Great mixer! I hace the full x32 and it works like a charm!

thanks, once again Bob, for doing the voodoo that you do to make is sound like we do

@stageleftaudio

Жыл бұрын

Thank you Dennis! You guys make my job easy!

Nice video, great job and interesting insights. Thank you for this video. How did you like the EV PA? I just had a band to mix with the same speakers and I was really blown away.

@stageleftaudio

Жыл бұрын

Thanks for your comment. EV has some good lines of speakers. From my involvement with the speakers on this gig, they did very well. Though, I do not know what (or if) any DSP was set on the cabinets. There are a few bands that I have mixed for that all use EV powered cabinets (not sure of the lines), they all have done well.

@johnmcquay82

Жыл бұрын

@@stageleftaudio I use all EV Cabinets for front of house. For the smaller events, I use the ELX-200-12 tops with the ELX-200-18S Subs, and they perform exceptionally well. At the lower end of the product line (ZLX, ELX) the powered versions are okay, but the amplifiers within the speakers let them down... The passive versions are much much better. In combination with a good amplifier, they really are exceptional speakers for the money. I particularly like the 18S for their transient response; they reach the lows beautifully, but if you want a sub with a good amount of punch, they punch really well too.

@stageleftaudio

Жыл бұрын

Thanks for the info!

Great content as usual. Just want to ask , how do we know on these digital mixers what channel is "too hot " ie clipping as there seems to have no individual view or metre per channel? Sorry for asking as I have never yet used one.

@dustinthiessen

Жыл бұрын

there's metres above each fader, also there's a metres screen which would give you an overview of all the ins and outs of the console. At least on tis console anyway. Most digital desks would be similar.

@rayetoile1720

Жыл бұрын

Thanks for your reply.

Oh.. I can't wait for the x32 vs presonus video.. just saying

@rayetoile1720

Жыл бұрын

Just about to ask for that as well!

@alexanderv.753

11 ай бұрын

Unfortunately X32 is more powerful. I'm having Presonus 16.0.2 and 1642 and like the interface of it, but no motorized faders, no matrixes etc. a lot of things these old Studiolive has no! The main reason to switch to x32 because a lot of bands uses it and have their prepared presets I think.

@djrickysmith

11 ай бұрын

@@alexanderv.753 I use both boards .. not sure what you mean about the motorized fader's on the presonus board.. Both have them

Hi Stageleftaudio what happen to software and a tablet when moving to check sound..??????

@stageleftaudio

Жыл бұрын

Hello. Those items were not available. The system belongs to the facility.

Hey thanks for the videos. Why feed the sub from the matrix since the X32 has a dedicated sub/mono send ?

@stageleftaudio

Жыл бұрын

Thanks for the comment. I'm not sure why... it was the house system and I work with what is available.

@alexanderv.753

11 ай бұрын

What is difference than?

@stageleftaudio

11 ай бұрын

It sometimes involves how a sub-out is managed.

Get yourself a Midas Hub 4 and run that to stage via AES50 for IEMs. This way stage control their own mixes via Midas DP48 personal mixers.

👍✅

i have a question about subs, do you recommend aux fed subs or just main outs to crossover

@stageleftaudio

Жыл бұрын

I can't recommend what to use; there are a lot of variables involved. Though without a doubt, main outs to a crossover. Even using the built-in internal crossovers on some powered speakers is a great choice. Using external crossovers (digital ones like the dbx260) offer great control over the xover frequencies.

@Ahla-et

Жыл бұрын

@@stageleftaudio do you mind sharing what your settings are on your driverack?

@stageleftaudio

Жыл бұрын

Sure. Though, this is a generalized setting; it really depends on which subs I'm using and how loud the event needs to be. All of our events are run in mono using a DBX Driverack 260. Most everything we do is bi-amped (Low with mid/high output) Low Out: HPF usually @35hz using a BW 24db slope Low Out: LPF usually @110hz using a LR 24db slope Mid/high: HPF usually @110hz using a LR 24db slope Mid/high: LPF : N/A

how is the turbosound monitor?

@stageleftaudio

Жыл бұрын

I'm not sure. I was not on stage during the performances. The band members said they were ok.

I just watched your video on Do not use fader unity to set gain. What's going on here?

@stageleftaudio

10 ай бұрын

Sorry, what's the question?

What is your favorite console?

@stageleftaudio

Жыл бұрын

Of the digital consoles I have mixed on and the ones we use for production, it would be the Presonus Studiolive Series 3 (32 / 32S). Next would be the A&H SQ and QU consoles. In my opinion, the Presonus consoles provide an excellent work-flow. Though, all consoles have their strengths and weaknesses. Some consoles work better for certain events than others.

@alexanderv.753

11 ай бұрын

@@stageleftaudio Why you didn't mention Midas M32?

@stageleftaudio

11 ай бұрын

For our production work, the Midas (Behringer) products do not have an efficient work-flow.

Assigné un tb pour parler au musicien 😅😅

@stageleftaudio

Жыл бұрын

Oui, un tb aurait bien fonctionné ! J'aimerais qu'ils en aient un de disponible.

@cyrildetourcoing

Жыл бұрын

@@stageleftaudio sur la x32 t'as un micro intégré talk à et b. Mon A sert pour les wedge mon B in are guitare

@stageleftaudio

Жыл бұрын

Merci pour la réponse. Je me souviens avoir vu un certain type de micro intégré, mais la salle était si bruyante, je doute que le micro aurait ajouté beaucoup ! Parfois, il est plus simple de crier dans les deux sens, mais pour les grands événements, nous utilisons nos propres systèmes d'interphone avec casque.