I find you can cut a backing patch that you can concert into the hole then you can use a T pin to hold the patch up against the hole. using the heating iron,the ultracoat will stick to the patch just as it sticks to the ribs of the plane or body when you do the body. heating activates the glue in the monocoat. A patch can be a very thin piece of plywood, balsa wood or even a piece of monocoat its self. I have used a thin layer of superglue to tack the patch to the inside of the hole,carefully pullor manipulate the torn pieces back together and run a thin layer of superglue over the edges. You can add an additional patch of monocoat over the spot if you want but unless it looks bad,I dont bother.

Really nice tutorial! Thanks for sharing.

Wizardry made easy brother! Love the video!!

My plane's Wings has very similar demage. I will try to repair as you do. Thanks for sharing

Thank you for sharing!! Great video!!

What temp are your irons?

I see that P-51 in the corner !!🇺🇸

@FieldSketch1

5 жыл бұрын

Yep!