Mitsubishi Pajero MK2 2.8 4m40 glow plug and door handle repairs
Swapping out glow plugs and a broken door handle on my mitsubishi pajero mk2.
Жүктеу.....
Пікірлер: 24
@mdirtydogg3 ай бұрын
Quite a helpful video and a nice looking Pajero. Thank you.
@StevenRobertTaylor
3 ай бұрын
Hi, thanks! Yeh they don't make them like this anymore that's for sure.
@mdirtydogg
3 ай бұрын
@@StevenRobertTaylor, Absolutely. Everywhere we see, we see electronic wonders. Please do consider putting up more videos as you do repairs on this vehicle. It will help people like me a lot. Thanks again.
@StevenRobertTaylor
3 ай бұрын
@@mdirtydogg Yeh, I recorded one to upload where I did the timing chain and a service. It should be uploaded soon. Thanks for watching.
@spacer5677 ай бұрын
same glow plug problem as mine just spent £2500 have all sills and floor welded on mine and rust treated this is my 4th one
@StevenRobertTaylor
7 ай бұрын
I know the feeling, I've put afew more plugs in since that video and have now got a set of NGK CZ256 to go in. Have done a video of all the welding I did aswell if you're interested in that. Thanks for watching!
@karrar185 Жыл бұрын
Beautfiul car
@StevenRobertTaylor
Жыл бұрын
Thanks! Nice to keep these old cars on the road. Have another video coming up of all the welding I had to do to get it through its annual inspection.
@eoinds Жыл бұрын
Hey Steve, great vid, just started my '95 exceed for first time in 3 years today, driver's door handle the exact same so thanks for de demo 👍👊 I have one other issue, the third time I went to start it, all I got was very rapid clicking/ticking, no movement in the engine, is this my starter solenoid?
@StevenRobertTaylor
Жыл бұрын
Hi, thanks! Have afew more videos in the pipeline recorded on working on this car. Yeh first thing I would do is load test the batteries, then check the connections and earth straps to vehicle. If all that is ok then it's likely the starter. I just swapped mine out for a spare I had for that exact reason.
@eoinds
Жыл бұрын
Savage, sound Steve! I'm actually working in Denmark and don't get home much, so I'll be glued to your vids when I'm working there, then tear my paj a new arsehole when I get back to Ireland 😁 keep up de great vids 👍 sound
@henrynyabuto4892 Жыл бұрын
Nice..so it's recommended to replace all the glow plugs even if some of the old ones are working?
@StevenRobertTaylor
Жыл бұрын
Thanks! Well it doesn't really make much difference. I just like to put sets of parts in if I have them. Il keep the old ones for spares when these stop working
@egasseraiva7397 Жыл бұрын
I have one too
@efalang2228 Жыл бұрын
what size are those tires? and wheels?
@StevenRobertTaylor
Жыл бұрын
Hi, they're 33x12.5x15 on 10j rims
@efalang2228
Жыл бұрын
@@StevenRobertTaylor did you crank the torsion bars or did the lift?
@StevenRobertTaylor
Жыл бұрын
@@efalang2228 yeh I lifted it. Nissan patrol y60 springs in the rear and indexed the torsion bars 2 splines, flipped ball joints and removed bump stops.
@altechuk Жыл бұрын
Glowplug on top of a battery starting a fire. what could possibly go wrong!!!
Пікірлер: 24
Quite a helpful video and a nice looking Pajero. Thank you.
@StevenRobertTaylor
3 ай бұрын
Hi, thanks! Yeh they don't make them like this anymore that's for sure.
@mdirtydogg
3 ай бұрын
@@StevenRobertTaylor, Absolutely. Everywhere we see, we see electronic wonders. Please do consider putting up more videos as you do repairs on this vehicle. It will help people like me a lot. Thanks again.
@StevenRobertTaylor
3 ай бұрын
@@mdirtydogg Yeh, I recorded one to upload where I did the timing chain and a service. It should be uploaded soon. Thanks for watching.
same glow plug problem as mine just spent £2500 have all sills and floor welded on mine and rust treated this is my 4th one
@StevenRobertTaylor
7 ай бұрын
I know the feeling, I've put afew more plugs in since that video and have now got a set of NGK CZ256 to go in. Have done a video of all the welding I did aswell if you're interested in that. Thanks for watching!
Beautfiul car
@StevenRobertTaylor
Жыл бұрын
Thanks! Nice to keep these old cars on the road. Have another video coming up of all the welding I had to do to get it through its annual inspection.
Hey Steve, great vid, just started my '95 exceed for first time in 3 years today, driver's door handle the exact same so thanks for de demo 👍👊 I have one other issue, the third time I went to start it, all I got was very rapid clicking/ticking, no movement in the engine, is this my starter solenoid?
@StevenRobertTaylor
Жыл бұрын
Hi, thanks! Have afew more videos in the pipeline recorded on working on this car. Yeh first thing I would do is load test the batteries, then check the connections and earth straps to vehicle. If all that is ok then it's likely the starter. I just swapped mine out for a spare I had for that exact reason.
@eoinds
Жыл бұрын
Savage, sound Steve! I'm actually working in Denmark and don't get home much, so I'll be glued to your vids when I'm working there, then tear my paj a new arsehole when I get back to Ireland 😁 keep up de great vids 👍 sound
Nice..so it's recommended to replace all the glow plugs even if some of the old ones are working?
@StevenRobertTaylor
Жыл бұрын
Thanks! Well it doesn't really make much difference. I just like to put sets of parts in if I have them. Il keep the old ones for spares when these stop working
I have one too
what size are those tires? and wheels?
@StevenRobertTaylor
Жыл бұрын
Hi, they're 33x12.5x15 on 10j rims
@efalang2228
Жыл бұрын
@@StevenRobertTaylor did you crank the torsion bars or did the lift?
@StevenRobertTaylor
Жыл бұрын
@@efalang2228 yeh I lifted it. Nissan patrol y60 springs in the rear and indexed the torsion bars 2 splines, flipped ball joints and removed bump stops.
Glowplug on top of a battery starting a fire. what could possibly go wrong!!!
@StevenRobertTaylor
Жыл бұрын
Evidently nothing! 😂
a 1995?
@StevenRobertTaylor
Жыл бұрын
Yeh 1995. 28 years young now
@hatdogatpandesalsal
Жыл бұрын
@@StevenRobertTaylor i have one too
@StevenRobertTaylor
Жыл бұрын
@@hatdogatpandesalsal they are a fine machine