You’re a godsend mate, was worried I would either have to lift the motor or take out the radiator

Just did this over the past weekend. On my car (twin turbo) there was a bracket holding the knock sensor connection on the top of the front of the alternator bracket. You can see the empty hole on the black bracket in this video. Just disconnect the wire connector to separate the parts, and remove the single bolt to free this part. Also, if you need a little more clearance to remove the alternator, the A/C condenser fan can be easily removed. The fan is held on to the radiator with only 4 bolts: 2 top and 2 bottom. The 2 bottom bolts need to be loosened from underneath; they don't need to come all the way out. The top 2 bolts are easily removed, then pull the fan straight up and out. Be aware that this exposes the delicate fins on the backside of the radiator. Place some cardboard up next to the radiator to protect the fins while working.

@angelasmith7249

3 жыл бұрын

I have an NA and I removed the condenser fan. Only trouble is its still easy to damage the radiator. Hubby stuck a piece of corflute in front of radiator. I'll see how that works

I’ve had my 1999 mitsubishi 3000gt sl for over 2 years and have been dreading doing maintenance on it cuz it seems everywhere I take it people want to charge an arm and a leg so I started doing my own research and so far your videos have been the best help thank you!

@3000GTGTORestoration

4 жыл бұрын

You are welcome. Thanks for the feedback.

Thank goodness for this channel. Glad we actually have knowledgeable people making professional in depth videos for these awesome cars. Doing the alternator as we speak with this video on the iPad walking me through it.

Thank you so much my good sir, you just helped me save so much time! Amazing tutorial!

Thought this was going to be a nightmare but you make it look a lot easier then I thought it would be

Wow, already at 800! That was fast! That’s so awesome!

Great video as always, very informative! Thanks!

Legend thanks again Joe 👍🏻

I really enjoy your videos have been watching them for about a year. I just changed all my assessory belts, not much room but with your help it was much easier. I will watch your videos even though I don't need the repairs. Thank You Much Again Brother

Pretty good, nice tips! We all appreciate it!

Gotta do this job sometime in the next few weeks and was really looking forward to watching "How to take the wheel off"🤣

So glad I found your channel bro not too many people still post about this beautiful car thx 👍🏼

@3000GTGTORestoration

4 жыл бұрын

You're welcome and thanks for the feedback.

I have a 97 vr4 and this really made it easy for sure thanks for the video

Awsome job Joe thanks again mate ! Excellent video, they are pumping out now👍👍 Craig Perth Western Australia 🇦🇺 1990 GTO

Really good video man keep them coming

Awesome. Thank ya sir

I have one just like that... I bought it off the showroom floor in 1991. Beauties. Good job.

Sign me up for that rebuild channel! I really enjoy learning about the mechanics too.

Thank you

Good content and presentation.

@3000GTGTORestoration

2 жыл бұрын

Thanks

Wow very informative thanks! My 97 3000GT just got a new battery but its already drained. Will be checking for any parasitic drains and may change the alternator. Thanks!

Thank you Joe. Did the job today and worked out well. Biggest issue was getting it out and in, Phew!! Awesome help from you. Very much appreciated!! Dave

@3000GTGTORestoration

2 жыл бұрын

Thanks for the feedback Dave

Had to do this to my 3000gt today, this was a lifesaver.👍

@6lackRain

3 жыл бұрын

did you have trouble getting the bolt off the tension pully??? i have trying to change my alternator but i cant get the bolt off

@justsomeguywithanfc1324

3 жыл бұрын

@@6lackRain I didnt have a problem but I dont recall having to take a bolt off the pulley but i did have to loosen the middle bolt of the pulley then loosen the tensioner bolt to get the belt off.

Wow this is incredibly informative, getting a 1990 GTO soon so will definitely be looking to this channel if anything needs fixing.

@edsonmendonca3093

4 жыл бұрын

Hi, what is your country?

@3000GTGTORestoration

4 жыл бұрын

UK

Pretty cool to see someone doing videos like this. Wish there was someone out there doing a 280zx like this. Anyways thanks for the information. -Wahpeton, North Dakota ('94 3000)

@3000GTGTORestoration

3 жыл бұрын

Thanks for the feedback Dominick

👍

Hey Joe loving the videos so far, i would love to see if you can make a video on refurbishing the fog lights. Thank you, -Jay, Connecticut

@3000GTGTORestoration

4 жыл бұрын

Hi Jay. This has been requested by a number of people and can be made to look new for little money. I will get on it as soon as I can.

Hey Joe.. I'm making a video about my car as a submission for entry for the contest you're currently doing, and was hoping you could take a look at it. I've found some very alarming rust that's formed from the inside in the trunk, and it looks like I'll have to split the overlapping layers of sheet metal to get at it properly. I've been through a lot with this car and I don't want to give up on her. The are a bunch of other things too, and they would make a pretty comprehensive video series. Not very serious but lots of variety haha Congrats too mate the channel is gaining ground and it's very nice to see. I predict 5k by next year once word really travels (and the KZread algorithm sees the regular uploads you've been doing).

@3000GTGTORestoration

4 жыл бұрын

Probably best to send me some pictures on the forum so I can pick through the best bits.

Larry From Chicago: Joe another excellent video and my project tomorrow and lifters next. I am also replacing the belt. Should I replace the tensioner and isn't there more than one? Love all your videos, thank you brother!

Does this work with the es as well? I’m replacing one tomorrow

Can you also do a full front and rear axle replacement? Rotors included?

My engine bay was full of oil from valve cover leak so decided to remove drivers side fan assembly instead of timing cover, didn't feel like getting oil on timing belt.

How do u remove the power steering belt

Can you please do a video on the turbo model?

Damn Joe, that engine bay is sooo clean! What do you use on all those pipes to keep them clean and shiny?

@3000GTGTORestoration

4 жыл бұрын

Meguiars vinyl and rubber cleaner 20. It has been discontinued now but you can still find it on the net.

The bolt that the harness from the car attaches to towards the bottom of the alternator is a 1/2 inch instead of a 10mm on the alternator I ordered. How can I fix this? The hole at the end of the harness isn’t wide enough

@3000GTGTORestoration

2 жыл бұрын

If you have been supplied the wrong part, contact your supplier and discuss it with them.

Good work bud , i have 1991 TWIN Turbo in RED , i need to do my alternator , when will there be video of how to repair unit , i am sparky so i am sure i should be able to fix my self

@3000GTGTORestoration

3 жыл бұрын

Hi Chris This job is on the list but I am snowed under with work right now and this is only a hobby. I have nearly 100 video requests to work on and I will do my best to do each on as fast as possible. I hope you can wait.

I replaced my alternator, now my belt is squealing. Did I make it too tight? And how long should I let car run after replacing alternator to recharge battery? I drove about 10 minutes and shut it off then I was gonna take it to work the next day but it wouldnt start.

@3000GTGTORestoration

3 жыл бұрын

Replace the belt if it is squealing. You could tighten it more but it needs replacing.

Have to do this. My car has a electric consumption.. smething is wrong with the alternator

Great video! Hi, My Name is Jamie I am from Scotland. In my GTO the speedometer has stopped working. I have looked online and believe their is a speedo gear that needs replacing. If you could do a video on how/where to purchase it would be highly appreciated. Thanks :)

@GTO3000TT

4 жыл бұрын

I've sent You a message

@edsonmendonca3093

4 жыл бұрын

Dependendo do ano do seu carro...Verifique os capacitores do painel...ou pode ser que o cabo quebrou por dentro....

hi i got a 91 3000gt sl non turbo and its my first car but can you make a video on how to remove belt that runs on ac compressor and alernator as diy cause i want to know how to work on my own car

@3000GTGTORestoration

3 жыл бұрын

It is already done. You will have to look through the list of videos to find it. It may be with alternator removal.

I am restoring a Dodge Stealth TT RT and I'm having so much trouble figuring out if there is an electrical problem, fuse problems, alternator problem, or just a starter problem.

@mikeromero574

2 жыл бұрын

Its a 1992 by the way

@tater_pootz1439

Жыл бұрын

Same 😭

LOL 0:00:06 (it's 6970 subscribers now)

I have a 1998 SOHC 3000gt where the alternator is at the firewall at the bottom of the engine. Any suggestions of removal.

@3000GTGTORestoration

4 жыл бұрын

I would really love to help I no longer have my only sohc 3000gt and it was the only one in the UK. You could go onto my forum and enter the competition to have the job done for free.

@heatherb264

4 жыл бұрын

@@3000GTGTORestoration Okay thank you so very much.

Can you do a video on 3000 gt air conditioning compressor remove and replace.? Thx.

@3000GTGTORestoration

3 жыл бұрын

Sorry but I can't do anything with air conditioning.

@ken7875

3 жыл бұрын

3000GT / GTO Restoration ok thx. Looks like it’s near your alternator.

Wh at tools are needed n ty

What paint did you use on your mustache, looks a little bit more than a satin but less than a gloss. Wouldn't mind the same finish on mine! Thanks - Paddy

@3000GTGTORestoration

3 жыл бұрын

I have it specially custom mixed to match the original paint. I have never managed to find the original paint code so it has to be done when needed.

@paddyhall523

3 жыл бұрын

@@3000GTGTORestoration yeah it seems like a good contrast at the front of the car. Satin black isn't quite the look I want either.

Do you have awd manual transmission for sale?

@3000GTGTORestoration

4 жыл бұрын

Yes. Please contact me via the forum

I have a question my alternator is in a different spot do you have a video for that my name is angie im from california i have a eo v6 sohc 92 dodge stealth please help

@3000GTGTORestoration

2 жыл бұрын

I do not have one of the SOHC models at the moment. Sorry

@angiefine7130

2 жыл бұрын

@@3000GTGTORestoration well i would like to request that you do sohc. Your the only one i trust and watch, i know your busy but please find time.thank you angie from california

@angiefine7130

2 жыл бұрын

@@3000GTGTORestoration well thanks anyway.

Hi, I would love to see a tutorial on how to remove the front active aero system! (The person who trailered my VR4 to my house completely ruined it while loading and unloading the car) Thanks, -Adam Warner, Ireland

@3000GTGTORestoration

4 жыл бұрын

Hi Adam. I will do this as soon as I have another turbo model in for repair.

@leeksoup3199

4 жыл бұрын

3000GT / GTO Restoration Perfect, thanks! :)

I thought everything was going well while I was taking off the plastic covers under the wheel well but when I got them off it turns out my alternator is mounted on the back of the engine rather then the front 😩

@justinhicks3300

Жыл бұрын

That is where mine is, what was the process for you?

My name is Cody Franklin from Texas in the United States, I really need your help taking out my fuel pump for my 1994 3000gt sl! One of my dream cars, and I came home to get new tires for her and I noticed no sound from my fuel pump and it won’t start no longer.. currently 98k miles and really need help trying to get the high pressure fuel line to disconnect from the fuel pump hangar. (The line on the immediate top of the fuel pump housing)

@3000GTGTORestoration

4 жыл бұрын

Hi Cody This is a really important video as so many people do damage while trying to remove it. I will try to get this done ASAP. Thanks for watching.

@codyfranklin9594

4 жыл бұрын

3000GT / GTO Restoration thank you so much!

Joe, did you replace all the nuts and bolts in the engine bay? They all look brand new!

@3000GTGTORestoration

4 жыл бұрын

Yes I did. Videos will be available soon on all the restoration techniques.

It’s easier just to remove the right fan from the radiator.

Not far from 1000!