Thanks a ton for your video. I actually bought a spare tank for my vintage cushman because the previous sealer in my original tank was cracked and failing. It was the white stuff. I started with the degreaser on that one and it didnt touch the old sealer so i put a gallon of acetone in it overnight. That disolved it. Then i went to the degreaser. For the spare tank, it was dirty inside. I started with white vinegar and some nuts for aggregate and shook it all about. Then i moved onto the degreaser. Poured the metal prep from one tank to the other after soaking all sides and then drained it back into the og bottle when both tanks were done. Both are now rinsed and bone dry ready to do the paint step in the morning. Im really glad i had a heat gun, as the shape of my tank leaves some liquid in there. Anyway, thanks for the step by step. Both these tanks needed it. Surprisingly, the less rusty one is more solid than the other one that had a pinhole. I kept losing any gas i put in overnight.

@FlippinCustomized

Жыл бұрын

Glad it helped and thank you for watching

Very good video. Love the sight glass mod as well. Thanks for sharing. 👍👏👍👏

@FlippinCustomized

Жыл бұрын

Thanks for watching 🙏

Tip for anyone else watching, my tank has a port on the bottom with threads on the outside that the tillotson fuel filter screws onto. I drilled a hole into a wine cork and threaded it on to plug that hole. It worked great. My gas caps were vented so i ductaped the hole. A big plug would be ideal but my paint is going to be redone anyway, i wasnt too concerned about damaging the current paint

Thanks that was great video, it helps me on my older cars that fuel tanks are hard to find in good shape if needed. At least this process do the trick on pin holes if any and stop any from accruing.

@FlippinCustomized

Жыл бұрын

Your welcome it has worked for us on several projects

great video, about to de-rust a tank and I wasnt sure if this was worth using. now Im definitely doing this.

@FlippinCustomized

Жыл бұрын

Honestly used it several times now and had great results

I have used this product many times, and i can say it is a top product. i did one tank 10 years ago and it is still perfect.

@FlippinCustomized

6 ай бұрын

That’s great to know

I've gone through this process several times recently and it's quite tedious. It takes time and care. I'm sure that neighbors are wondering why I've been holding and spinning fuel tanks for hours on end while walking around the yard

@FlippinCustomized

Жыл бұрын

But it works well done properly

@ipman4715

Жыл бұрын

it worked on my kawasaki..

@Jonno2summit

11 ай бұрын

I'm having the same thoughts about my neighbors! LOL. Yes, it is tedious when done right, and doing it right can't be rushed. Those who rush it and do if poorly pay the price. I guess that goes for all things automotive. I used copious amounts of muriatic acid, twirling and turning, rinsing and repeating. The POR15 tank sealer should do fine as long as I don't rush the 96 hour curing period.

@mafazsiddiqui5975

6 ай бұрын

Exactly 😂😂

@davidlafranchise4782

Ай бұрын

5 minutes??? Try 20

I needed this video! 🙏

@FlippinCustomized

Жыл бұрын

Excellent glad it helped, perfect for the ATV steel tanks

Great instruction, thanks

@FlippinCustomized

Ай бұрын

Thank you

Never tryed this brand but Red kote works great for me Might try it next

@FlippinCustomized

Жыл бұрын

Have had good luck with por

Cool!

@FlippinCustomized

Жыл бұрын

tried to give a good step by step

I am compelled to wonder, is there any value in masking off the gas cap to prevent the product from interfering with the dynamics of a ventilated/breathing gas cap? Maybe use a sacrificial gas cap for the application process? Anyway, this was a well done and useful tutorial and the gratitude is flowing! Thank You, Brother!

@FlippinCustomized

Жыл бұрын

Thank you for watching 🤙

@derrickwoods2803

Жыл бұрын

Use aluminum duct tape

The product I have used for 30 years is 3M EC-776. expensive and aircraft safe.

@FlippinCustomized

Жыл бұрын

Nice I will check it out thanks

@TediBare

10 ай бұрын

Aircraft safe 😂 zooom

I welded & POR coated my tank about 3 years ago bc of a tiny leak and haven't re attached it to the bike yet. Im thinking of giving it a 2nd coat now before I put it back together. Yea or nay?

@FlippinCustomized

Жыл бұрын

Honestly I would direct that one at por directly as I’m not sure especially since it’s been 3 years

@nicolemcmullen8418

2 ай бұрын

How did you make out?

Great video!! One question..... Does it smell alot? or can I do this in my basement shop??

@FlippinCustomized

Жыл бұрын

Thank you, it was summer so had doors open but did not seem to smell to bad

I'm wanting to use it on a 1957 moped. I'm fearful that the material will reduce the inner diameter of my petcock so that I want be able to get the petcock and it's stems back in the tank. The untreated inner diameter is probably about 1/2". What are your thoughts?

@FlippinCustomized

Жыл бұрын

Can you access it to wipe that portion before it cures?

Did your kit come with the repair cloth for larger holes? I definitely dont need that, I wonder if buying the degreaser, rust stopper, and sealer seperate is cheaper.

@FlippinCustomized

Жыл бұрын

It did not, it may be a few dollars cheaper yes

@MapsAndCaps

Жыл бұрын

​@@FlippinCustomizedthanks man! I see on por15's site they sell everything separate. Perfect, I actually have 2 tanks to do so I'll get the required sizes.

Can you use muriatic acid and rubbing alcohol to prep the tank?

@FlippinCustomized

Жыл бұрын

I guess you could but that flash rust soo fast

I just noticed POR is a 10 min drive from me. They seem to have a customer store on site. I'm off in the morning to ask for their advice.

@FlippinCustomized

Жыл бұрын

They make great products for sure

Thanks for sharing. Do you think this seals small leaks?

@FlippinCustomized

5 ай бұрын

Yes

How is it holding up after a year? Got a tank that I need to coat and looking for a long lasting product.

@FlippinCustomized

9 ай бұрын

Good I also have one that’s 2 years old

Thankyou. I'm told that red coat stuff is horrendous. This product coupled with your abilities & performance looks great. Clean efficient result

@FlippinCustomized

Жыл бұрын

Thank you for the kind words, we have had great luck with the POR products

Would u recommend coating a brand new ebay gas tank has never had any fuel or anything in it

@FlippinCustomized

Жыл бұрын

Honestly wouldn’t hurt they are very thin and rust out

How much time did you spend on the final step before letting it sit to drain out? The kit's instructions did not say

@FlippinCustomized

10 ай бұрын

I rotated for a hood five minutes to ensure all surfaces were covered then drained

The black rust paint is a disaster in a can. The tank liner works great, prep is key.

@FlippinCustomized

Ай бұрын

Prep is key

what if there is bits of loose rust in the tank, how do you get that out before putting the degrease in

@FlippinCustomized

Жыл бұрын

Ensure its completely dry after washing out and I use compressed air and a shop vacuum

@CCitis

Жыл бұрын

I use a garden hose. Rinse it out… then let it dry.

Another question. I used a different sealer in a tank once, it flaked up after 10 years. How can I get it out?????? There is rust under that white sealer.

@FlippinCustomized

8 ай бұрын

10 years that’s good, try the old rocks in gas tank and shake to break it up

@it_looked_easier

Ай бұрын

belated reply, just FYI-- I used a pressure washer wand on my soda blaster and got the tank's inside really clean. Took a couple of days and 40 pounds of soda, and a narrow goose neck LED desk lamp to see inside.

if the fuel tank takes a hard hit, it can damage the insulating layer(sealer layer), which can lead to other damage to the carburetor? Is that correct or not?

@FlippinCustomized

4 ай бұрын

Never experienced that

The key is ''PATIENCE''!!

Not sure putting it out in the sun is the best way to go. I'd just leave it in the garage and wait the 4 days. Beware, when you think you've drained it all, there's still more to get out. If you think you're done and leave it sitting at a slight angle, you'll come back to find some POR pooled up in the tank, which isn't good. Set it in a position where the excess will spread out and not pool in a crevice.

@FlippinCustomized

Жыл бұрын

Correct, was put in sun after it had solidified

So how did it hold up a year later?

@FlippinCustomized

Ай бұрын

Still working great no issues

Should I rinse out with water and degreaser a virgin tank?

@FlippinCustomized

10 ай бұрын

I would yes

@TediBare

10 ай бұрын

OK here's my next question. if I can't get the thing dry and every time I go to pick it up the check it's dry more water comes out of it and I can shake it and still hear some water sloshing around. Do I have a bad tank?? Because my arms are tired as hell and I've only finished step one. Still drying it air compressor yada yada yada. I really wish I could show you a picture. Or to FaceTime 💜💜💜. I have done a lot of painting in my time, but this is the first time I've ever done the inside of a tank!! And that's why I went looking for research you don't know how many other videos I watched before I fell in love with you ... and subscribed 💜💜

@TediBare

10 ай бұрын

Remember, this is a virgin brand new tank

@TediBare

10 ай бұрын

And it's a 3.1 for a Harley sportster 883. Hopefully you know exactly what style of tank I'm talking about. And I do appreciate you educating me so much.

Whats it doing after 10 to 15 years?????

@FlippinCustomized

Жыл бұрын

Well it’s on year 2 no issues

AMIGO COMO TE FUE 1 AÑO DESPUES?

@FlippinCustomized

5 ай бұрын

Still working great no issues yet

@luis0luis058

5 ай бұрын

​@@FlippinCustomized muchas gracias lo compre cuando vi este video me acaba de llegar gracias por contestar

What is the brand?

@FlippinCustomized

Жыл бұрын

PoR

@TheCbj79

Жыл бұрын

Lol i did see it aslo. Just blind

Thanks for a fucking cool video!

@FlippinCustomized

Жыл бұрын

Glad to help 👍

Por is made by Eastwood

@FlippinCustomized

10 ай бұрын

Great product

@paulscott940

10 ай бұрын

@@FlippinCustomized Yes I’ve been looking at this to seal my tank I think it’s the best out of all the products for tank sealers 👍

Not leaking..yet just rusty

@FlippinCustomized

8 ай бұрын

No leaks

Only a year old and 480p lmao

@FlippinCustomized

3 ай бұрын

Huh

@Bee-fr7zk

3 ай бұрын

@@FlippinCustomized it says max is 480p for the video

@FlippinCustomized

3 ай бұрын

Strange it was recorded in 1080

@Bee-fr7zk

3 ай бұрын

@@FlippinCustomized weird lol

@FlippinCustomized

3 ай бұрын

Sorry I can try to re upload

Just so you know , looong lead-ins are STUPID . Get to the damned video ! Thanx

@FlippinCustomized

2 ай бұрын

K bud 🤙

@OrcOn2Wheels

2 ай бұрын

you should make a fuckin video then :)