Mustang V6 3.7 *INSANE* Exhaust Pt.2 - Headers, Muffler and Res Delete (Startup, Revs, Flybys, 0-60)
-When it says (Stock) it means that the only mod was exhaust setup below. (No tune, No Manifolds, No CAI)
Here was my "controversial" exhaust setup I had on this car. Sold it a while ago
Setup Is BBK Shorty Headers-True Dual Resonator Delete(||)-Muffler delete with 12 inch long rolled tips.
LOUDNESS LEVEL
Interior - 7/10
Exterior - 8.5/10
This is different for everyone. If you don't agree with this rating then check out my newer videos
THE SOUND IS NOT FOR EVERYONE as it is raspy and very loud, which I like, but everyone has got their own opinion on sound. This is a love it or hate it setup. Haters still gonna hate though.
If you don't like the sound of this you might like an X pipe setup more.
I have tried to include most angles and rpms- even the not so good sounding ones.
IMO, don't run this setup without the headers and tips as they tuned the sound a little bit. I had it with stock tips and no headers and I didn't like the sound.
3-4k rpm range is a little raspy but after that it sounds pretty cool.
It is also incredibly loud - Could be heard from over a mile away.
Around most catless setups in terms of volume.
People seemed to like the first so I made a compilation of almost all the remaining videos of this car.
Looking back-I don't know why I did the FBO and stock labeling on the bottom because it is confusing to some. Just know that when it says FBO, the car is revving to the sky and making a bit more power. Sounded pretty different when I was editing the video.
MODS
-Roush Cold Air Intake
-AMR Upper and Lower Ported Manifolds
-BBK Shorty Headers
-MPT 93 PRX
0-60 was on a very slight downhill. Not enough to make a big difference though. Probably around 4.8-4.9 on a completely flat road but that is just a guess.
Yes you can still get good times with the "power robbing" true duals.
If the video quality doesn't seem that good its probably because I redownloaded almost every video back from Google photos.
Filmed in Mexico and Private roads
Yes it's a V6 if you missed the description.
Ported Manifolds
automafiaracing.com/ported-15...
Headers
www.americanmuscle.com/bbk-sh...
Cold Air Intake
www.americanmuscle.com/roush-...
Tune
www.morepowertuning.com/15-17...
Пікірлер: 128
Your setup sound so good bro, I just got a 2017 v6 mustang and I've been looking up different setups and yours is number one for me 🤝🏾🔥🔥🔥🔥🔥🔥🔥🔥🔥
Insane sound for a v6
I love the sound. thank you for sharing. I wish there was more engine mods for the V6 Mustang.
Honestly man I wish you would’ve kept the car it’s prolly the best 3.7 I’ve heard and it just has such a unique sound to it
@anotherred5.092
2 жыл бұрын
Thanks, Yea I miss it.
@minipekka1241
3 ай бұрын
I have the same setup
Best Sounding 3.7 ive ever heard
I got 2016 in shadow black little over a week ago and its my first manual car. Its been really fun but definitely have some learning to do cuz i wanna be able to drive like that looks so fun
just got a 2018 v6 a few weeks ago and im loving it. ur car sounds dope too not my style cause its too loud but it sounds sweet
Video was well made,straight to the point..
That sound is amazing..!!
Wow sounds really nice. These 3.7 's where def underrated. Would love to swap one into a new edge or fox body just to see what it does in a lighter chassis and to see peoples reactions. Nice set up.
I gotta talk a lil shit, its sounds like a 350z when your rev it. But I do gotta give it to you, caught me off garud a little bit when you start her up. Good shit man!
This is the baddest V6 I have ever heard in my life!!!!!
Got a 2010 v6 mustang with a cracked head just hanging out in the garage. I'm hoping to be able to fix it this summer...at least i hope.😔
Sounds crazy when you lift the gas in high rpms
Nice
How much horsepower did it have?
I’ve got the muffler delete with the x-pipe and stock headers. I was looking up videos of how it would sound with shorties because mine is raspy af now. Definitely gonna switch to straight pipe instead of the x though! Only questions I have is which tips did you get? And did it’s sound like this before the tune and ported manifolds?
@PoisonousMelon
Жыл бұрын
He has 12 inch long tips
nice
Perfect for my ears, do a real 0-60 test
This sounds like a European V8 and i love it! Do you have any other plans for it?
@anotherred5.092
2 жыл бұрын
I was going to procharge it but then ended up trading it in for a gt.
@cyrus986
2 жыл бұрын
@@anotherred5.092 damn I love when people build a V6. It’s just so much more unique than a GT but there’s nothing wrong with a GT. What are your plans for the GT when you get around to it?
Sounds good man. Was wondering if you had any experience with just headers and a muffler delete with the stock cats and resonators. Looking to do that or just buy roush axle back and wanted to hear your thoughts on it. I’ve got an 2011 3.7
@anotherred5.092
Жыл бұрын
Thanks. Sadly I have no experience with just the muffler delete. I got the muffler and res delete at the same time. With the muffler delete and shorty headers only it should sound somewhat like this but very toned down. Probably will sound good though imo.
@RageSniper0227
Жыл бұрын
@@anotherred5.092 appreciate it. Think that’s what I’m gonna go with then.
@PoisonousMelon
Жыл бұрын
@Alec Huber muffler delete is a bit more raspy and not much exhaust tone after 6k rpm. I have a 14' 3.7. It sounds decent but definitely not satisfactory or as good as this guys setup thats for sure
@RageSniper0227
Жыл бұрын
@@PoisonousMelon hey man thanks for the reply. I pulled the trigger on shorty headers and muffler delete and added some resonated tips in place and I love it. Headers completely change how the car sounds
I ran a x pipe,roush axle backs and roush cai but it was really raspy at high rpm’s do you think going true dual will make a difference with the rasp at higher rpms while keeping the mufflers
@anotherred5.092
2 жыл бұрын
It might make it a little more raspy, but it's going to be a deeper rasp. Probably going to sound close to this setup. You might want to try out some resonators or shorty headers
Quick question? What type of full exhaust you was running on this one? Sounds good
@anotherred5.092
2 жыл бұрын
Full Setup in description
Lmao nice bro i did the same set up 👍..i got a 2017 just like yours & looks & sound the exactly like you
Yooo where did you get that steering wheel?? It's clean asf for a base model and doesn't look over the top like other wheels I've seen. I want it for my car
@anotherred5.092
2 жыл бұрын
I belive it was late model restoration. It was the SVE x550 I think.
where did you buy the steering wheel ?
How did you prevent your car from going into limp mode with the two step cause I’ve herd of mustang with a wig box going into limp mode after 2 stepping for too long
@anotherred5.092
2 жыл бұрын
I didnt do it very often but my 2 step was from the tuner. Might happen more with a WOT box but I'm not sure.
What do you mean by true duel muffler delete did you cut the mufflers and the resonators in the middle off?
@anotherred5.092
2 жыл бұрын
Yea everything was gone pretty much. By true dual I meant the resonator was deleted and replaced with 2 pipes. No X or h pipe. And both mufflers in the back were also removed.
I have a similar set up with FBO, MPT 93 tune. Is shifting at 7500 the most beneficial shift point? Isn't that well beyond peak power? I never had mine dynoed so don't know the power curve with my mods.
@anotherred5.092
2 жыл бұрын
I think peak power was around 7000 from what I could feel. I just did it for the videos and datalogging. I'm not sure how the engine would hold up in the long term though but they seem pretty tough.
Fucking so sick
What tire size did you run for the 3.7? I currently have 275/45 PP wheels and they spin a ton (on MPT tune). Any tips on traction or tire recommendations? Thanks!
@anotherred5.092
Жыл бұрын
What tires do you have
@keenan9756
Жыл бұрын
@@anotherred5.092 nitto nt555. Thinking about trying some Atturos that I’ve seen around YT lol
I got a question did it make a difference whether or not the headers were ceramic or chrome besides the weathering
@anotherred5.092
2 жыл бұрын
Don't think so
I’ve got a 3.7 V6 2016 roush but I don’t know much about cars and want it to sound real nice, what should I add to make it sound good?
@mr.vacation4348
5 ай бұрын
-Long tube headers they are more pricey then shorty headers because not only do you have to buy the long tubes, you also have to get the short catted pipes with same brand as well to make sure they fit, different brands won’t fit. I recommend bbk, but obk linguines are a cheap brand that come with both. -h pipe resonator delete, any brand works just make sure it’s good stainless steel and not an x pipe, gives more raspy noise - definitely roush or flow master axleback exhausts if you want mufflers, if not then go with and sr performance muffler delete.
are these 2.5 inch pipes or 2.25
Hey , does the bbk headers make a big sound difference? I was thinking of running this setup without the bbk headers
@anotherred5.092
2 жыл бұрын
Yea, I thought they made a fairly big difference. I liked it more with the headers. Ran it for a year without them but I wasn't sure how I liked the sound.
@bigsolo7498
2 жыл бұрын
@@anotherred5.092 oh okay , yeah because all the setups I seen mainly have bbk headers. And one more question, without the headers, is it louder? Or the bbk headers make it louder ?
Should I keep my v6 and do this as well and add a pro charger in the future.? Everyone hates on my v6 and idk if I should keep it anymore
@anotherred5.092
2 жыл бұрын
You can if you want. I was in the same position and ended up selling my v6. Still miss it though. It was a great platform. I'm not sure why people hate on the 6 so much.
@ozzymero156
2 жыл бұрын
I’m in the the same boat as you, but sheeshh your front end looks sick af🔥
Sounds like a race car
idk if youll respond but what visual upgrades did you add? i like your front grille
@anotherred5.092
Жыл бұрын
Thanks. It's the rtr front grille without the lights. It also has the cervini c series chin spoiler, and an mmd rear spoiler. (The one that's not the v series, not sure if they still make it.) Those are all the main things but I also have the canards and diffuser fins although I forgot what brands they were.
@anotherred5.092
Жыл бұрын
Got most of it from American muscle and Cj pony parts
@kutari
Жыл бұрын
@@anotherred5.092 thanks so much goat!
Bro I want to get the ported lower and upper manifolds do you recommend them?
@anotherred5.092
2 ай бұрын
Yea it was a good upgrade for the money. It was minor though don't expect too much faster.
@Cheesy_Stang
2 ай бұрын
@@anotherred5.092 Yup 0-60 in 4.6 is good for a Mustang V6 I have the same mods as yours except the manifolds i get 0-60 in 5.6 seconds so 1 second off will be good
Wait you didn’t have a tune? Like in order to have ported manifolds and an exhaust and to shift at 7.5k you would need a tune right?
@anotherred5.092
2 жыл бұрын
No I did have a tune and yea you need it to rev that high. It was tuned by mpt. In the videos were it was reving that high I had the tune and ported manifolds plus some other mods.(Fbo) Shifted around 6.8k without all those mods.(when it says stock)
@ardengrosfeld442
2 жыл бұрын
@@anotherred5.092 ahhhh aight
I really wanna make mines sound like this but it’s not gonna be a manual😞
Lowkey sounds like a v8 at those higher rpms
Are the rear defusers the individual double sided tape on’s?
@anotherred5.092
Жыл бұрын
Yes
Man, I gotta comment on this MF again. IIRC you sold it for a GT, and if so, I think that was a whack move. IMO you should've kept it and put a Whipple 145AX at 18+ lbs of boost on that MF.
@minipekka1241
3 ай бұрын
I copy his setup don’t feel to bad
What is the catalytic converter and resonator set up. None perhaps?
@anotherred5.092
2 жыл бұрын
Stock cats surprisingly, and no resonator just two individual pipes. || (No x or h pipe)
What is your opionion on borla's exhaust build
@anotherred5.092
Жыл бұрын
Never heard borla on a s550 v6 in person, but I'm sure it sounds nice.
Where’d you get the manifolds, can’t find any for mine
@anotherred5.092
2 жыл бұрын
I bought them off American muscle
where did you buy the ported manifolds
@anotherred5.092
Жыл бұрын
Auto mafia racing
Do you have the link for the true dual resonator delete?
@anotherred5.092
2 жыл бұрын
It was custom work done by my exhaust shop, along with the muffler delete.
@jdblackout6234
2 жыл бұрын
@@anotherred5.092 oh I gotcha thanks
@jdblackout6234
2 жыл бұрын
@@anotherred5.092 would a automatic with this setup change anything of the way it sounds?
@anotherred5.092
2 жыл бұрын
@@jdblackout6234 It would sound the same but the shifting would be a little different.
Sir, ur acceleration is 4.6 sec 0-60, can you told me its stock or no ?
@anotherred5.092
19 күн бұрын
No, fbo with 275 rear tires
@zombiebiohazardplayer4961
19 күн бұрын
@@anotherred5.092what is that fbo?
Do you have any videos when it was straight piped but stock headers?
@anotherred5.092
Жыл бұрын
Yea tons. Should I post one you think?
@nicktennery326
Жыл бұрын
@@anotherred5.092 yeah I’m just curious, I know the headers are what makes it actually sound good lol. Boutta get your setup done tomorrow
@anotherred5.092
Жыл бұрын
@Nick Tennery Nice. I'll edit a video of that soon
@nicktennery326
Жыл бұрын
@@anotherred5.092 just got my car back with your setup. Sounds amazing. It pops, but mainly on shifts or if I just fill up my car with gas. Did the tune help with more pops or was it like that without the mpt tune
@nicktennery326
Жыл бұрын
@@anotherred5.092 also how long did it take for your headers to smooth out?
What size pipe exhaust did you have ?
@anotherred5.092
2 жыл бұрын
Stock piping size
What do you mean by stock and not stock?
@anotherred5.092
2 жыл бұрын
For the ones that say stock, the only modification on the car was the exhaust setup in the description. Engine was all stock, no tune.
Impressive! Unfortunately you can't install any exhaust system on your car in UAE, if you do you get a fine of AED10,000 and you car will get impounded!
@anotherred5.092
2 жыл бұрын
Ah that sucks
@dirteeshoe4069
2 жыл бұрын
@@anotherred5.092 yeah man, it does...big time, i wanna install one so bad but can't take the risk
What do you mean by 12 inch tips
@anotherred5.092
2 жыл бұрын
12 is the length of the tip. 4 inch outlet 2.5 inlet is what I used. That way its basically like an open chamber that the sound kind of resonates in. They should look something like this. www.amazon.com/KARCK-Exhaust-Stainless-Polished-Tailpipe/dp/B082HM56TZ/ref=mp_s_a_1_3?crid=3GRGB3LOVVX76&keywords=12+inch+long+4+exhaust+tip&qid=1637550225&qsid=139-7106035-6396451&sprefix=12+inch+long+4+exhaust+tip%2Caps%2C94&sr=8-3&sres=B082HM56TZ%2CB08BYQSZX1%2CB07P2D1LT4%2CB07C8FMJY1%2CB09C2F4XKW%2CB082MBZ7PN%2CB08BYQVWJX%2CB072MKK95Y%2CB0798DGK9V%2CB082CVCN83%2CB082D1HPBP%2CB07P4LFGQW%2CB0788NR13Y%2CB07988GHJY
@gabrielcordero8552
2 жыл бұрын
@@anotherred5.092 would 17” long 4” outlets be too long?😂
Could you put links to all the parts
@anotherred5.092
2 жыл бұрын
I'll post in the description.
How much hp is it pushing now
@anotherred5.092
2 жыл бұрын
I never dynoed it but probably somewhere around 290 wheel.
@nicktennery326
Жыл бұрын
@@anotherred5.092 it should be 295 whp with just an MPT tune. You prolly had this close to 330-340whp w headers, manifold, and CAI.
Cat Delete?
@christopherthomas900
2 жыл бұрын
What’s the whole set up ?
@anotherred5.092
2 жыл бұрын
Nope, Stock cats. Shorty headers>stock cats>true dual resonator delete>muffler delete
wtf, why is it so fast. lol
Break the bank and get a V-8
@anotherred5.092
2 жыл бұрын
I did, this was my old car
You need to put a 5.7 in there....way more power than that...
@ardengrosfeld442
2 жыл бұрын
What 5.7 and that’s a lot of work when he could just turbo his car and make 600 wheel on e85
Sounds like horse shit not horse power