Waiting the output results😍❤

@davidkrocks

3 жыл бұрын

Me too!

Something interesting about the single filament 3.0s, they've used this chip design before. I had a F2 XB fog light fail on me, and when I took the unit apart, the LED chip that I found in it is the same design as the 3.0 single filaments have, the only difference being the fog light chips had two emitters, while the 3.0s have four emitters on the chip. Really disappointed with the fact that they are still running the ZES chips in the dual filament bulbs though. I run 2.0s in my 96 F250, and for me personally, the advantages of switching to the 3.0s, if any, seem very minimal. Unless they significantly cranked up the output on the 9004/9007 bulbs and the lens-defrosting effect proves to be true, it unfortunately looks like I'll be sitting this new release out. :(

@LightwerkzGlobal

3 жыл бұрын

We'll try to do comparisons against the 2.0 dual filament options.

@jesusfeathers3477

3 жыл бұрын

@@LightwerkzGlobal Awesome!

Expected to see some output shots!

@LightwerkzGlobal

3 жыл бұрын

You'll be seeing them coming out through the week on our social media!

Hope a brand like Morimoto/Osram will eventually make a quality D1S option.

@LightwerkzGlobal

3 жыл бұрын

They wont because it will never be a viable replacement option to OEM HID bulbs.

@zafarmahmood8410

3 жыл бұрын

@@LightwerkzGlobal is this due to the type of projector used for hid bulbs ? Will the light output be comprised of used in the wrong projector?

@zafarmahmood8410

3 жыл бұрын

Compromised

@LightwerkzGlobal

3 жыл бұрын

@@zafarmahmood8410 We've tested many LED bulbs over the years and every time they are used in an OEM HID projector the results show a loss of performance. The projector is optimized for HID bulb, which is also much brighter. In the case of halogen projector, we see an increase in performance. There are plenty of generic lower quality LED bulbs on the market that are made in these sizes, but you never see it from the top manufacturers simply because they know its not realistic to have a viable replacement option.

In any bulb review, you need to have output results vs the older bulbs.

@LightwerkzGlobal

3 жыл бұрын

Check on our social media, we put out various comparisons already. The 2Stroke 2.0 is old news now, but we do compare against current market leaders.

nice

Tienen largo alcance en las carrteras?? es que viajo mucho por las noches, me pueden ayudar por favor. Saludos desde República Dominicana

Are these brighter in a reflector headlight for a Silverado vs the SV4's?

@rmp5841

3 жыл бұрын

My main concern is the Morimoto 2 stroke 3.0 with H13 dual filament still uses the older Philips Lumileds Luxeon Z ES chip technology which produce only 1.860 peak lumens when compared to the S-V.4 LED kit in H13 dual filament that produce 3600 lumens with much higher light output. Therefore, which would you recommend would provide the highest light output and better beam pattern in a reflector housing?

Do you still need a PWM capacitor link if your vehicle has DRLs? It’s for a Subaru Ascent

@Imperial-simp_destroyer

2 жыл бұрын

Iv been trying to find an answer with my 2019 base impreza 🙄 no solid answers anywhere kinda ridiculous tbh as if no info exists at all

Does that black housing screw off like the gen 2 ? It’s a terrible design because when turning the bulb into the housing, it comes off.

@LightwerkzGlobal

3 жыл бұрын

The base is removable.

Is this high beam and Low beam?

@LightwerkzGlobal

3 жыл бұрын

Dual filament options are offered in H13, H4, and 9007 - lightwerkz.net/collections/2stroke

I meant the MORIMOTO 2STROKE 3.0

Can I have the 9006 bulb lol

The reflector doesn't shoot the light up it shoots it down to light the road not the air.

@LightwerkzGlobal

3 жыл бұрын

Sorry for any misunderstanding. The mention regarding the mini reflector on the LED bulb, it is setup to put the light directly above the LED bulb,. to make more use of the factory reflector bowl.

@Auto1383

3 жыл бұрын

@@LightwerkzGlobal No to put the light below the led. The mini reflector faces down not up when installed properly

@LightwerkzGlobal

3 жыл бұрын

@@Auto1383 Thats incorrect. Check out the picture in the product listing to see how it works - lightwerkz.net/collections/2stroke/products/h4-morimoto-2stroke-3-0

@Auto1383

3 жыл бұрын

@@LightwerkzGlobal I have, if you read the description it is to focus more light on the road, which is down not up. Read the info on the picture of the shade cup. And it's called a shade cup, not a light reflector.

@LightwerkzGlobal

3 жыл бұрын

@@Auto1383 I think we must be misunderstanding one another. Thats alright! The Shade Cup aka Micro Optical Reflector aka Reflector on the LED bulb puts the light directly above the bulb unlike other designs on the market. This makes the car's reflector more efficient. I suppose we both know that though as we understand the design.