Small suggestions: Please move the welder away from the iron dust next to the grinder. Thank you very much for the inspiration with the height-adjustable table.

Best design i saw. Couple of sugesstions 1. Place sparks separator near down rear roller (plate close as possble to belt with 30-45 degrees to it) to turn sparks down. 2. Place main sparks "trash can". Under front down roller box with water with easy dismount. It will not holds all sparks but even if it will catch 70% of it - it makes your workshop cleaner and much easy to cleanup. Good luck and thanks. Like and Subcribe :)

This video taught me 2 tricks to unbend or stretch metal. Thanks for that!

Уважение мастеру,все до мелочи просчитанно.Качество на век!Уважения себя,уважение к своему изделию,уважение к своему рабочему месту и оборудованию.Все размеренно и не спеша.У нас так не работают,а жаль.!Спасибо,по твоиму и зделаю такой гридер.

Beautiful design, love the attention to detail.

That hammering for getting 90deg. Just fantastic! Thank you!

Not many guys use a dial indicator, pantograph or shaper to make their belt grinders but was DELIGHTED to watch your serious metalworking skills. Beautiful design and execution!!!

@bartharkemametalworks2299

4 жыл бұрын

thanks!

I enjoyed watching your movie. You showed a decent and very careful job: smooth welds, elements perfectly polished and sandblasted. For me, the icing on the cake are brass washers and a beautifully engraved ID plate. A very good varnish on carefully prepared metal allows to believe that your grinder will actually work for many years, as you expect. I was particularly delighted with the use of cold forging to achieve exactly 90 degrees - I buy this idea gratefully. Compliments from Poland, your grinder is very distinguished by the quality of workmanship. :)))

Interesting to see all the different machines used in this project and thanks for including how the welds warp metal and the different ways of correcting it.

@bartharkemametalworks2299

4 жыл бұрын

Thank you Tom

Quality build. Best design I've seen so far.

@bartharkemametalworks2299

4 жыл бұрын

Thanks

Great project. Seriously overbuilt is how I like them.

Excellent, thanks for sharing.

Definitely the best I’ve seen built yet, it’s a beast! It will outlive us all and I look forward to seeing its new stand! Happy grinding!

@bartharkemametalworks2299

4 жыл бұрын

Thanks Joe, Happy Grinding

"nice paint job, I'm happy with that" ... me too, nice and shiny, great job!

Great design and execution. You have some REALLY nice tools.

Absolutely incredible! Beautiful machine!

It runs so smooth! Very nice.

Stunning work! Really functional. Love the idea... 🇩🇰🤙🏼

Quality work, inspirational, thanks!

Excellent job!! Very informative! Learned some tricks! Well done! Best belt grinder build I've seen!

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

Great Video and Beautifully Built Machine! I learned SO MUCH from watching! Thank You for Sharing! Have A Super Week!.....Gus

You sir are a master craftsman. Well done. It would sell!

Wow I'm in love with all the tools in here!

@bartharkemametalworks2299

4 жыл бұрын

Thanks, me too ;-)

The things a beast. Nice work

A very nice machine. Thanks for sharing. 👍

Really Beautiful Work! Some of the best TIG welding I've seen! Very Nice! I'd LOVE to have a nice 2 x 72 belt grinding rig like that!! Congrats!!

Metal warping from welding was a constant cause of stress while I was building my 2x72. At one point I even threw a chipping hammer putting a large dent in the side of my table saw 😔. I loved your solution to the problem, I only wish I had thought of that. Beautiful machine and great video 👍

@bartharkemametalworks2299

4 жыл бұрын

Thanks, and I know the feeling. Sometimes it gives a lot of satisfaction, the other time frustration. But we just learn as we go.

Your the real deal..your a talented dude , great job 👍👍👍

Very nice work!

Excellent step-by-step video... Really enjoyed watching it...

Love that design. Ive been wanting to build a 2x72 grinder for a long time now and this gave me motivation to get started on it.

@bartharkemametalworks2299

4 жыл бұрын

Thanks, good luck with your build. If you have any questions than let me know. Btw, Jeremy Schmidt also has a great design: kzread.info/dash/bejne/k5OGzq5qf5DIe5c.html

Wow, brilliant welding.....you must have done that before, looks great !

Brilliant build.

Great design and welding skills.

Great job. I like your attention to details,

Beautiful work 👍🙂

Good build, Nice quality, and an excellent craftsmen. I enjoyed watching.

That was an excellent build, thanks for sharing with us! The attention to detail, including the angle graduations and engraved nameplate, make your machine look pro.

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

Beautiful work man.

RESPECT for problem solving ways, and thank you for teaching something new

@bartharkemametalworks2299

4 жыл бұрын

Thanks 👍

You are very skilled fabricator. Nice work indeed. I very much appreciate you attention to detail and the quality of the finished product.

@bartharkemametalworks2299

3 жыл бұрын

Thank you 👍

Great Job! 👍 I enjoyed watching your video. Thanks for sharing your knowledge. J-Ray Victoria, Texas

Very nice! A well thought out design and great craftsmanship! Beautiful!

@bartharkemametalworks2299

4 жыл бұрын

Thank you

Very well balanced design!!!

Some really good tips to fix your mistakes. Thanks.

great job and what great tools to work with.

Very well done and thought out!

@bartharkemametalworks2299

3 жыл бұрын

Thanks!

Good ! Reliable and high quality! 👍

@bartharkemametalworks2299

4 жыл бұрын

Thanks

What an INCREDIBLE build!!! And your welding is almost robotic, so GOOD!! WOW!!!👍👍 ~Jay~

Wow I love you work! you are an amazing craftsman! Thank you for sharing.

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

This is beautiful work. Fantastic video. Thanks!

@bartharkemametalworks2299

4 жыл бұрын

Thanks 👍

Holy crap, I thought I had a tool obsession! He's got one of everything! Nice work!

@bartharkemametalworks2299

4 жыл бұрын

Thanks! And yes, never enough tools. Still have a long list of 'wanting to make or buy'.

Great Job!!

Great work. add a vacuum cleaner under it to collect dust and sparks. what you made is exceptional. beauty and strenghth. strong motor. solid. and nice color.

@bartharkemametalworks2299

4 жыл бұрын

Thanks, And yes I will make a dust collector and spark protection.

Exceptional quality!

@bartharkemametalworks2299

Жыл бұрын

Thanks!

Hi Bart and a good day to u. I'm a Senoir Master ASE and have fabbed race cars, race quads, custom equipment of all sorts and in my mind am an excellent fab guy. The best compliment that I can give u is that I would "trust" you to make any part I may need but was unable to do. I am currently rehabbing a spinal and SI joint fusion and would have zero fear of having u make something I need and would even be ok with u making any mods to it u may deam necessary. This is coming from a person that more often than not has scrapped parts I'm not happy with. Great work as always Bart!!!

Nice, well done. Just wanted to say that flame treating that plate would also have allowed you to flatten or straighten it to the desired position, but stringer welds in the right place as you demonstrated did it too! Thanks

What an outstanding build. I love your attention to detail and you document everything really well. Seems like an almost perfect design. 👍

@bartharkemametalworks2299

4 жыл бұрын

Thank you

Love your explanations why something went wrong and how to correct it. Thank you a lot I've learned some new tricks.

@nopenheimer

4 жыл бұрын

I agree. I watch things like this to learn, not just see the end result, and always appreciate seeing mistakes.

Really nice work. I especially appreciated the welding tips and tricks. Thanks.

@bartharkemametalworks2299

4 жыл бұрын

Thanks 👍

very professional looking build.

Beautiful job! That is a seriously well built machine. Subscribed!

Very nice!

A lot of loves there and true experience sharing. Good Video. Thanks.

@bartharkemametalworks2299

3 жыл бұрын

thanks!

Great work!

Awesome job brother love it

As always your work is the highest quality!

@bartharkemametalworks2299

4 жыл бұрын

Thank you Chris

Well done 👍

Great blue collar work done here!!! Enjoy your build as much as you can and hopefully we will see future projects with this tool in use...?

@bartharkemametalworks2299

4 жыл бұрын

Thanks! And yes, this machine will be used a lot in future projects. A just moved to a bigger shop and need to organize the shop first. Next project will be making a nice table for the Grinder with adjustable height.

Really nice work. I am building my own belt grinder and have watched quit a few videos on it and I ran across this one. I've watched this one and the ones on the ultimate bender and it wasn't until then I noticed your name is Bart. Wow me too. Nice to meet you Bart!

absolutely brilliant work sir . thank you for sharing

@bartharkemametalworks2299

4 жыл бұрын

Thank you

Outstanding 😎

Excellent engineering and workmanship. Worthy of an award for your design and hard work!

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

Nice tutorial. Beautiful weldings. Good tips. Continue the good work.

@bartharkemametalworks2299

4 жыл бұрын

Thank you

It's a pleasure to watch you create. I wish I had your skills. Keep up the good work.

@bartharkemametalworks2299

4 жыл бұрын

Thanks

Outstanding build. Unbelievable skills. Brilliant machinist. Can't say enough about the quality of your work and the thought that goes into it.

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

This is an example of a quality machine. You have a talent my friend. I like the versatility of the machine and the options you chose to put into the design. The way the table can be put into all angles was very clever. Keep up the good work and be safe where you are, I'm in Salem Oregon USA.

@bartharkemametalworks2299

4 жыл бұрын

Thanks 👍

Best grinder build I have seen! Thanks, Bart

@bartharkemametalworks2299

3 жыл бұрын

Thanks 👍

Great job! Nice tools to build a nice tool

Great craftsmanship !

Very nice work and some great tips.

@bartharkemametalworks2299

3 жыл бұрын

Thank you

Very nicely done. Good design. Excellent construction.

@bartharkemametalworks2299

4 жыл бұрын

Thank you

Pretty solid looking Work!

@bartharkemametalworks2299

3 жыл бұрын

Thanks 👍

Nice machine, well done

It is definately a beast of a machine... Great job Bart! New sub.

Nice job!

EXCELLENT PIECE OF WORK.

@bartharkemametalworks2299

3 жыл бұрын

Thanks!

Excellent job! Best I’ve seen.

@bartharkemametalworks2299

3 жыл бұрын

Thanks!

Fantastic! I envy your skill and access to the tools to make an amazing belt grinder.

@bartharkemametalworks2299

4 жыл бұрын

Thanks

Excellent all the way Bart. Much enjoyed this video, and will check out your others!

@bartharkemametalworks2299

4 жыл бұрын

Thank you 👍

Great job!

@bartharkemametalworks2299

2 жыл бұрын

Thanks

Nice work. And the angle grinder setup is pretty sweet too. Very versatile. Props to you.

@bartharkemametalworks2299

4 жыл бұрын

Yes, and the angle grinder works great to. It looks like a hacked DIY tool but I use it a lot. Even know a have the big 2x72 ready, the smaller one is great for small work.

Beautiful craftsmanship. I haven't seen a shaper or a pantograph since my days in the Navy (1960's)! Wonderful tools, nice to see someone still using them.

@bartharkemametalworks2299

4 жыл бұрын

Thank you. I like to old machines. Nice quality and looks.

A work of art. Nicely done.

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

That was a labor of Love, great job lots of time spent doing it and skill as well just outstanding 👍💯🇺🇸

Seems to be the best one I've seen built DIY

@bartharkemametalworks2299

4 жыл бұрын

Thank you

That is a work of art! You're a talented bloke

@bartharkemametalworks2299

4 жыл бұрын

Thanks!

You're welding like a god

Beautiful design and fabrication. In one shot, you were cleaning your metal prior to welding. I saw what looked like brake cleaner in the background. I hope you're not using the brake cleaner for weld prep. I saw a story about a guy who did that and all that horrific heath problems he got from inhaling the phosgene gas created by the combination of brake cleaner and argon gas. Love the fix for the warped plate.

@bartharkemametalworks2299

4 жыл бұрын

Thanks for the compliment and tip about the brake cleaner. I did use it but not a lot and will use something different in the future. Anything you can recommend?

@nvlvdave

4 жыл бұрын

@@bartharkemametalworks2299 I use mostly acetone or occasionally lacquer thinner and haven't had any problems. They both evaporate so fast that I go thru a lot, but switching over to one of those chemical squeeze bottles and applying to a rag instead of the metal helped consumption quite a bit. I was shocked when I saw that story. I use brake cleaner and I weld; just by chance I never combined the two. The poor guy had all kinds of side effects - I want to say vision loss, kidney failure and on and on. I'm going to see if I can find a link to that story and try to post it here for you and your other subscribers (I subbed after this video). Your fabrication really is outstanding.

@nvlvdave

4 жыл бұрын

I can't find the original story I saw, but a quick google of "welding brake cleaner" or "phosgene" will turn up many results. I just read one where a guys buddy died from it.

@bartharkemametalworks2299

4 жыл бұрын

@@nvlvdave Thanks, I think I will switch to acetone then. I noticed that Jody from weldingtipsandtricks also use that.

Super nice build! Very much enjoyed watching the video!

@bartharkemametalworks2299

3 жыл бұрын

Thanks!