One step closer to getting gapped by a stock block Evo 🤧

@huracanian3051

3 жыл бұрын

🤔 u must be sick .. been drinking all day again 🍺🍸🍹? lolol.. or u hit ur head 🤕 .. Time to quit smoking 🚭 boy

For anyone who doesn't know... you DO NOT undo the fuel hose from the sender unit side, the nut is locked, you under the same rubber hose from the fuel line going to the metal line going to the fuel filter. This is the main reason these end up in the trash all the time :)

@Saiyanblackx

11 ай бұрын

Yea i found this out the hard way lol

Great video, nice to see these coming back to life

Short and to the point. I like it!

@huracanian3051

3 жыл бұрын

I tried lol I just got mad ever video about is like 25 to 40 mins of b.s. lol I'm not trying to talk crap I understand it's you got subscribers that want to hear what they did about their day or whatever but then don't title it how to fix your sending it lol

Great video dude, really appreciate it, hope to see some more from you !

@huracanian3051

3 жыл бұрын

I got a few lol every Monday .. sometimes Thursday

Thank you I have the same problem and your video explains very well how to make this repair. Awesome.

@huracanian3051

2 жыл бұрын

Well thanks man ... there's also a whole engine rebuild on my channel... so if you're interested think about subscribing maybe

One of the few times KZread's recommended does me justice thanks for the video!!

@huracanian3051

3 жыл бұрын

Forsure ... U fixing ur pump ?

@jesscesanto9127

3 жыл бұрын

Yeah I was driving my 3k hard hit a dip then the car suddenly started dying I ruled everything out and my last resort was hit the tank idiot home opened it up and saw that it had gotten loose my guess was from the original owner not doing the job right saved me 60 for a new pump

🥳 so happy u made this video. there really is not a good how to video on how to do this

@huracanian3051

3 жыл бұрын

Tell me about it lol

This is one of your better videos.

I am in the same exact boat with the fuel pump on my VR4 😩 bro thank you for making this video!!!!!👍🏼👌🏼

@huracanian3051

3 жыл бұрын

O yea no problem man.. you run into any more problems I'm sure I have another video on that too lol

Thank you for your videos

@huracanian3051

5 ай бұрын

For sure.. what u working on?

Your a hero for this vid

@huracanian3051

2 жыл бұрын

Lol 🤙

At 8:12 did ever leak fuel on you man !!! Nice videovu save me some money

@huracanian3051

3 жыл бұрын

Nope haven't had any leaks yet

It's good to see you dropping videos more often keep it up PEACE ✌️

@huracanian3051

3 жыл бұрын

How u been man

@ObtainableSkills1

3 жыл бұрын

I've ok thanks for asking

@huracanian3051

3 жыл бұрын

@@ObtainableSkills1 u been putting out videos?

@ObtainableSkills1

3 жыл бұрын

I've been live streaming but channel isn't doing the greatest it's kind of depressing LoL

@huracanian3051

3 жыл бұрын

@@ObtainableSkills1 lol just keep doing it

Good info & straight to the point! Looks like you are in Ohio? Working on a 97 sohc that has been sitting for a while & not getting fuel right now. Reason I ask about Ohio is I also have a 96 Spyder that has a hydraulic leak somewhere I can't find. Any experance with the Spyders? I'm just south of Newark.

@huracanian3051

Ай бұрын

No, I don't know anything about the spiders. Does the top work with hydraulics? ?

Great video! This definitely brought back memories lol. That fitting on the line that broke is probably one of the biggest PIA to get loose since the threads on one end is in opposite directions of the other😒.

@huracanian3051

3 жыл бұрын

Yeah that nut on the Hardline doesn't turn either I didn't know that

@huracanian3051

3 жыл бұрын

Did you put that bracket back on the bottom of the sending unit or did you leave it off like I did ?? I'm worried about is smashing the filter but I'm also worried about the pump getting stuck to the bottom of the tank soooo lol idk

@jamesparker3062

3 жыл бұрын

@@huracanian3051 I replaced mine about 4 yrs. ago so I'm a little fuzzy but I think I left mine on.

@jamesparker3062

3 жыл бұрын

@@huracanian3051 honestly I can't remember if that nut turned or not. All O remember is having to use a few vicegrip plier and a box end wrench to get that line undone. Looking at pics and vids of most peoples fuel sending units makes me glad the original owner of my VR4 keep it in the garage lol

Good job. I went through the same deal a few years ago like many of us 3s owners do. Wirebrushed it and used por-15 paint on it which has held up great.

@huracanian3051

3 жыл бұрын

I'm going to take it back out and try to make it a little bit better drives me nuts it being like that... did you end up putting that bottom bracket back on ? Or did you leave it like I did?

@rickarda9232

3 жыл бұрын

@@huracanian3051 Nah that lower bracket only works with the stock fuel pump. I did like you with hose clamps. I think might be a good idea to coat it good in a rust protective paint because there is alot of water and dirt that gets trapped there. I mean you saw what it looked like before :) But you will probably be fine as is. Mine wasn't that bad in terms of the rust but I kinked the metal line when trying to remove the hose so had to replace it because of that. Kinking that line is also comon and can lead to bad things because of lack of fuel obviously.

@huracanian3051

3 жыл бұрын

@@rickarda9232 yeah I'm going to take it back out and repaint it.... I'm probably going to drop the fuel tank send that down and paint it too .. just wanted to make a quick vid on how to fix that sending unit cheap I need to get back there and replace the diff anyways so once I get started back there I'm going to overdo the whole back end like I always do lol .. I'm going to replace that rubber line with braided

@rickarda9232

3 жыл бұрын

@@huracanian3051 Yeah all good sounds like a plan. Redid my rear subframe a few years ago but actually just bought a low milage x-frame out of a 99 for cheap without any rust and fresh bushings. So was a quick swap. Did the rear wheel steering delete while I was there. That system weighs like 25 lbs. But if you like the AWS you may awell keep it. Oh and the rear diff that thing is usually covered in rust. Like really bad. But go to town on it with wire brushes and paint that too. I did that also.

@huracanian3051

3 жыл бұрын

@@rickarda9232 I already deleted my rear steering and painted my subframe and put new bushings in.. a few years ago I just did it real quick

Damn U learned something new everyday. Hopefully future 3kgt owners learn from U to make sure they use the 19mm not the small 14mm on the line so won't have to go through this as well well disconnecting from bottom of the car. P>S> what tool is that the blue one that using to cut hoses? that shit looks bad ass!

@huracanian3051

3 жыл бұрын

It's a Ratchet pipe cutter lol it cuts everything

Yeah no need to spend all that money on a 3SX one , just drill out the OEM one an do exactly like you show here. Good Video Ian. Will help out a lot of people I bet. I'm off to go watch more of your videos while I relax before heading out to the garage an put some more parts back on the Stealth.

@huracanian3051

3 жыл бұрын

Thanks man what all u doing to ur stealth ?

@tsgarage2382

3 жыл бұрын

@@huracanian3051 tdo4H 19t Arashi, RC 550s MAFT safc2 combo, cxracing side mounts kit fits soo good, Derale oil cooler, PST 2 pc, 300m ouput an sleeve an Front LSD. with water/meth kit. eventually I will move on to a better ECU an when I do I will go for the Forged engine build an single turbo, For now I will enjoy this tried an true setup, for a while Its been a Blast learning the Safc an rebuilding my Cylinder heads with new VSS an the high rev valve springs and cleaning everything. Rebuilt Transfer case with the hardened sleeve. I will upload a video of it.

@huracanian3051

3 жыл бұрын

@@tsgarage2382 that's sick .. My side mount intercoolers.... Idk the piping didn't really fit to good... U got a link for that oil cooler ?

@tsgarage2382

3 жыл бұрын

@@huracanian3051 derale.com/product-footer/fluid-coolers/universal/series-10000-stack-plate2013-10-28-09-53-271154803941/51608-detail

@huracanian3051

3 жыл бұрын

@@tsgarage2382 did you use your stock oil sending unit or did you get one of those adapter plates and then block your lines off? If not do you know what size AN adapter fittings I would need cuz I know the car is female so I need like a AN to AN fitting with male on both sides but I don't know what size 10AN or 8AN ?

Thank you

@huracanian3051

3 жыл бұрын

For sure ... you have any questions just let me know or if you need help with anything else I probably did a video on that too or I'll do one

Great video. Just be careful with the fuel hose you chose. Its not rated to be used for fuel injection and will bulge and burst in time. Speaking from experience.A lot of people miss that.

@huracanian3051

3 жыл бұрын

I'm going to do all braided line eventually .. Can't really use any of that rubber line for e85

Good fuel pump trick I hope mine don't look like that when I take the cover off lol

@huracanian3051

2 жыл бұрын

Lol

Dude ur video's just keep getting better and better keep it up ur going to blow up one day

@huracanian3051

3 жыл бұрын

Idk about that

Great tutorial man, thank you! What was that rubber washer you put on the 90 degree fitting though? Have specs on it?

@huracanian3051

3 жыл бұрын

No you just got to get a rubber washer that has the same diameter as that fitting so when you torque it down it seals like a gasket.. .. the rubber washers I got where actually a little bit too small honestly.. you need to get a rubber washer that's the same size as that fitting something like half inch or something it can be a little bigger

@boosted_streetz8147

3 жыл бұрын

@@huracanian3051 got it, thanks for the quick response! Much appreciated

@huracanian3051

3 жыл бұрын

@@boosted_streetz8147 yeah man no problem you need anything else just ask

Do you have a fb as well awesome work

@huracanian3051

3 жыл бұрын

No I got 2 FDs

Do you think if I cut off both the oem connectors on the top of the fuel delivery system and the one that connects to the fuel line that I could just put a high pressure hose on each side would it leak or bulge or anything?

@huracanian3051

2 жыл бұрын

You would have to flare it for sure .. I honestly don't know I want to tell you something and you leak everywhere

@620day9

2 жыл бұрын

@Huracan ian I got it thx for the reply I ended up just rebuilding the old hose lol

O thats not bad at all

@huracanian3051

3 жыл бұрын

Yea it's not hard at all

Hi Ian may you tell me where did you get the rubber washers? are they Nitrile washers or Epdm rubber washers? Just curious about the size and material since they will be sitting in gasoline I don't want them to be eaten over time. Thank you for your time. Cheers!

@huracanian3051

3 жыл бұрын

I got them on Amazon I use a neoprene washer good for gas and high heat

@RamonHernandez-oi7fm

3 жыл бұрын

@@huracanian3051 awesome i bought everything else you posted a link to. Do you remember the size by any chance. So many online.

@huracanian3051

3 жыл бұрын

@@RamonHernandez-oi7fm no sorry ... get the same size as whatever the 90 is I really don't remember man... .. probably just the next size bigger than the hole that I drilled ...

@RamonHernandez-oi7fm

3 жыл бұрын

@@huracanian3051 thx m8. Have a happy 4th. Cheers

What is the link to the gasket you used with the 90degree fitting on top of the sending unit?

@huracanian3051

2 жыл бұрын

like the rubber washer that I put in between the fitting ?

@ignaciocastaneda5678

2 жыл бұрын

@@huracanian3051 yes

@huracanian3051

2 жыл бұрын

@@ignaciocastaneda5678 I don't remember you just need a rubber washer .. that the center hole is as big as that 90-degree fitting ..

@ignaciocastaneda5678

2 жыл бұрын

@@huracanian3051 sounds good thanks

Dumb question, what size are the hose clamps and rubber gaskets...3/8ths?

@huracanian3051

3 жыл бұрын

Yep yep ... Not dumb question

@Wootstapler

3 жыл бұрын

@@huracanian3051 This is what I'm dealing with ... imgur.com/a/1tjCp6N

@huracanian3051

3 жыл бұрын

@@Wootstapler lol o yea .. That's a fun one lol

Probably gonna end up taking my fuel pump out tomorrow so this may help alot!!

@huracanian3051

3 жыл бұрын

Yea man ... let me know if you run into any problems I'll try to help you out

@josephmcgowan4436

3 жыл бұрын

@@huracanian3051 I bought a 1991 Stealth RT TT and it's got a 6 speed in it from a 96 model, anyway runs but doesn't like shifting above 2k rpms....... it feels like a fuel issue not sure what else to start trouble shooting yet, already put in a fresh Fuel filter so gonna try a new pump

Hello Huracan Ian I was wondering if I could somehow get into contact with you related to issues im having with my 91 SL, ive replaced so many parts that at this point I need someone who knows. TIA

@huracanian3051

6 ай бұрын

I mean what's wrong lol 😆

@brandonfrancken5955

6 ай бұрын

Im misfiring/start up is pretty rough. I've changed NGK Full Spark Plug/Wires, New PTU, New Ignition coils, New ECU, I did have a timing belt job done to it so I manually cranked the engine and the marks on both heads and crankshaft were aligned. Im thinking to check fuel pump and injectors next or bring it to Fort Meyers Mitsubishi as its 30 mins away@@huracanian3051

@brandonfrancken5955

6 ай бұрын

- NGK Full Spark Plug Wire Set (From Autozone) $150 (Bought 6 NGK Platium Spark Plugs as well 12-18-2023), PTU CarQuest, Ignition Coil, CarQuest ECU, Timing Belt/OEM Mitsubishi Water Pump, metal gasket, and pipe o-ring,OEM Rear Idler Pulley,OEM Hydraulic Tensioner,Upgraded OEM #8 tensioner pulley bolt (R'Venge Performance) these are all things ive replaced and I also checked the shops job on the timing belt, All cam marks aligned same with crankshaft when I manually turned it over.

@huracanian3051

6 ай бұрын

@@brandonfrancken5955 well platinum spark plugs are garbage. I always run copper. I did a video on it but what's the problem? What are the issues you're having?

@brandonfrancken5955

6 ай бұрын

its running real rough esp off start and troubles accelerating/Misfiring @@huracanian3051

How did you reconnect the ground?

@huracanian3051

2 жыл бұрын

It's been a little bit since I did that what ground are you talkin about ?

@mitchellkohrmann

2 жыл бұрын

@@huracanian3051 I just noticed in you next video how you did it. I broke the fuel elbow and the ground just like you did. I saw that you just ran that broken black ground wire on top to one of the nuts that bolts the sending unit down. Thanks for the quick reply!

Do you mind sharing the parts list?

@huracanian3051

3 жыл бұрын

Yea sorry it took me so long to get back to u .. I seen your comment this morning and then I fell back asleep and forgot that you left the comment lol

@huracanian3051

3 жыл бұрын

6an female swivel to 3/8 hose barb .. 90 degree 6an male flare union bulkhead fuel fitting with 6an bulkhead nut ... Thin I used a metric m14x1.5 female to 3/8 hose barb to fit a 3/8 fuel line .. U and get that m14x1.5 to 6an which I'm going to end up doing.. I just did that for now to show people you can do it cheap

@salcano6039

3 жыл бұрын

@@huracanian3051 Your totally good man. I just appreciate you reaching out. Rusted out fuel hats is very common on these cars as you know. Your awesome for restoring such a unique machine. Thanks for the info!

Instead of cutting with a Dremel couldn’t you just drill from the top side Where the fuel line hole is as a pilot for your drill bit ?

@huracanian3051

3 жыл бұрын

I mean ur not wrong lol .. you might bind up and break a drill bit if you're sending units really rusty you might break off a really big hole if the fuel line brakes off and takes a big chunk of the sending unit with it

Can i get a link to the parts?

@huracanian3051

3 жыл бұрын

I've tried sharing the link on here a few times I got in from Amazon but the links don't seem to ever work

@huracanian3051

3 жыл бұрын

Here's a part list you can just look it up on Amazon 👇 6an female swivel to 3/8 hose barb .. 90 degree 6an male flare union bulkhead fuel fitting with 6an bulkhead nut ... Thin I used a metric m14x1.5 female to 3/8 hose barb to fit a 3/8 fuel line .. U and get that m14x1.5 to 6an which I'm going to end up doing.. I just did that for now to show people you can do it cheap

I had that problem and I ended up buying a another fuel pump unit

@huracanian3051

3 жыл бұрын

How much u end up paying?

@MidnightClubsSR

3 жыл бұрын

@@huracanian3051 on eBay the seller wanted $250 so I offered him $150

@MidnightClubsSR

3 жыл бұрын

Can you do another video how to install a oil catch can

@huracanian3051

3 жыл бұрын

@@MidnightClubsSR yea I do one for ya when I get there

@MidnightClubsSR

3 жыл бұрын

@@huracanian3051 cool bro. I have a oil catch can I just don't know where to put it

What are you doing step bit

@huracanian3051

3 жыл бұрын

? Huh what am I using ? .. yes I used to step bit

@maxwellhall6606

3 жыл бұрын

@@huracanian3051 haha I was just using that meme that’s been circulating around the internet.

@huracanian3051

3 жыл бұрын

@@maxwellhall6606 lolol o