I have a gladiator with the 2 inch lift and 35 inch BFG KO2s. Its great!

Looks good. I had my dealer add the Mopar lift. A few days later I put an adjustable track bar on because it shifted the axle about an inch to the left. Rides great.

@messinwithmr.wilson6678

3 жыл бұрын

Yeah it's always a good idea to try and do something with the track bar when you lift them.

Very nice!

On my lift kit which is a Mopar it had instructions for which spring is to go where listed by part number.

I have Rubicon fenders on my Sport S. May I go with 37" wheels?

Looking to lift my gladiator. Are there any more parts to purchase other than front adjustable track bar and Mopar lift kit?

Can someone help me figure this out? I have an ecodiesel sport. Installed mopar lift kit specific for ecodiesel and it only gave me 2" while everyone else is getting 3" and 3.5", I wonder why?

Thanks for putting this video. This blue Gladiator looks great. I’m putting a Mopar 2” lift with the adjustable track bar on 37” Nitto Ridge Grappler and AEV Savegre II wheels. Is a regear absolutely necessary? And, should I do it at the same time of the lifting?

@messinwithmr.wilson6678

3 жыл бұрын

I would say it depends on what you want to do with it. If you planned on doing a lot of off roading I would think about regearing it. You dont have to do it the same time. You can lift it and drive it for a little bit and then decide for your self if you want regear.

Did you just say even part numbers go on the driver side and odd number on the passenger side ???? I installed my Mopar lift last week. Following all “Mopar directions “ and the front springs are bowing inward. It’s on my 22 JLU diesel. I’ve removed them 3 times now to check why !!! Driving me crazy !!! Please chime in.

Hey how much dose it cost to install this lift kit great video btw

I see you replaced the control arms first. I've watched vids of people struggling with them is it easier to do them first?

@messinwithmr.wilson6678

3 жыл бұрын

The best way is to only remove one at a time. I had a large pry bar I used to rotate the axle. But if you don't have one I have used a ratchet strap around the lower side of the knuckle and pulled toward the front.

Hey awesome video, I have a question what size tire and rim can you fit with this lift? I bought a 21 jeep gladiator already lifted and not sure what size lift or brand lift it has ? I’m guessing it’s this one but not sure. It has fox shocks all around and has 22” rims and 37” mud tires on it would that fit on a 2” lift? The dealership I bought it from didn’t know what size lift or anything salesmen didn’t know much lol

@messinwithmr.wilson6678

2 жыл бұрын

It will fit on the mopar 2in lift

i heard the blue Willy had 35X12.50's on but what is the rim size and diameter? I have a Willy edition Gladiator and that stance is perfect.

@messinwithmr.wilson6678

3 жыл бұрын

17in rims

@messinwithmr.wilson6678

3 жыл бұрын

Dont remember width or backspacing. sorry

Thanks for the vid! I bought a used gladiator rubicon and was told it was lifted at the dealership. How can I tell by looking if it was a mopar dealership lift? It has 37s on it.

@messinwithmr.wilson6678

2 жыл бұрын

All the mopar lifts use fox shocks. And the front lower control will still be a square tube. Most aftermarket lifts will use a round lower control arm.

I know it depends a lot on the tire size, and type of tire. But does the 2" lift kit make the ride a lot harsher then stock? Thanks for the video!

@gooninaround6316

Жыл бұрын

not with a 2 inch lift

What all steering/stabilizer parts should be upgraded when going stock height and tires to lift and 37s?

@messinwithmr.wilson6678

3 жыл бұрын

If your lift kit did not come with a track bar drop I do that. And I would maybe think about a good name brand steering damper kit.

@motorhead_jt21

3 жыл бұрын

@@messinwithmr.wilson6678 Thanks for the info!

Question I'm getting ready to get a Mopar 2" lift on my 2021 Gladiator Rubicon, and I was thinking on also putting a 3/4" front leveling kit, someone told me that the leveling kits will mess up your front end is that true?

@messinwithmr.wilson6678

2 жыл бұрын

I would do just the mopar lift. It will level out the stance enough in my opinion.

@ROADWARRIOR21

2 жыл бұрын

@@messinwithmr.wilson6678 thanks

So how does rear gets proper caster angle without control arms ?

@messinwithmr.wilson6678

3 жыл бұрын

lift is not large enough to effect the rear that much.

@artishuk

3 жыл бұрын

@@messinwithmr.wilson6678 appreciated

I was wondering what it would look like without tires

What is a fair price to install the mopar lift? Thanks for sharing

@messinwithmr.wilson6678

3 жыл бұрын

I would say most shops would probaly charge around 6-8 hours to install the lift kit. I believe the lift kit retails around $1500 from the dealer.

@lyudmilatarusova

Жыл бұрын

The kit is now almost 2k.

Bro, why didn't you show a step by step closer view on how you disassembled the old equipment and reassembled the new equipment? Can't see a darn thing with your camera in the front of the vehicle long distance, and the vehicle is dark and with back lighting.

@messinwithmr.wilson6678

3 жыл бұрын

Sorry I did not go into more detail but I did this video at work and get paid flat rate. I did not have a lot of time to go into every detail. Just wanted to give a brief overview.

Bro, why didn't you show a step by step closer view on how you disassembled the old equipment and reassembled the new equipment? Can't see a darn thing with your camera in the front of the vehicle long distance, and the vehicle is dark and with back lighting.