Hi Joe, My name is Amanda and I'm from the United States. My first car was a 1994 3000GT. My dad bought it on Ebay, and drove 2 states over to get it for me. It had 100k miles on it and a cracked windshield, but i loved it. Anyways, I'm grown now and out on my own, but my first car has been sitting in my dad's garage for coming up on 15 years now because he can't part with it. A few years ago he finally starting restoring it and recently started watching your videos. He had me sit down and watch one with him the other day. He is so grateful for all that he has learned from you and he thinks what you are doing is great - so keep going! Thank you for all your hard work.

@3000GTGTORestoration

3 жыл бұрын

Thank you. I appreciate your feedback.

I don't even own a 3000GT, but your excellent videos and professional explanations make me want one! I'd just need space to store it alongside my 90 300ZX TT. Screw the ludicrously priced Supra and NSX, these two are criminally underrated, even if it is a bit hard to work in their engine bays.

This video is perfect. Joe's method of actually showing the fuel set-up makes it so clear. Just installing a fuel tank and pump in my GTO. This is just gold.

You Rock Sir!! Thank you for taking on tough tasks (and guiding us through the process) on this amazing car

@3000GTGTORestoration

3 жыл бұрын

You're welcome. Thanks for the feedback and support.

life saver. I have a 1997 Mitsubishi SL and the condition of the top of the fuel pump is the same like in your video I been putting penetrating oil for a week and today went and use the wire brush all around the nuts and got them lose, I tried to disconnect the rubber hose but it will not turn, so I came and watch your video OMG now I know what to do. thank man. My name is Galo and I am from Clarksville TN.

@3000GTGTORestoration

3 жыл бұрын

Thanks for the feedback Galo. Glad I could help.

Thank you so much for video, I've got a 16,000 mile car that hasn't been started for years, old gas and bad pump, now I've got it running again. Thank You!!!

@3000GTGTORestoration

2 жыл бұрын

Great to hear another one is back on the road.

I'm in the process of doing this right now. How did you know, you legend? you've really helped me! thank you.

Thank you for this i have to do mine soon great videos as always

Thank you, This video helped me perform the repairs on my 3000gt.

Thanks for the vid. Looking forward to replacing mine and mine all looks clean as in those areas

Appreciate the video gonna be attempting this job in a few days on a dodge stealth!

Fantastic video, so detailed. Thanks again Joe!

@3000GTGTORestoration

3 жыл бұрын

Thanks. I knew that a lot of people needed this.

Thank you! exactly what i needed

Thank you for the wonderful video

Awesome video Joe. I know this will help many people out there.

@3000GTGTORestoration

3 жыл бұрын

Thank you. I agree that it will be a big help.

Thanks for your video...its help me change filters. Great!

Nice clear instructions. Thanks for the tips .

Brilliant as always..

Found your channel buy luck bout a dodge stealth 1990 manul 5 speed your videos have help me so much

I’m coming to get my fuel joe hahaha

My face would have been a picture when you explained the fuel pumps in winter over an empty tank (42:45) I've been trying to diagnose my car that, with an almost empty tank, decided not to start after winter

I'm glad you see the madness of boogeyman 19. People are finally starting to wake up. Great video as always Joe 👍 I have a suggestion for an upcoming video.. You're an electronics guy by trade right? I'm sure you've had a go at repairing the climate control screens in these cars before. That old r37 resistor blew out in mine recently I'd love to see You demonstrate the DIY job for it

@leeksoup3199

3 жыл бұрын

"boogeyman 19"?

Now what if on the fuel sending unit the red, blue, and white cable are corroded. Is it better to replace the unit or find a way to sodder it back together. On my 94 sl it seems the original owner hotwired it so that way when the car starts the pump starts making the car idle high when in park, jult when you try to quickly accelerate, and the fuel gauge in the dash cluster doesn't work.

Hi Joe. Would you like to tell what is the measurement of this rubber hose? Thank you

Got a non starting gto 95, the high pressure line is bent on mine do you think this could stop it from starting? It’s evident someone’s tampered with it and rounded off the top nuts

I'm needing a new rubber line like you have in the video. Where can I find that?

Does the fuel go up to the regulator Or to the front side of the fuel rail? I have fuel coming from that line when I turn the car over to test the fuel pump.

Fyi have the exhaust and and Shock in place on a turbo version, this does become a Chinese puzzle, to get the grips in the proper place !

Hello great videos would you be able to do a video on replacing expansion valve for air conditioning i have a 95 3000gt SL that doesn't stay cold at an idle and I think that might be the issue thanks

@3000GTGTORestoration

3 жыл бұрын

I do not cover Air conditioning. Sorry

I have to crank my car for 10 or so seconds before it will start after I replaced my fuel pump do you think that the rubber seal on the fuel pump and fuel pump hanger is bad or not correctly sealed?

Hi....what is and what does the blue filter, in the tank,becuase de return fuels come in from another hose to the tank.

How do I get that hose made? And how long is it?

Please Help, drove my Mgto 2000 about 6 months ago, parked up due to winter, Come to start it last week and it just cranks over but does not fire up. Plenty of fuel and good battery charge And advise will be much appreciated

Is it still possible if I don’t take off the tire? Where my car is sitting I can not remove the tire. Can I just do it from underneath?

At 11:00 that hose is impossible to take off

Hi Joe. Could you make a video, how to replace interior fuse box? I looked down there and only saw one bolt (right side)....the thing kinda goes up in there, so Id like to know what other bolts I have to get too to pull it out...I know theres a bunch of harnesses I gotta pull.

@3000GTGTORestoration

3 жыл бұрын

You can request videos on the forum. Forum.the3000gtplace.com

Anyone know where on earth to buy a new hanging fuel assembly unit?

Every time I try and turn my 3000 on now I have fuel coming pouring out of the charcoal canister any ideas?

You didn't mention fitting an aftermarket pump like a walbro. They're shorter than stock so you can't fit them using the o ring inside the pipe, You've got to cut off the bottom of the cradle so the pump sits in the bottom of the tank, Got to cut off the bottom of the pipe it attaches to then use rubber hose to connect the pump to the outlet pipe. Otherwise you lose fuel pressure on corners with low fuel level.

@3000GTGTORestoration

3 жыл бұрын

I didn't mention fitting any other pump because these are restoration videos and not modification videos. Original pumps are still available.

had a 1990 camaro i cut the trunk and it worked fine, just be careful

Where can you find that smaller hose for less then 80 dollars

Is the NA fuel pump assembly the same length as the VR4 excluding the pump size?

@3000GTGTORestoration

3 жыл бұрын

I have no idea. Sorry

@georgeh210

3 жыл бұрын

@@3000GTGTORestoration maybe not because the fuel tank would be different too.

My hose seems to be rusted to the pipe, thinking about cutting the hose, but the exact hose is impossible to find ? What type of place would make a replacement hose and what are the connector sizes I would need to use to have it made ?

@3000GTGTORestoration

3 жыл бұрын

Any hydraulics business would be able to make it. Just take the old one along and they will copy it.

@rickedwards7172

3 жыл бұрын

Ty, I will see if I can find a local one here to do it. 3sx does sell them, but for like 75 bucks! Ouch !

Have a 98 gt and the AC/heater fan is not working. Do you have a video on replacing this. If not, how do I get to the fan? Thanks

@leeksoup3199

3 жыл бұрын

The guys on the forum may be able to help: forum.the3000gtplace.com

Do you have a video on how to remove the crankshaft retainer?

@3000GTGTORestoration

3 жыл бұрын

Not yet.

@javierayala9250

3 жыл бұрын

@@3000GTGTORestoration oh okay thank! Because on my 1992 3000gt a leak started coming from where the crankshaft seal is coming from but, the retair is damaged and the leak is coming from there

46:02 hi joe good afternoon here in America 🤣 I’m just wondering where or what link did you get the hose on 46:02 ? Can you or anybody else please help..Thankyou.

@3000GTGTORestoration

3 жыл бұрын

I just take the old one to a local hydraulics shop and they make up a new one while you wait. Costs about 20 bucks.

@SlowedsongsV2

3 жыл бұрын

@@3000GTGTORestoration okay.. Thankyou very much !

so, i got a replacement/upgrade fuel pump from aem for my turbo 300GT but it is missing the screw hole at the bottom of the fuel tank in 39:45, are there any alternatives to fixate the fuelpump?

@3000GTGTORestoration

2 жыл бұрын

I would buy the correct fuel pump.

@alexander18ism

2 жыл бұрын

@@3000GTGTORestoration i feared u might say that, problem is it takes about 3 month for mitsubishi germany to deliver an oem fuel pump

@3000GTGTORestoration

2 жыл бұрын

Which country are you in?

@alexander18ism

2 жыл бұрын

@@3000GTGTORestoration I am from Germany