What other vehicles would you like to see on our "What Wheels Fit" series?! Drop a comment below and don't forget to check out the largest online fitment gallery at bit.ly/2lEheYq

@EZ_EZzzz

4 жыл бұрын

Fitment Industries Garage well I would like to suggest in between Lexus IS and Lexus GS since I own a 2006 GS300 would like to know what you guys think fits. Because my future plans are to but my whole setup from you guys. And Thanks in advance.

@kylex71

4 жыл бұрын

AW11 please, or just MR2's in general. Gonna eventually be getting new wheels for mine and would love to know what you guys recommend.

Another reminder that Mitsubishi used to be cool.... the GSX was a dream car of mine in high school. Then the Evo 8 came along🤤... come on, make Mitsubishi great again!!!

@k3yglock821

4 жыл бұрын

Frrr

@freak227z

Жыл бұрын

My gsx was typical love hate relationship, loved when it went cool and really hated when it breaked down 🫠

@freak227z

Жыл бұрын

As always great work guys !!!! clearly explained and plenty of info 🙌🏻🙌🏻🙌🏻

You love to see it! Dsm gang!

Have a project GSX, this actually helps b/c despite watching your videos I can't make a guess on what fits. Funny enough I got a set of Evo8 wheels from the previous owner Thank you for the video, this really helps.

I have a eclipse gs and even that is fun to drive and sounds nice with an exhaust I can only imagine how the gsx drives🤤💯

Thanks for making this video!! Definitely helps 👍🏽

This was the inspiration and info I needed. Thank you!

That’s cool giving the Dsm some love and recognition I would probably go with RPF1s 18x9 gold or bronze color great video

Thank you soo much for the video!!!

I had from 16 to 18s on my dsms. My friend on the other hand had a white gsx on 20 inch enzetis slammed to the ground. Bottom of the bumper had 1 1/2 inch clearance from the floor

Great info thanks!

I got a stock 97 gsx less than 100,000 miles on it. But it's hard finding part here in Alaska

@ozoneswiftak

4 жыл бұрын

There is one parting out on dimond and old Seward. Down the road.

@ozoneswiftak

4 жыл бұрын

Did you buy that from a guy on Elmendorf base? For 600?

@avijohnson6423

3 жыл бұрын

you on the Alaska DSM Tuners facebook page? if not join!

@luisbarrueta658

3 жыл бұрын

Hey bro i got a 95 tsi awd talon.i could use some advice its my first build. Im also in alaska .im in anchorage .hmu we could talk about these dsms .

@jasonbowles4591

3 жыл бұрын

@@luisbarrueta658 Its my first build as well. So I dont know that much.

Haha eyyy the homies!! Ted and Mike! Wish i coulda released my specs on the video 🙃

Just got my 1998 eclipse gs for 500 hyped to buy new wheels

I have some 18" mb battles on my 98 gsx. It wasn't my first choice but they've definitely grown on me. They poke out a bit and I wasn't able to get the center caps to fit but other than that they've been great so far

Oh finally 😭👌🏼

Nice video i’m the owner of the white dsm with fenders. From spain

18 inch motegi FF7 rims look amazing on this car, my 1999 Mitsubishi eclipse came with these rims

Can you do a 3g please 👀🙌 much love 💯

Dsm GANG!!!!!!

my 2g gsx specs 17x10.5x-5 front 17x11x0 rear 215x40x17 work rezax 4 inch lips megan racing upper arms adjustable coils /BOY\ all the way

Please do a what fits on a 3g Mitsubishi Eclipse

Oh shit dsms are getting noticed?

Evo 8 enkei gang here 💪🏼

mazda 3 (including the 2019 gen)

My gst setup 18x9.5 +15 esr sr08 215/35 nankang ns-25 I have 2 inch lowering springs from Megan racing but you will 100% have to roll your fenders or maybe even get flares

@MichaelJohnson-sb5si

2 жыл бұрын

I am planning on a widebody, would I run into issues with 18x10.5 +15? Do we have to run stretched tires?

XXR 527 are the best ♥

@robbalinski1606

3 жыл бұрын

I've always wondered what wheel they were. I love those wheels, definitely get a set for my 2g at some point maybe see how they look on one of my 1g's as well.

Could you guys do a 2001 eclipse

i own a 99 gsx and am interested in buying the rpf1's but not sure about dimensions. i currently have 18's but might be looking to go down to 17's. mainly looking for some feedback or advice.

Evo 8 enkeis ftw

Hi, i have the same wheels of your favorite in the video the white one, but mines are 18x 7.5 you think i have to put spacers? Because the white one habe 18x 9, i have lower springs with adjustable shocks

07 Acura TL-S please

Looking for 17x8 or 17x8.5 RPF1 for my 2G dsm. Slightly lowered looking to not modify the lip or fender liner. WhAt offset should I pick?

Can we get a what wheels fit a 3g eclipse

Well I want one so bad but no one sells them where I live. I’m in Dallas,Tx

Hi I have a 2003 Mitsubishi eclipse gts and I'm trying to find out if wheels with this fitment would work 18x8.5 5x114.5 on it please and thank you

What fits an S13??

I have factory rims from a 08 eclipse on mine 215 45 17 on mine

235/45zr18 Will it fit an 05 Mitsubishi eclipse gs

Will a 3.8 motor 2006 fit into a 2001 Mitsubishi with a 3.0 spider

Whats everyones thoughts on XXRs? I have heard good and bad about them. I like the look of the 521's for my 97 spyder gst but I really like the look of the RPF1s. but the Ekeis are almost double the cost of the XXR's and I am having a hard time finding anyone with RPF1 in 18x9 +35 in black.

@fitmentindustriesgarage5583

2 жыл бұрын

Great question! What you're paying for here is essentially technology. While both are a casted wheel, the XXR is finished after casting, where as the RPF1 is actually rotary formed. Essentially what that is, is a technique that spins the wheel on a machine, while other wheels and a lot of heat are applied to the barrel, and actually stretches out the barrel to the desired width. What this allows them to do is cast a wheel thats say.... 18"x4", and then stretch it out to 18x8.5, which means they use less material, which means less weight. XXRs are completely and totally fine wheels. If you're racing the car, I wouldn't recommend a wheel thats fully cast, but for all intensive purposes outside of motorsport, XXRs are a great way to upgrade the look of your ride without breaking the bank. -Sean

What about 1G DSM'S

Have a project gs 97 mod, and this is perfect because i still dont know what wheels i want🤣

Bout to buy an rs clean asf..2k ..just needs rims ...

The 2ga 95-96 dsms have slightly less clearance between the wheel and control arm in the rear

What works for RPF1’s 100% no cutting or rolling for 17”?

@fitmentindustriesgarage5583

4 жыл бұрын

Our gallery is a great reference to see what fits best! --> www.fitmentindustries.com/wheel-offset-gallery

Why no te37?

I need one for the 4g lol 😂

And Axis model se7en

What size rim's and tires do I need for my 95 Eclipse RS with a rocket bunny kit from a frs.

@MichaelJohnson-sb5si

2 жыл бұрын

Did you ever get wheels? I am going widebody on my GSX and am wondering if 18x10.5 +15 would work, and if I have to use streched tires or not...

@SaveTheEclipse2020

2 жыл бұрын

Yes my rims are 15x10 and my tires are 225 by 65.

ET 20 its good for eclipse 2g?

@fitmentindustriesgarage5583

2 жыл бұрын

It depends on what wheel size you are running!

wtf i was just looking at buying one of these

@iboopthesnoots5284

4 жыл бұрын

same lmfao

What rims are those 3:05 ?

@luisrivera-ui9vp

2 жыл бұрын

Enkei mitsubishi evo 8

*just order myself advan tc 4, 18 by 9 by 35*

@fitmentindustriesgarage5583

3 жыл бұрын

🙏🙏🙏

Enkei rpf1 28x9.5+38 does not clear evo 8 bbk

I haven't seen an eclipse on the road in years.🤔

@mehtra7395

4 жыл бұрын

thats what i luv about em

@jtmagicman25

4 жыл бұрын

That's what I drive every day. 95 gst

18x10.5 +15 and the dsm isn’t Jdm lol they were never rhd so idk if that counts ...

@josephandreuccetti8043

4 жыл бұрын

DSM Keoni actually they were in japan

@MichaelJohnson-sb5si

2 жыл бұрын

Hey, I am looking for that setup for my GSX, what tires did you go with?

Dsm’s aren’t JDM just fyi they was not made in Japan lol

Mitsubishi just continues ruined their best looking car 🤦🏽‍♂️

Bro you need to improve how you talk on the camera.

I have a 95 2g with 235/45/zr18s on american racing rims with fender wells and no rub