MOJITO! Jeep Wrangler 392 Build Details ** CUSTOM PAINTED World's First
Автокөліктер мен көлік құралдары
Our channel found its direction back in 2018 when we purchased our first Jeep Wrangler JL Rubicon in the gorgeous Mojito Green color. Since then a lot has changed, but the Mojito Jeep has brought us head first in to the Jeep life. Kim said she would never sell the original Mojito Jeep unless I figured out a way to make a Mojito Wrangler 392 to replace it! So of course I made some calls and made it happen!
Special thanks to @scottcarterstudios8665 for help with drone/video footage.
Big shoutouts to Greg, Corey, Tom, and Karl for all of their help taking this Jeep apart to get it ready for paint. And big shoutout to Katalin's Customs for doing an amazing job with the new paint!
Follow us on Instagram:
/ shockerracinggarage
linktr.ee/shockerracing
Build Sponsors:
Clayton Off-Road: www.claytonoffroad.com
Teraflex: www.teraflex.com
Ultimate 9: www.ultimate9.co
H3R Performance: www.h3rperfomance.com
Topsy Products: www.topsyproducts.com
Advanced Cerakote: @advancedCerakote
Other Products we love, support our channel by shopping our favorite Jeep/Bronco Products on Amazon:
www.amazon.com/shop/shockerra...
* Teraflex Nomad Wheels: amzn.to/32Iphn2
* Teraflex wheel spacers on Amazon: amzn.to/2UBK4Kd
* MATCC 18 Piece Panel Removal Kit on Amazon: amzn.to/2LKnBlH
* Diode Dynamics side markers from Amazon here: amzn.to/2Ltap8p
* Diode Dynamics cowl brackets and 6" lightbars on Amazon: amzn.to/2UzLW1t
* Diode Dynamics Rear Lightbar from Amazon here: amzn.to/2XDMBn4
* Diode Dynamics 30" Grill Brackets and Lightbars here on Amazon: amzn.to/2WoEkjm
* Vvivid Shield: amzn.to/2zZNtVD
* 3m 1080 Highlighter Yellow Wrap(Small Roll): amzn.to/2zWfZYv
* 13" Shorty Antenna: amzn.to/2qb2EXn
* Weathertech Floormats: amzn.to/2KBNOnM
* Racor Cable Lifted Storage Rack: amzn.to/2Q0aApa
* Rugged Rudge Dash Multi Mount 13551.23: amzn.to/2TcVBe1
Bronco Rear Hatch/Cargo Light Video: • Bronco Rear Hatch & Ca...
- LE-JX LED Lights: amzn.to/30Hw7h8
- 3M Double Sided Tape: amzn.to/3DEIOYr
- Switch: amzn.to/3FwhAUs
- Solder Seal Connectors: amzn.to/3DEErfY
- Wire Connector Kit: amzn.to/3DFffWC
- Step Bits: amzn.to/2Z5Z6dR
- Exhaust Removal Tool on Amazon: amzn.to/3ri2623
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them.
#MojitoJeep #JeepWrangler #MojitoJeep392
Пікірлер: 39
Wowwwwwwwwwwwwwwww beautiful beautiful
Awesome 🎉
Beautiful Jeep, I wish I could afford fueling up the 8 cylinder here in the Netherlands 🤪👍
Looks awesome!
@shockerracing
Жыл бұрын
Thank you!
Awesome 👍👍. Looks really good
@shockerracing
Жыл бұрын
Thank you!
Yeah buddy!
If you haven’t got the rubbing issues resolved get some TeraFlex half inch spacers they work awesome that’s how I’ve always leveled out my jeep, I’m assuming a half inch spacer on top of your spring in the rear will do wonders for you, I use them to level out my jeep mostly in the front but I’ve also use them in the rear, the problem with these lift kits for the 392 is because we have the standard 392 and the extreme recon, some of these lift kits they’re using the diesel springs for the front, I am going with Rockcrawler either 4 1/2 inch or 3 1/2 inch haven’t decided yet but I have their 4 1/2 inch lift on mine 2018 jeep JL and running 39 inch tires and running 1 inch spacer on top of my 4 1/2 inch springs and I have zero rubbing , And that amount of spacer is not much it doesn’t affect really much of anything in regards to performance, also I recommend if you don’t have it new spring perch, rock crawler has them gets rid of all the bow in the springs and works wonders adds a little bit of extra height. Kudos to you on your jeep, have to give you credit all the work that you done just to get that repainted, I can only imagine the cost involved, you should be very proud it turned out beautiful👍
@shockerracing
Жыл бұрын
Thank you! I was thinking about a spring spacer or wheel spacers. I think some extra negative offset would help as well. Mine are only -12.
@jonluchessi1643
Жыл бұрын
the TeraFlex half inch Half inch spacers they stack on each other I also recommend the spring correction perch for the bottom of the springs and as the vehicle gets a little bit taller if your shocks are adjustable on the front or rear when needed tighten up compression dampening, so far found the rock crawler springs works very well on these taller lifts because they have three progressive spring rates which works very well and then adding the spacer or spacers to get the height you want, adjustable shocks you’re able to get rid of front end dive stinkbug I run my FOX 3.0 shocks on the front tighten up the compression damping and I leave The rear softer, gives a great ride and then when I go off road back out the compression damping But with your experience I’m sure you’re aware of all this, you have the best looking garage, I love that floor👍
Good Job nice unit ... please send the link for the SR hoodie in 4xl .
@shockerracing
Жыл бұрын
Here’s the link to the store, I’ll have to see about getting some 4xl’s in stock: shockerracing.square.site/product/neonhoodie/41?cs=true&cst=custom
Mojito 2.0 is looking awesome! Love that color! Also miss Silver Lake, hope to go back next year or so but time will tell haha.
@shockerracing
Жыл бұрын
Thank you! Yeah Silver Lake is always a blast. We try to get out there at least once a year.
@classicrocker81
Жыл бұрын
@@shockerracing I was lucky enough to be able to visit for the first time last year but being im in Idaho its quite a long ways to travel.
WHY Jeep didn't do this color for the 392 factory is beyond me!
@shockerracing
5 ай бұрын
Agreed!
Try moving that washer reservoir to in the cabin!
@shockerracing
Жыл бұрын
Then what, give Kim a straw so she can drink it direct? 😂
I totally dig those fenders. I was on the fence about getting the metal cloaks but seeing them painted w/ black tube, sold me.
@shockerracing
Жыл бұрын
Thanks man!
Nice. Road armour does bumpers with license mount. Short, mid and full width etc
@shockerracing
Жыл бұрын
Oh I forgot about them, I’ll have to check them out.
Love the sound and big fan of the Bullet point mounting system! Looks great guys.
@shockerracing
Жыл бұрын
Thank you!
Looks good! Awesome job
@shockerracing
Жыл бұрын
Thanks dude! Always appreciate your help with the videos/photos!
👍
What was the original factory color of your 392? Sting Grey? How did you handle the engine bay regarding the re-paint?
@shockerracing
Жыл бұрын
It was a black truck to start, and we just picked a nice line in the engine bay. You can see more here: kzread.info/dash/bejne/iGikrJhraLbAabA.html
@leewinter28
Жыл бұрын
@@shockerracing Thanks! I’m going to have my 392 painted a metallic copper. You inspired me for sure!
@leewinter28
Жыл бұрын
Did you choose black because it’s the best color to leave the engine bay once you change the color? If you have time at some point I would like to talk with you regarding anything you came across that is critical while disassembling your 392 to prep it for the color change. I know it’s a pretty extensive process. Thanks.
@shockerracing
Жыл бұрын
@@leewinter28 yeah the black is perfect because your wheel wells and engine bay are all black and just blend in.
Where did you get that cool flag whip?
@shockerracing
Жыл бұрын
Duneland sells them right at the entrance to the dunes.
Nice upgrade! Where is this... Michigan City?
@shockerracing
Жыл бұрын
Mears, MI
@eddiechi1
Жыл бұрын
@@shockerracing Looks awesum, never been up that far on the lake... ya had a couple great days last week to enjoy the new toy on the dunes before the snow comith