No video

MR2 SW20 N/A Sound

goo.gl/JbEMFP - Mounted the cam on the outside near the engine bay - so you can clearly hear everything from the engine.
especially the sound of the air filter when engaging
My car on motofreax.com: www.motofreax.c...

Пікірлер: 27

  • @CondoreComputing
    @CondoreComputing9 жыл бұрын

    I have a 91 NA sw20 completely stock and i love the way it sound's

  • @MadBiker77
    @MadBiker7711 жыл бұрын

    ACiS - Acoustic Controlled intake system . thats what is on the 3SGE. smooths the intake power. the later engines had VVTi either single or dual. the best ones were the Beams 3SGE engines. with infinitely variable valve timing

  • @innercitysum0
    @innercitysum011 жыл бұрын

    I used to have a stock 1995 SW20, did 190,000 miles before the gear box ate itself. Great days......great car.

  • @ianedmonds9191

    @ianedmonds9191

    4 жыл бұрын

    They just run and run. Unfortunately the bodies and especially the sills don't share the same staying power. My MR2 would start and run wonderfully at 140,000 miles. Everytime. Sills were dust. Had to sell it. I miss that car so much. Luv and Peace.

  • @snookermen

    @snookermen

    3 жыл бұрын

    My sills are pretty crusty too... 🤒

  • @LRGUE
    @LRGUE10 жыл бұрын

    It uses the ACIS (Acoustic Control Induction System),

  • @reitinet
    @reitinet12 жыл бұрын

    @dayidie2 hehe, yea, busses are one of the faster drivers over here - normaly they start quite nice overtaking manouvers, when there are some slow tourists in frontz of them - it's always good to have an bus in front of you (they "clean" the corners) haha. on the other side - it could give you sort of adrenalin, if a bus is approaching around a corner - because some corners are a little bit narrow :-)

  • @PRZJ91
    @PRZJ9110 жыл бұрын

    butterfly system in the intake manifold. the integra gsr has the butterflies as well

  • @reitinet
    @reitinet11 жыл бұрын

    Actually the MR2 N/A has a flap system in the intake manifold, which switches at 5000 rpm - that's what you hear. I am not sure how to call that in english :-)

  • @ianedmonds9191

    @ianedmonds9191

    4 жыл бұрын

    I think it's 5400 rpm. At least on the rev 3.

  • @reitinet
    @reitinet13 жыл бұрын

    @camcam137 I used a GoPro Hero HD - mounted with suction cup at the outside of the backwindow

  • @punchme9ibleed
    @punchme9ibleed11 жыл бұрын

    awesome sound! are you using the stock exhaust system and intake?

  • @tokusan-works
    @tokusan-works4 жыл бұрын

    Good sound.

  • @reitinet
    @reitinet12 жыл бұрын

    @dayidie2 yeas, that's Gran Canaria, I live there

  • @90beastmaster
    @90beastmaster11 жыл бұрын

    Toyota has their VVTi similar to VTEC.

  • @TrendieMan
    @TrendieMan13 жыл бұрын

    what type of camera was used and how did you attach it?

  • @ianedmonds9191
    @ianedmonds91914 жыл бұрын

    Is that a K+N conefilter on there?

  • @reitinet

    @reitinet

    4 жыл бұрын

    It's an open air filter inside an airbox - not K&N but similar

  • @Olisam1524
    @Olisam152411 жыл бұрын

    I could of swear that you engine sounds like hitting VTEC

  • @CubaKid94
    @CubaKid9410 жыл бұрын

    What kind of camera did you use?

  • @reitinet

    @reitinet

    10 жыл бұрын

    GoPro Hero HD was used (the first HD Generation)

  • @CubaKid94

    @CubaKid94

    10 жыл бұрын

    wow...the GoPro HD Hero1?? Wow. It looks great. Im gonna go pick one up

  • @reitinet

    @reitinet

    10 жыл бұрын

    Not sure, if you can still get the old ones. I recently got myself a Hero 3 :-) Look at my latest motorbike vid, to see it

  • @CubaKid94
    @CubaKid9410 жыл бұрын

    and what did you mount it with?

  • @reitinet

    @reitinet

    10 жыл бұрын

    The cam was mounted on the back window (outside) with the GoPro Suction Cup

  • @melekiaz4680
    @melekiaz468010 жыл бұрын

    3sge engine