Reppin’ for the cyclone community. Big ups bro

hey mike thanx for the encouragement bro...I have a 2016 with rev 9 flowmaxx axle back and getting the bbk's installed....this summer i'm installing the X pipe ...thanx for the vid ..now i look forward to installing this

Lol, you had us in the first half, then you went to the shop xD

A lot of help thank you! Just bought my mustang 3 days ago and wanna start making it my own and this was a big help!

@mustangmike3396

3 жыл бұрын

Trever Nungester glad I could help👍🏻

No bullshit bro keep this up this is a dope video! 💯

I am trying to have the same setup in my V6 2014 model, I already did the muffler delete, and Roush CAI, waiting for the BBK short header to arrive. Sounds sick bro

This video really helped me!!!

It sounds like my boat !!!! Which is a good thing. My boat is a 2 stroke V6 Mercury 350 and it makes such a good sound from a 6cyl finally a car can reproduce the same note as my boat engine.

Dude we need more content man , come onnnnn

Great video! 👏🏼

We need some more V6 content 🤘🏽

KidFresh back at it again

@mustangmike3396

4 жыл бұрын

Janelle Vega 🤦🏻‍♂️😂

you've got the same exact car I have LOL nice video man

@mustangmike3396

4 жыл бұрын

Dope lol thanks bro

That sounds nice 👍

Such an informative video, awesome!

@mustangmike3396

4 жыл бұрын

Perla Montes 👍🏻😂

HAHAHA the first gear slip made me laugh bruh. It sounds good. I got the exact same set up except my Xpipe is flowmaster. Hella crackles and pops

The cut to the muffler shop had me dying laughing lmfaoooooooooooooo when diy does go how you thought it would😭😭😭😭😭

How much did they charge you at the shop? I’m still learning. A friend of mine suggested cutting off the mufflers (only cost about $50 / which is groovy) but I’m still deciding on x pipe and h pipe…it does sound really nice though so now I’m leaning more towards x pipe cause of your video…so how much did they charge you at the shop? 😀

Sounds good.

RedRace is the best color for Mustang it's just suit him well

Do you get drone at 2k-3k rpm? I did bbk shorty headers, high flow cats, x-pipe and muffler delete, 😔 unfortunately is a bitter sweet sound, sounds amazing cold start, its makes popping sounds and so aggressive sounds, drone makes my ears bleed and at times its sounds like a 350z. Im thinking of putting the resonator back🙄 or the oem mufflers.

What tips did you end up going with? Sounds sick!

Sounds really good on the low rpms, only thing is I'm wondering why it's hard to make the car sound good at higher rpms.

@SirenS550

3 жыл бұрын

It’s not. Just put two 18” magnaflow mufflers against the x -pipe and it’ll be perfect

@alexfuentes1435

2 жыл бұрын

@@SirenS550 I agree that’s what I’m running sounds great

i gotta 5.o muffler delete,an resnator delete only. but Daaaaaaymn ur shit sounds f'n Awesome

I also have a mustang v6 and I am also weighing as I tunig him I like your videos greetings from watsonville upload more videos

@mustangmike3396

4 жыл бұрын

juni garnica thanks bro and yes videos coming real soon👍🏻🙏🏻

dope bruh. my name is mike, i have a 2016 mustang v6

The x pipe sounds soo gooood. Just deleting the resonator makes it sound like ass. Good bro sounds like a V8

Where did u bought the x pipe and did that effects the DEQ bro

Do you have a turbo or supercharger? or is the everything else stock except muffler shit

Shorties take away the rasp and make the exhaust sound very clean

Shhhhheeeeeeeeeeeshh..🌪🔥 Does doing any of this void warranty? I have one of these at 37k miles...

whats the music that started at 2:50 ? (:

So the GT X pipe went onto the V6 without issue it seems? Any fitment issues at all outside of the angle of exhaust at the end? There's only 1 X pipe for V6 the Im finding, and NO H-pipe. The GT x-pipes price is a lot nicer so Id love to do this install myself.

@akulmanoj6917

2 жыл бұрын

U just need to get adapters from 2.5 to 2.25

would this sound the same on a 08 or is that a stupid question

ngl im a little lost because pretty sure we have the same mustang but on the website it says that x-pipe wont fit my mustang? im new man my bad...

Do you know the size of the s197 exhaust?

It’s a Gt x pipe it will still fit for v6??

V6 FTW

@mustangmike3396

4 жыл бұрын

Mario Borruel 🤟🏼💪🏽

This fits the V6 I thought this pipe was only for the GT

@nathant2414

3 жыл бұрын

Any GT catback will fit

which headers do you have

Stock headers in this video ?

hows the drone

On a scale of 1 to 10 how loud?

Flyby video?

mine has Flowmaster outlaw axle-back, does Sr performance x pipe fit with this exhaust?

@mustangmike3396

4 жыл бұрын

Searing Rocket it should just gonna have to do some welding or a different clamp like from AutoZone

Did the check engine light turn on after the install?

@everardocastro8498

2 жыл бұрын

It only comes on if you delete the cats

Is that a 3.7

Hi, considering doing this to my V6 but doubts about drone stops me... Any drone while on the highway with this set?

@josiahgoldsberry7121

3 жыл бұрын

It just depends on what speed you're at or if you're on an incline. But at a straight cruise it evens out. Its totally worth it you definitely won't regret it!

What x-pipe did you order? And do you have the link of where to get it?

@EBOOMIN

Жыл бұрын

i need this as well

Hehe I found Michaels KZread

I have the flow master x-pipe, more content.

@DejaVu920

2 жыл бұрын

you have any vid of the revs?

The X pipe link that you posted says for GT. Does it fit the V6?

@mustangmike3396

3 жыл бұрын

juanjoseperez777 yes with slight modifications I would recommend buying your own clamps from local part store or you can get it welded👍🏻

@juanjoseperez777

3 жыл бұрын

@@mustangmike3396 Thanks for the guidance. I just installed it and it sounds amazing. 😎😎

@mustangmike3396

3 жыл бұрын

juanjoseperez777 hell yea brotha🤟🏼 glad I could help🙏🏻

@utkarshsingh6134

3 жыл бұрын

@@juanjoseperez777 hey brother what exactly did u do to fit gt x pipe to v6

@juanjoseperez777

3 жыл бұрын

@@utkarshsingh6134 the tubes almost fit nicely. I just avoid using the clamps and went to my local muffler shop and weld them.

How did the 2.5 xpipe fit ???

@mustangmike3396

3 жыл бұрын

Gwill 947 welded it👍🏻😂

can i do this to my ecoboost and get the same sound results?

@knoxmccluster5006

3 жыл бұрын

Not exactly

@tonyhernandez8495

3 жыл бұрын

That’s a hard no eco boost won’t sound like that v6 at all my guy

Wow it sounds exactly like a 5.0 GT

@jamesversatile6338

2 жыл бұрын

I got s muffler delete, after hearing this im getting the x pipe

@DejaVu920

2 жыл бұрын

@@jamesversatile6338 you get it?

Does check engine light show up or anything affect the car?

@itz_magetv980

3 жыл бұрын

I have the same upgrades he has. The check engine light does come on or at least it did for me cuz of the missing back pressure the o2 sensors go wild. But nothing negatively affects to the performance of the car. Only gains and sound 👌👌

Does the xpipe mess with the cat at all?? I took it into the shop and they said they couldn’t do it because it messes with it. Plz answer

@DejaVu920

2 жыл бұрын

not really

that sounds like a v8 no way that’s a v6

i would see this after i bought a y pipe dammit

@itsdillon04

3 жыл бұрын

y pipe doesn’t work with a V6 only the ecoboost, however it is the only one that works with the ecoboost

FT. YOMARVS 😂

@mustangmike3396

4 жыл бұрын

Mario Borruel 😂👍🏻

No Milwaukee sawzall smh😂

@mustangmike3396

3 жыл бұрын

Armando Castro there had to be one😂😂 was waiting😂

@armandocastro5592

3 жыл бұрын

MustangMike all my tools are Milwaukee aswell 😂 and I own a 2016 v6 mustang

@mustangmike3396

3 жыл бұрын

Armando Castro damn we twinning😂

With all the money you put in in tha v6 . U could’ve bought av8