрын
That was not my intention at all 😅
@DaGauntlettАй бұрын
Good name. Only the logo could be more flashy
@Mtech_garage
Ай бұрын
Working on hat
@enriquegonzalez918Ай бұрын
The name seems good brother
@Mtech_garage
Ай бұрын
😁😁
@race-itАй бұрын
You should of used super clean products on that gearbox to get it clean
@unclebrokendownbeamer9645Ай бұрын
Man, I'd use that cleaning package for my 2009 Hummer H3T... recently had a radiator blow, which houses the transmission cooler, which then caused the transmission to overheat and blew the pan gasket and both lines... my engine bay is absolutely covered in coolant and the whole underside is covered in transmission fluid from the front bumper all the way to the rear differential... it's an absolute MESS... HELP ME OUT 🤣
@jimcobm3Ай бұрын
Hey Mark, maybe you should do a dry ice cleaning underneath when you finish?
@Mtech_garage
Ай бұрын
I’d love to but it’s very expensive 😅
@jimcobm3
Ай бұрын
@@Mtech_garage I'm not saying to buy the equipment but to take the M3 to one of the shops that can do the cleaning for you.
@richard.monroeeАй бұрын
I hope you kept the original engine with the matching numbers for a future auction!
@Ag-kt3je
Ай бұрын
I think this car came without the engine
@Mtech_garage
Ай бұрын
Unfortunately it didn’t have an engine or else I would have 😁
@huutee1Ай бұрын
do the underside like the mustang
@user-lr8jh3mx7hАй бұрын
I like it 👌
@marc5460Ай бұрын
new name dude ? tnx for the video
@Mtech_garage
Ай бұрын
Yessir 😁
@gregolsson4370Ай бұрын
Paint the gas tank black. Its gonna look better when u do
@erezyoalАй бұрын
The diff is limited sleep ?
@andrewjacob6105Ай бұрын
❤❤❤❤❤❤
@WiseInvestor123Ай бұрын
like the new name
@GeorgeGravesАй бұрын
You didn't finish the m3 replica?
@luiscamargo6473Ай бұрын
Ever thought of Marc Motorhead?
@Mtech_garage
Ай бұрын
Too long in my opinion
@jaroslavkompit1852Ай бұрын
🎉❤
@yuuki603Ай бұрын
😈🔥🔥❤️
@danfarmer6730Ай бұрын
I like the name Mark
@jct300mАй бұрын
Liked the Motorhead KZread channel name myself....
@HoustonRoadАй бұрын
Ok, no more motor_head garage. Mtech works!!
@keithmarshall516Ай бұрын
I would use the Super Clean degreaser on my Hair.🤣
@avrahamg7925Ай бұрын
You might as well paint the gas tank to match the bottom of the car
@urmaritoryoutube8559Ай бұрын
💪😎👍
@user-be6pf5rp3qАй бұрын
I wood love some super clean I wood clean a rv
@MrTetedefouineАй бұрын
Finally the name change !
@Mtech_garage
Ай бұрын
😁😁
@waynek921Ай бұрын
Mtune. I really like your channel , I started watching after you painted vtunes blue stang.. great work boys....
@tomonagaoutdoorsАй бұрын
Like the name
@markmcdouglas3700Ай бұрын
I suppose "greasemonkey" was taken. 😂😂😂 Just kidding, we not here for the name, but the content!
Пікірлер: 156
Have had no problems finding you what’s in a name anyway enjoy watching you and you family v tune 23 garage you boys are magic
@Mtech_garage
Ай бұрын
I think for people who weren’t subscribed and didn’t put the .co after
I like your TY channel name, has a catch to it Mark 👍🏻 gosh that little red M is looking sooooo good. You have to be really excited 👊🏻
@Mtech_garage
Ай бұрын
Thank you!
You might want to consider making the lower part of your gearbox bracket a T-Section to give it some strength, the two triangles meet in the centre putting all the stress in one point with nothing to stop the lower section flexing. Welding a small lip 90' to the lower brace along its length should stiffen it up nicely. Original part had a box section for strength.
I am not sure if you are aware of this but when viewers like me try to connect to your site using a bookmark from when your site was called Motorhead a message pops and says "This page isn't available" with no mention that your site has been re-named. The only reason why I even knew your channel was still in existence was becuase your newest video showed up on the sidebar as a suuggested video to watch.
@Mtech_garage
Ай бұрын
I’m not sure how to prevent that 😅
@philtucker1224
Ай бұрын
@@Mtech_garageMarc I didn’t have any problem, ( I guess as a subscriber? ) your channel just continued over despite the name change and still shows subscriber numbers and the “subscribed” bell symbol etc so no action was required by me.
@philtucker1224
Ай бұрын
Marc when you are painting small pre-cast parts prior to assembly it doesn’t hurt to just warm them slightly before spray painting and then they will cure and dry that bit quicker between coats. Just saves you half an hour when reassembling. Loving this build 🙏🇬🇧
@jimwiskus8862
Ай бұрын
Just curious when you say bookmark is that in Google or another search engine? I subscribed on KZread a couple years ago. I haven’t missed a one.
@jimwiskus8862
Ай бұрын
Man Mark that E30 is coming along. Looking forward to the next drop. I like Mtech, I also thought of Mtune. Keeping the brothers together.
Like the new channel name Mark! Agree about the old name and the band issue, noticed from doing prior searches. Love seeing progress on the M3. Keep Orange Crushing It!
It's content like yours is why I watch car rebuild vids. I dont want to be sold anything, and I dont care how you spend your money. Please never change
bro, whatever makes you happy I think is fine for us, we appreciate what you do, your effort to get ahead and without clearly leaving aside your growth and professionalism! Greetings from Costa Rica Pura Vida! 🤙🏼
My morning coffee with MTECH Thanks Mark! love the OG m3 grille nailed it.
Name of channel doesn't mean much to me it's content and steady content is what matters do enjoy watching you and your brothers as well keep up the awesome work
Car is coming together. Stay safe and be well. God bless
The M3 Is so cool. Back in the day I had a 1987 325i when I was stationed in Germany. It was cool but not that cool. Don’t sweat the fuel tank color. No ones going to see it. As for the cleaning products, I’ve got 7 cars mostly older) so I’m ALWAYS dirty. Thanks!
The M3 is looking good.
Looks legit .. as for the cleaner would use it on everything!!
Looking nice good work as always mark hope it brings you joy bro I know it's your dream car man and I remember you saying something about it being ready by the time you have your wedding in some episodes now I hope it will be liking it man!.. ✨👑✨👍👍👍✨
Car is looking fresh Mark. Also the new Channel name is good. Keep up the great content.
@Mtech_garage
Ай бұрын
Ok thanks!
Yet again, Mark, awesome content. Slow and steady wins the race! I would paint the tank black. AS for the cleaner, I would use it to clean the engine bay of my classic Z31.
Great video Mark thank you!
Nice work 🙌 can’t wait to see the m3 finished
I like the new name! Keep up the great work. And I love some super clean to detail S2000! 🍻
Excellent work, front end is sick.
I raced BMWs for almost 20 years. When you said you were going to change out the rear wheel bearings I just smiled because I have the special tool in my garage (racers change them every season), and guessed that you didn't. The car is coming along nicely, take your time and enjoy the process.
Coming along nicely
Great video. Love the new name 👌🏻
Keep up the good work Mark.
@Mtech_garage
Ай бұрын
Thanks, will do!
Nice project, ol best!
Great new name !! And that Beamer is going to be a super car !!!!!
Hi Mark. Long time subscriber here. Love your content and your amazing work ethic! I'm rescuing an '86 Z28 Camaro that has been in my family since new. I could sure put that Super Clean care package to good use on this project! Please pick me! Peace.
Love the name,suits you an the channel,much respect from New Zealand 👊
I always use the degreaser to clean my engine bay and the wheelwells and also there is side of the Rims
Great name in my opinion it suits the car project. Keep up the great work and keep the content coming!!
Hey Mark, nice progress, looks great, Agree with @James.O below and think that there should be more redundancy built into the mounting point to the body i.e. four securing bolts two each side with the equivalent distance between bolts as per your factory mount.
😄 I was wondering wtf is an Mtech and when did I allow notifications to it. Cool name dude.
@Mtech_garage
Ай бұрын
😂😂 thank you
was in same position as you with the rear suspension which is similar configuration as yours, its quite a handful to push out when you have to balance and operate the press, i not touched it for two months as i am still building my press to push out the bearings, all in between other ongoing jobs, all a bit mad, but i love it
Love your channel!
That red looks super clean nice mark👍👍
Congrats Mark on the new channel name. The E30 is looking great. Keep up the great work
@Mtech_garage
Ай бұрын
Thank you
Keep up the good work
It’s a great project, if hqv probably shot blasted the components and had them powder coated and achieve a flawless finish. Also my ocd would push me to restore the underside of the car too.
I would love some free super clean!! I use that stuff on everything that needs cleaning.
Hello Mark my son the name is spot on keep it 💯 anyway how are you fella not seeing that much of yuri or Ben now thay have slowed right down with the videos so glad you are still pushing them out and thay are great to the bmw is looking fantastic by the way so we'll done ✔️
@Mtech_garage
Ай бұрын
Thank you, and they’re doing good 😁👍
I like the mteck I also like how you show how to fix the vehicles
14:44 clear coat it with about three coats or a clear rock chip coating and leave it grey/gray...
Nice !! Like the name
Pretty good welds to me
Great video
Very nice! And I like the channel name.my little buddy
Great name for a knife too.... :) Can't wait to see that M rip.
That colour paint on the diff cover will grow on you, it, in my opinion, looks much better than too shiny silver, thanks for the content
Great stuff thanks
This car needs a underside full restoration, u should do this as the next phase 👍
@Mtech_garage
Ай бұрын
Not a bad idea
Sound good the new name
Cool video, I quit watching a bunch of KZreadrs but I always watch MrGonein60, Flint is a very talented man, but I saw you on his podcast so I'm following you again,
Hi Mark I think there is another trim between the bumper and metal grille missing.
@Mtech_garage
Ай бұрын
Yea I have it, the bumper is not buttoned up yet 😁
Cool name bro🎉
This is going to a great car
I will use the super clean for my truck
i know how you feel im just stripping my eclipse rear suspension down to replace all rubber
Attaboy Marky! What numbers will M Grande be making? Horsepower and Torque wise? A SuperClean kit would be nice to keep my motorcars in pristine condition. Drive A LOT and am obsessed with keeping my undercarriage components and wheel wells clean
The M3 is looking sharp. You purchased a SECOND one ?
I've been watching you for years mark, it's also a cool name on the channel.. I could definitely use some cleaning products if possible I'd appreciate it
Old school m3😊
I would love to have super clean products to clean my vehicles and garage.
love the name
Did you have to purchase E30 M3 doors? Or did you create your own lower panel to match with the fenders and quarters?
👍🏻👍🏻👍🏻👍🏻👍🏻nice name
Good name
Mtech, I like It! 👍
I do like the name my friend ❤
We can’t do things like this anymore in Australia they have the slightest bit off damage the are scrapped
I'd use it on my crazy high horsepower M52B28 E39 BMW!!
HI Awesome video 👍
I'd walked away from the screen before the incidents at around the 17:00 time mark. The toilet noise followed by 'O.K number 2' and 'That's how you know you're full' really had me a bit concerned. Name is good BTW.
@Mtech_garage
Ай бұрын
That was not my intention at all 😅
Good name. Only the logo could be more flashy
@Mtech_garage
Ай бұрын
Working on hat
The name seems good brother
@Mtech_garage
Ай бұрын
😁😁
You should of used super clean products on that gearbox to get it clean
Man, I'd use that cleaning package for my 2009 Hummer H3T... recently had a radiator blow, which houses the transmission cooler, which then caused the transmission to overheat and blew the pan gasket and both lines... my engine bay is absolutely covered in coolant and the whole underside is covered in transmission fluid from the front bumper all the way to the rear differential... it's an absolute MESS... HELP ME OUT 🤣
Hey Mark, maybe you should do a dry ice cleaning underneath when you finish?
@Mtech_garage
Ай бұрын
I’d love to but it’s very expensive 😅
@jimcobm3
Ай бұрын
@@Mtech_garage I'm not saying to buy the equipment but to take the M3 to one of the shops that can do the cleaning for you.
I hope you kept the original engine with the matching numbers for a future auction!
@Ag-kt3je
Ай бұрын
I think this car came without the engine
@Mtech_garage
Ай бұрын
Unfortunately it didn’t have an engine or else I would have 😁
do the underside like the mustang
I like it 👌
new name dude ? tnx for the video
@Mtech_garage
Ай бұрын
Yessir 😁
Paint the gas tank black. Its gonna look better when u do
The diff is limited sleep ?
❤❤❤❤❤❤
like the new name
You didn't finish the m3 replica?
Ever thought of Marc Motorhead?
@Mtech_garage
Ай бұрын
Too long in my opinion
🎉❤
😈🔥🔥❤️
I like the name Mark
Liked the Motorhead KZread channel name myself....
Ok, no more motor_head garage. Mtech works!!
I would use the Super Clean degreaser on my Hair.🤣
You might as well paint the gas tank to match the bottom of the car
💪😎👍
I wood love some super clean I wood clean a rv
Finally the name change !
@Mtech_garage
Ай бұрын
😁😁
Mtune. I really like your channel , I started watching after you painted vtunes blue stang.. great work boys....
Like the name
I suppose "greasemonkey" was taken. 😂😂😂 Just kidding, we not here for the name, but the content!