Thank you for the video , I have a CNG Toyota prado with 3.4 5VZ and this dual system have a crucial need of non missfire engine.yoir video is super help on finding non visible problems
@richardabekeerthi81833 жыл бұрын
Good job
@SiyamandRashid6 ай бұрын
Thank you for the video, what to do if there is misfire in one or more cylinders?
@moulayediag3873 Жыл бұрын
grait ifo man ...thanks a lot
@muhammedsubhi20822 жыл бұрын
Good luck
@priusgame11782 жыл бұрын
Does the drive count always stay in the system or does it reset when I delete codes with a scanner tool? What is red flag number for a prius? I keep seeing 1-8 counts in misfire current nothing like the 1300 count you're showing In the video
@user-hr5dc4ly3q7 ай бұрын
Hi master wich mode of fast vci you are using with teachstream
@maheshmaheshf97193 жыл бұрын
Hi sir how I find otc it3 for toyota vci new softwaire new key no
@mikan42163 жыл бұрын
Where is this screen
@LusoboyaJames2 ай бұрын
How to flash Suzuki cars
@priusgame11782 жыл бұрын
Sort of have shaky idle on cold start nothing too crazy but current rates all showing 2,5, 7, 6 for a prius. Is this normal or something is going on?
@ukaszb5004
Жыл бұрын
Do you know the answer? What gen of prius?
@priusgame1178
Жыл бұрын
@Łukasz B my problem was badly clogged up fuel injectors. I switched them out with better used ones and it went away. If that doesn't work remove spark plugs and check them out. While doing that try to use a flashlight and look in piston head area to see if the pistons are charred up badly. That normally indicates engine is losing clearance in the piston rings area aka engine is starting to go bad. There's no undoing this issue if engine is slowly going bad so don't try to pay a mechanic extra cash to use a magic chemical to fix it. Final: check fuel injectors, spark plugs, piston heads visual inspection with flashlight
@ukaszb5004
Жыл бұрын
@@priusgame1178 Thank you for reply. My G2 has mileage over 250k km and some misfire problems on idle on random cylinders. I have changed my spark plugs (removed Denso Iridium have only 40k km). Nothing changed. But then I added good fuel additive and it is much better now. Oil consumption is not bad - only about 0.1L for 1000 km. I think I should give fuel additive more time.
@Name-hp2go
4 ай бұрын
Hey, if you still remember what fuel additive you have used? Is it Marvel mystery oil?
@mikmik42053 жыл бұрын
I cant see the datalist when i click data list its gives error cx4001
@mikmik4205
2 жыл бұрын
@@Jay-hr9ci how cab we update that have u got firmware ?
@mikmik4205
2 жыл бұрын
@@Jay-hr9ci is it possible to use the bluetooth odb with techstream
Пікірлер: 19
Thank you for the video , I have a CNG Toyota prado with 3.4 5VZ and this dual system have a crucial need of non missfire engine.yoir video is super help on finding non visible problems
Good job
Thank you for the video, what to do if there is misfire in one or more cylinders?
grait ifo man ...thanks a lot
Good luck
Does the drive count always stay in the system or does it reset when I delete codes with a scanner tool? What is red flag number for a prius? I keep seeing 1-8 counts in misfire current nothing like the 1300 count you're showing In the video
Hi master wich mode of fast vci you are using with teachstream
Hi sir how I find otc it3 for toyota vci new softwaire new key no
Where is this screen
How to flash Suzuki cars
Sort of have shaky idle on cold start nothing too crazy but current rates all showing 2,5, 7, 6 for a prius. Is this normal or something is going on?
@ukaszb5004
Жыл бұрын
Do you know the answer? What gen of prius?
@priusgame1178
Жыл бұрын
@Łukasz B my problem was badly clogged up fuel injectors. I switched them out with better used ones and it went away. If that doesn't work remove spark plugs and check them out. While doing that try to use a flashlight and look in piston head area to see if the pistons are charred up badly. That normally indicates engine is losing clearance in the piston rings area aka engine is starting to go bad. There's no undoing this issue if engine is slowly going bad so don't try to pay a mechanic extra cash to use a magic chemical to fix it. Final: check fuel injectors, spark plugs, piston heads visual inspection with flashlight
@ukaszb5004
Жыл бұрын
@@priusgame1178 Thank you for reply. My G2 has mileage over 250k km and some misfire problems on idle on random cylinders. I have changed my spark plugs (removed Denso Iridium have only 40k km). Nothing changed. But then I added good fuel additive and it is much better now. Oil consumption is not bad - only about 0.1L for 1000 km. I think I should give fuel additive more time.
@Name-hp2go
4 ай бұрын
Hey, if you still remember what fuel additive you have used? Is it Marvel mystery oil?
I cant see the datalist when i click data list its gives error cx4001
@mikmik4205
2 жыл бұрын
@@Jay-hr9ci how cab we update that have u got firmware ?
@mikmik4205
2 жыл бұрын
@@Jay-hr9ci is it possible to use the bluetooth odb with techstream
@ion_q
2 жыл бұрын
@@mikmik4205 No. Must use obd > usb