My Biggest Mistake Was Not Building These Sooner
Тәжірибелік нұсқаулар және стиль
All My Workshop Furniture Plans: www.thomascustomwoodworks.com
Lightweight Folding Workbench Plans: thomascustomwoodworks.com/pro...
Middleweight Folding Workbench Plans: thomascustomwoodworks.com/pro...
Wall-Mounted Folding Workbench Plans: thomascustomwoodworks.com/pro...
Пікірлер: 46
I love the idea of a folding workbench that can be easily stored on the wall of a garage. I also like that your designs are a bit better looking and sturdier than most DIY projects. I even think that it was a great idea to sell better quality plans than what we usually find for DIY projects, they should pay for themselves by helping us avoid costly mistakes. Due to life changes I had to give up on all projects (and my tools) for 15 years. I am now starting over and about to re-buy and rebuild my garage workshop and other storage from scratch. Your workbench will be part of it, but it is obvious that I need to build a few other items before tackling them. I am sure someone already asked this, and you might even have a video about it: What is the optimal order of construction, maybe with links to the projects?
@ThomasCustomWoodworks
4 күн бұрын
Thank you for the kind words and great questions. The optimal order of construction is what you need first in order to start building whatever it is that you will be building. That will be different for everyone. For me, my order of construction was 1) workbench 2) miter saw station 3) foldable work station 4) 2-for-1 tool cart. Then I built the other furniture as needed. If you don’t use the miter saw very much at all, then maybe that project will be further down the list, and if you have a lot of clamps on the ground then maybe the ultimate clamp rack will be higher. Hope that helps!
@nospamallowed4890
4 күн бұрын
@@ThomasCustomWoodworks Oh! I was under the impression that the foldable work table served as a workbench. And since it required the miter saw table I figured the miter saw table would come first. I will look up your workbench video, just in case I missed the point and the workbench serves a supplemental purpose.
I like all 3 designs. great builds! thanks for the video!
@ThomasCustomWoodworks
2 күн бұрын
Thank you for the kind words!
Glad to have discovered you. I also work in a one car garage.
@ThomasCustomWoodworks
16 күн бұрын
Thank you and thanks for watching!
Thanks for share this great idea. Now I can build my wargaming table and safe huge spot in my home.
@ThomasCustomWoodworks
25 күн бұрын
You’re very welcome.
To bypass the "need" for an impact driver, when running screws into wood, apply some bee's wax to the screws (not paraffin). Even 4" deck screws go in a lot easier. 😁✌🖖
@ThomasCustomWoodworks
24 күн бұрын
Great tip!
I can't understand why you don't have more likes on this video. It's a solid, practical, and easy to build design. As for the diagonal brace being better, I can only echo my eighth grade geometry teacher "triangles are always stronger than squares or rectangles".
@ThomasCustomWoodworks
21 күн бұрын
Thank you for the kind words and the info! I appreciate the support, much like the diagonal cross-brace.
I love all three....and definitely am going to build because my shop is probably smaller than yours but i do have a back wall available to hang one on! Thanks for the ideas
@ThomasCustomWoodworks
2 күн бұрын
Sounds great and you’re welcome!
Thank you for sharing this information on building a foldable workspace. This is a project 😊I might be able to do. It would be my dinner table, work space and crafting table. It would be wonderful for my little space. Thank you again for sharing.❤
@ThomasCustomWoodworks
2 күн бұрын
You’re very welcome. You can do it!
Really nice! Keep em coming.
@ThomasCustomWoodworks
9 күн бұрын
Thank you! I have another video releasing today.
my explanation for why diagonal braces are better... its because any racking of the structure places the diagonal member in tension or compression. A right angle joint in wood has only the fastener/glue to keep it in place and the vertical and horizontal members are like levers on either side of that joint... so it racks pretty easily. Adding that brace means that in order to rack it must not just overcome the strength of the joint, but also compress or stretch that brace... which is unlikely.
@ThomasCustomWoodworks
24 күн бұрын
Awesome thanks!
Why it works better is a long explanation but the simplest explanation of why diagonals reinforce better is because triangles are unique shapes meaning they can only exist in one shape with those lengths where a four sided shape is not unique based on the lengths there are infinitely many other 4 sided shapes that can be made with the same pieces so the shape when forces are applied is more able to bend or reshape itself. triangles because of this distribute the forces in a ratio of the angle of the force being applied to the shape and hold their shape much better. statics are complicated in how forces move through but the basic reason is a mathematics concept first.
@ThomasCustomWoodworks
24 күн бұрын
Hey thanks so much!
Brilliant design!
@ThomasCustomWoodworks
23 күн бұрын
Thank you!
Very nice!
@ThomasCustomWoodworks
2 күн бұрын
Thanks!
@ThomasCustomWoodworks
2 күн бұрын
Thanks!
Thanks
@ThomasCustomWoodworks
24 күн бұрын
You’re welcome!
Keeps everything square aka stronger. The horizontal one would allow it to rock even if slightly losing square and losing strength.
@ThomasCustomWoodworks
25 күн бұрын
Thank you!
Stronger due to better account hotizontal and vertical forces... In the same line if you add a hotizontal and another vertical
@ThomasCustomWoodworks
25 күн бұрын
Awesome thanks!
If you mount the castor mounts on the opposite faces, your foot print would be smaller.
@ThomasCustomWoodworks
25 күн бұрын
Great tip!
Shopping list?
@ThomasCustomWoodworks
19 күн бұрын
Yes there is a list of all tools; accessories, and materials needed in the plans.
why is this video private but still plays?
@ThomasCustomWoodworks
24 күн бұрын
It is public.
Triangles much stronger than squares/rectangles
@ThomasCustomWoodworks
24 күн бұрын
Absolutely.
👍🙏🇮🇳
@ThomasCustomWoodworks
25 күн бұрын
Thank you!