No video
MT09 bar end install
Quick video showing you the the new TST Industries Bar Ends with silver high lights. Because we are using the Graves mirror adapter in conjunction with the TST Bar ends, I had to run up to ACE hardware to pick up some M6/80mm stainless steal Allen screws.
For all parts shown in video visit
www.tstindutries.com
Пікірлер: 43
NIce! great to see you actually ride and hear the exhaust as well!
@yamayari8351
3 жыл бұрын
Thank you! I love motorcycles ❤️ it’s in my DNA
With the stock bar ends, 80mm is too long. I'm running the mirror with the graves adapter and no bar end right now until the slider comes in. If you want to use with the stock bar end, you'll probably need 60-65mm. Best to try out it out before you run home and find out like me.
Hey man...where did you get the mirrors? I can't find them on TST industries.
Hi YamaYari love all your videos keep posting 👍. Same bike as yours and blue, I installed CRG mirrors without the weights,have yet to try it Canada 🥶 wondering if it will make a huge difference in vibration ? I also like the fact that I can move the mirrors downwards without the bar end weights mirrors add a bit. Any info would be appreciated i know it’s not a perfect science Thank you in advance
@yamayari8351
2 жыл бұрын
That is one thing I’ve considered. Because I really like the look of the mirror straight out. But with my bar ends they do make contact and do not go all the way down. But I’ve had so much bad luck Dropping bikes in the garage ha ha but I want the most protection as possible.
Great video! The Graves adapter having trouble finding those. Do you know if the r1 and r6 adapters work on the new MT? I think you said you had those on a previous bike. Thanks bro for the content and ideas.
@yamayari8351
2 жыл бұрын
Yes. I ordered the 2018 R1 bar end graves adapters. Fit perfectly fine. They work for the R6, R1, an the new 2021 MT09
@yamayari8351
2 жыл бұрын
Thank you 🙏
Need to get M6-60mm socket head screws, the ones that come in the graves adapter are way too short.
@yamayari8351
2 жыл бұрын
Your absolutely right. Thank you for watching the Channel 🙏
@themystx2
2 жыл бұрын
@@yamayari8351 thanks for being the best source of gen3 MT09 installation videos!
@yamayari8351
2 жыл бұрын
@@themystx2 wow 🙏❤️ man I appreciate you saying that. Means a lot. I really try my best with what I have. Between two jobs, kids and my passion for motorcycles and bikes it can be a lot at times on my plate. But with subscribers like you and many others it truly makes it worth my time. Thank you 🙏
So you needed an 80mm bolt for the wometech bar ends with the graves adapters, what size bolt did you need for the graves adapters and the STOCK bar ends?
@yamayari8351
2 жыл бұрын
I’m sure if I used the stock bar I DS would have been ruffly the same. The Wometech bar ends are the same size as the stock ones. Just look nicer. Thank you for watching the channel 🙏
@lukataggert8616
2 жыл бұрын
@@yamayari8351 No worries thanks mate! I heard that inside the mt09's bar beyond the threaded point it's just hollow anyway so you can kind of just use a needlessly long bolt anyway if you need to so I may just do that
What brand off mirrors are you using? And do they vibrate? Thnx and love your video's
@yamayari8351
2 жыл бұрын
Thank you 🙏 I have a video posted on my MT09 playlist. They are CRG arrow mirrors and no vibration 🙏🙌
@badgrumpy_mt0966
2 жыл бұрын
@@yamayari8351 thank you i wil check it out 😁
Hey man! Where did you buy the cover for where the oem mirrors sit?
@yamayari8351
Жыл бұрын
Amazon for like 6 bucks.
can you send me the links of the product and does this fit on mt09 2020
@yamayari8351
Жыл бұрын
tstindustries.com/yamaha-fz-09-mt-09-2017-2020/
will this work on a 22 MT07?
Do you think a 100mm would work instead of the 80? Everywhere around me so far hasn’t had them in stock.
@yamayari8351
2 жыл бұрын
Yes I believe so. There was still plenty of room for sure. Thank you for watching the Channel. Means a lot and good luck 🙏
Could you leave the color ring out and mount the mirror in that space?
@yamayari8351
Жыл бұрын
No. But they have a black one I believe.
Did you used m6/80mm for both end bar?
@yamayari8351
2 жыл бұрын
Yes. I had one already and bought another at Ace Hardware.
14:09 bro wht was tht flying streak of light there bro??? no clue here but it kinda look like spirit!!!
@yamayari8351
3 жыл бұрын
What? Really? What minute or seconds in the video? Time stamp?
@Taitea_____
3 жыл бұрын
@@yamayari8351 14:08 to :09 just above them handlebars, it came with the exact same time me u put the screw on the table
@yamayari8351
3 жыл бұрын
@@Taitea_____ that was the moon 🌙 looks orange here in the summer. But I’ll believe it’s God blessings me ❤️
Hello ... where did you buy them ...
@yamayari8351
3 жыл бұрын
Www.tstindustries.com
Bro can you do me a huge favor and link me the graves bar end adapter you used?
@yamayari8351
2 жыл бұрын
This exact link will work. Says 2018 yamaha R1 it will work. You will need quantity of 2 www.cyclegear.com/parts/graves-bar-end-mirror-adapter-r1-r6?sku_id=998325
Just got my MT09 SP 2 weeks ago! Could you share the direct link for the wometech bar end mirror adapter please?
@yamayari8351
Жыл бұрын
I used the Grave Bar end adapters from a 2018 R1, same fitment. Not the Wometech, link should be in the comments and description’s. Thank you for watching. Ride safe.
@christianmoi3345
Жыл бұрын
@@yamayari8351 thank you so much for replying
@christianmoi3345
Жыл бұрын
@YamaYari I just installed the Graves bar end adapter with the oem bar end. Just like in your video, I bought the 70mm screws and the fit perfectly. Please keep making those helpful videos and be safe; you gotta go to work on Monday....Lol!
@yamayari8351
Жыл бұрын
@@christianmoi3345 nice!!!!! Glad it worked! I’m a get back on track with the videos. Ride safe.