MOTOES PIPE REVIEW - SHERCO 300 SE
Автокөліктер мен көлік құралдары
Trying out the Motoes handmade expansion chamber & bash plate on my 2021 Sherco 300 SE. Quality & appearance is awesome.
These pipes fit all 250 & 300 2T models from 2019 onwards.
Seems like a decent extra 'Hit''to the mid range & top-end power & does not seem to have lost any of the low-down Sherco torque = Win, win!
You can find them in Australia at The RPM Factory - / rpmfactorymelbourne
or at Motoes Powerparts (Turkey) www.motoes.net/sherco-powerparts
Пікірлер: 20
Perfect timing, I'm looking at pipes right now. Finally a bash plate that you can leave on while doing a service on and not spills oil everywhere!
I super like watching your videos and I really like how you explain when you add equipment on your bike and when the commentary and explaining things while you ride the bike 🙂 Keep up the great videos.
@Danger_mouse
Жыл бұрын
Thanks very much for feedback. Really appreciate it and makes the vids worth doing. Take care 👍
Awesome manifold. I would stick it on my display shelf in my sitting room for a few months before I installed it so that I could admire it. Bike looks like its running quicker than molasses in the midday sun now.
How's it holding up with dings ect
Well I've just ordered one, cheers. How do they hold up to log bashings? I don't have any guards other than the AXP bash plate, wondering if I should protect this one? If it's anything like the factory one, it will be bent on the first ride. Thoughts?
@Danger_mouse
Жыл бұрын
I have small dents already. Certainly lightly built and not sure what guards you can run with them. I'm running mine nude and trying hard to not bash it 🙂👌
Hi there I have a 23 300se factory & I was wondering where did you buy your unbreakable levers from & what brand are they. I noticed you had them fitted in your “first ride” video. Cheers Andrew.
@Danger_mouse
Жыл бұрын
Hi Andrew, Thanks for checking out the video. The levers are Sunline folding levers and they're pretty hard to come by, unfortunately. Fly Racing was reproducing them as their Tri Fold lever, however, I think they've also stopped producing them 😔 A victim of their own success, they sell a set and never sell a replacement as they never break! This set has been on 3 x bikes now. If you are searching, most KTM models with Brembo clutch and brake cylinders will fit
@andrewelliott9228
Жыл бұрын
@@Danger_mouse thanks for letting me know. I’ll do some investigating & see what I can come up with 👍 I really enjoy watching your videos, no nonsense & very informative.
@Danger_mouse
Жыл бұрын
@@andrewelliott9228 Thanks mate. Appreciate the feedback 👍
Nice! Where's the graphics from mate? Been looking for some that don't like sh*t for ages!
@Danger_mouse
Жыл бұрын
Cheers mate. I got them from Scrubs Designz. You can request your own changes as you order (I put my own favourite brand names on my set) scrubdesignz.com/en/graphics-kit/
Favorite bike!
I presume the “lobster back” design would make the expansion chamber tougher and less prone to denting?
@Danger_mouse
Жыл бұрын
Hey mate, It's just another way to make a pipe, and was typically more expensive. It is fairly light material and I'm not running the carbon guard, so I have a couple of small dents underneath from a recent technical rocky creek ride
How’s that pipe holding up? Turn brown?
@Danger_mouse
Жыл бұрын
Hi, pipe is holding up well. The only colour change is from the head near the head pipe. One thing to be aware of is that they used thinner material which makes it nice and light, however, it does dent easier that the stock pipe.
What action camera are you using bro
@Danger_mouse
10 ай бұрын
Hi, sorry for not getting back to your comment. I'm running the DJI Action 3. I'm really happy with it and glad to be free of the Gopro life. I was tired of the constant freezing and resets.