That amount of starter fluid for such a small engine made my head hurt.

@WarpedPerception

10 ай бұрын

Lol

@BingBong874

10 ай бұрын

Just gotta send it.

@cammos

10 ай бұрын

Yeah bad could of started a truck with that much😂😂😂

@UltraMagaFan

10 ай бұрын

You’re definitely one of those people that spews out bullshit like “uSiNG StARtER FLUiD wILL RuiN aN eNgINe”.

@MaNNeRz91

10 ай бұрын

Same 😂😂😂 I was curious how it would handle it considering I use about that much to get my old work van going 😂😂😂

Looking forward to seeing how you setup this engine!

@travis.napier

10 ай бұрын

Todd has time to publish his weekly video and make it over here to support a fellow creator. Keep it up!

@2alawabidingcitzen

10 ай бұрын

I was about to say the same thing and I appreciate your last octane video now I can save a few bucks putting supreme in my small engine equipment.

@ejcrashed

10 ай бұрын

V8 gokart please 😊

@josephpacchetti5997

10 ай бұрын

Hello Todd. 😁Me Too.

@simonroberts960

10 ай бұрын

Like the way yiu do things , be good if you mentioned how much it cost as well ... Will be interesting see what you put the v8 into...

The small multiple cylinder engine tests are definitely one of my favorite genre of your videos! Please keep them coming! 👍🏻🇺🇲

@WarpedPerception

10 ай бұрын

It's funny because they're really interesting.

@user-eq3qk7vv9h

6 ай бұрын

Honda's inline 250 4 cyl. Was a screamer in the early 80s too

100% gonna be keeping an eye out for more of this engine. i could never justify getting one for myself so seeing them is the next best thing

@oneanddonetzone3673

2 ай бұрын

I’m in the same boat I really like This kind of stuff building them tweaking them. But holy smokes you can buy a real freaking crate engine for less money

@EdmundSampson-pd7vi

Ай бұрын

Yeah they up around 6 or 7 thousand , not cheap

The chainsaw carb is a good idea size wise but functionally they don't work at all like an automotive carb with a float bowl, chainsaws and other two strokes are meant to run upside down so a float bowl wouldn't work so instead they have a diaphragm that pumps fuel using pulses from the crank case which is opposite of the vacuum pulses in the intake. And with the large constantly changing crankcase pressure in a small V8 there's likely very little pulse to tap into

@WarpedPerception

10 ай бұрын

I think your right

Would be awesome to see this in a scooter

@nicholas_scott

10 ай бұрын

Its interesting. Its the same CC as my scooter 1-cyl engine. It sounds amazing, but I think that its prob not actually built strong enough to last.

@officialmysteriousrider130

10 ай бұрын

V8 powered GOPED was gunner say until I seen your comment

@defaultdriftco00

10 ай бұрын

And supercharged.

@donbrashsux

10 ай бұрын

Or in my Lounge

@stevenjones5226

10 ай бұрын

Razor single seater

Now THAT sounds like a 4-stroke mini engine, unlike so many others on here.

Giving that much ether to a new born engine, is like handing a new born baby a Pack of Marlboro Reds

This would be great in a large RC car. If you have a big block show car, putting this in a 1/3 scale model would be awesome.

@tjkj-om9oi

10 ай бұрын

Would be very underwhelming in a 1/5 scale or 1/4 scale. I have a Taylor RC 80cc Supreme gas engine in 2 of my 1/5 scale RC's and they make something like 28-30hp in a 42lbs and 90lbs RC's. Will spin over 16,000 rpm's also.

@-Grizzly03

10 ай бұрын

Don't confuse an engine's HP with an engine's torque. I'd rather have stump pulling take-off and acceleration over top speed.

@americansmark

10 ай бұрын

@@tjkj-om9oi I just guessed at the scale. Whatever scale these engines are, I guess.

@SLIMOFICATION

10 ай бұрын

Also with a big blower out the hood

@Fred_the_1996

10 ай бұрын

@@tjkj-om9oiJESUS

As always this is just super cool content! Thank you for all the effort you put into the channel!

@WarpedPerception

10 ай бұрын

Thanks and your welcome

Really cool man, looking forward to seeing ore of this, welcome back

43 seconds in and I'm clicking sub. Ain't even heard it yet! Those engines are works of art before they even run! Greetings from Canada!

It would be awesome to install one of those engines on a bicycle. I’ve seen the crazy e-bike and 2-stroke builds but a mini V8 build would be quite unique since I never saw anyone do that before.

@account4info

10 ай бұрын

This was my first thought.

@Pau_Pau9

10 ай бұрын

I just got 4 stroke weed-wacker engine. That's good enough for me!

@strmrbtw2499

10 ай бұрын

That was actually my first thought lmao

That thing sounds so good

Good to see you back man.

Wow, really cool engine! Looking forward to what you have planned!

Bro's the defenition of bling life 😂

@FreddyFunderbunz

10 ай бұрын

That coke dealer vibe

@WarpedPerception

10 ай бұрын

Lol... I like the vibe but I made more money using my skills tbh.

@nerfgodbigguy1405

10 ай бұрын

@@WarpedPerception i mean making a jet car for mr beasts latest video, i have no doubts for you talent ,is there going to be a video on it?

Great job on the latest Mr.beast video! That was awesome 👏

@WarpedPerception

10 ай бұрын

Thanks! It was rough, I didn't have sleep for 3 weeks.

Nice to see you back to making new videos!

I binge watched a few of your videos right now. You definitely gained a sub. 😎 I work on fighter jets and their engines as well in real life as my occupation. Its amazing to see it in miniature form. Edit: fixed typos

this engine is actually extremely efficient for what it is, scaled up to a 454 in displacement if it had the same efficiency it would make around 576 horsepower.

That would make an awesome lawnmower or generator!

@fidelcatsro6948

10 ай бұрын

lets hook that up to a good car alternator and watch the dc energy pour out like rock n roll!

Beautiful...nice vid...can't wait to see what you cook up!

love the new look. welcome back!

@WarpedPerception

10 ай бұрын

Lol thanks!

That's an awesome little engine! I'm sure you can make it far better. AND, that was a wild get up you had on LOL. Full gangsta.

@WarpedPerception

10 ай бұрын

Lol... Thanks

Oh boy the possibilities! RC Car, RC Boat, Scooter, Bicycle, so many options. I think I actually want to buy one of these kits just for the fun of building it and then starting it up. For a mini, it sounds amazing!

@TM450FI

10 ай бұрын

Mounting it on a bicycle with a moped cvt would be insane lmao

@aequitas8749

9 ай бұрын

@@TM450FI , hell yeah, v8 motorcycle.

@WuKuVex

4 ай бұрын

IKR?? Im putting one intio a moped/small motorbike frame!

I'm fascinated by this. Just awesome

Soooo friggin sweet, thanks for the content!

Wow thats a really cool engine! Looking forward to seeing what you will do with it. I'm currently trying to design and cnc my own opposed piston engine from scratch, so these videos are really interesting!

i wanna put one on a mini bike holy hell, at 6 horsepower that's actually a usable engine! and if it does 6 horse at 78cc that's pretty dang good! Looks like it already got a head gasket leak lmfao

@LaidBackDeveloper

10 ай бұрын

It probably doesn’t have much torque.

@volvo09

10 ай бұрын

I doubt it's got 6hp... It would have to scream like a nitro rc car engine to get that. There is no way... If they rated it at 6 it's as honest as all the 1000mah batteries being sold as 9000mah.

@99milesaway41

10 ай бұрын

​@@volvo09Seriously. I dunno though, actual header exhaust, better ignition, better intake and carbs, and run nitro, I'll bet you could something like 6 horses

@butwait

10 ай бұрын

0.6hp maybe, if you're lucky. these things only seem to run right at idle.

@WarpedPerception

10 ай бұрын

We will see

The content I've been waiting for!

@WarpedPerception

10 ай бұрын

Thanks

Glad to see you back. I probablly watched the seethru engine series at least 5 total times

@WarpedPerception

10 ай бұрын

😊... Thanks so much, I need all the help I can get I'm about to launch my channel into a different gear this season

I'd sort that dizzy cap before trying to run it too much. Depending on how much compression those little pistons have could easily do some damage if it's not firing on that one pot. The bowls may not be filling because it needs more pressure. I bought a really good 5psi fuel pump off of eBay for my moped to get rid of the vacuum fed one. If you ran a return line to bleed off 2 or 3 psi like I have the carbs get plenty of pressure and anything it doesn't need goes back to the tank.

How does it sound with some 40 series flowmasters?

I can’t wait. This sounds exciting 😀

Awesome Video !

If you made this video for me why's it takein 9 months for me to see it

please put this on a bicycle!!!!!!!!!!!!!!!!!!

@tonyz6421

2 ай бұрын

They're called motorcycles!

Glad you are back!

@WarpedPerception

10 ай бұрын

Me too, I have a whole backlog of videos right now, I want to just make some cool stuff. I got stuck working on the Tesla all last year then the Mr Beast projects for like the last 8 months. Intense amount of work

Oh man!!! Big thing is coming!!!

Where do you buy these 😅😅😅😅

@AutomotivewithVIDU

Ай бұрын

From sri lanka 🇱🇰 it's handmade my engine

@mikeh5950

Ай бұрын

Stirlingkit or enginediy

It's nice to see an engine large enough to do some real work. If I ever got rich enough to recreate a car, I'd do the cartoon version of Speed Racer's Mach 5, and want to power it with a BRM 1.5 Litre V16 because it sounds like the cartoon Mach 5. While the engine is physically much larger on the outside, the model engine parts may be the right size to help recreate the V16. I'd probably make it a hybrid because the BRM engine was totally unpredictable in making power.

@Fred_the_1996

10 ай бұрын

That V16 sound was heavenly

@natehill8069

10 ай бұрын

The hard part is going to be coming up with a 453-speed manual gearbox. In EVERY SCENE EVER the M5 is going "arrrr-arrrr" and shifting gears. He probably got 3mpg cause he never cruised anywhere, just shifted gears.

Cool love the detail

Congratulations, it is a beauty

Wooow.! Just awesome man.

That thing is pretty cool!

Sweet brass chain boy !

Wow 😮😮😮these miniatures are amazing

Awesome, thank you

I love your videos, thank you for sharing!

@WarpedPerception

10 ай бұрын

Thank you for watching

Awesome!!! That smaller V8 is awesome as well! Chainsaw carbs!! DOHC!!! Amazing! Probably needs 93 octane..maybe, yes? Wow!! Listen to that little beast roar!!! Only a V8 sounds like that!!!

Totally incredible this is really incredible

That engine is beautiful

Very cool!

Wow, now this is a cool engine!

Welcome back!

Wow and still sounds better than any honda. Thank you

When he says he thinks it will surprise us what he's going to do it. I think he means "FORCED INDUCTION" haha but for real, glad to see you with some new videos lined up and still wanna see that LED in action for these videos. More slow-mo!! Thank you and keep it up brother.

@WarpedPerception

10 ай бұрын

I love doing those slow motion videos, and you're right I can't believe you remember the light but it's sitting there collecting dust, I have to put it to work very soon. One of my biggest challenges has been trying to figure out how I can diversify things to make them fit on my channel. But I think I figured it out

@travis.napier

10 ай бұрын

@@WarpedPerception Always good to hear you working up new ideas! I remember the light because I think it's one of the most significant things you've done along with the clear turbine housing. 🤘🤠

That thing sounds SO GOOD 😫😫😫

That's awesome ! 👍

Fantastic

Man I love the engine,

Good to see the crazy man is back..

@WarpedPerception

10 ай бұрын

Hahah.... I nowI feel like I'm on vacation, the last year and a half have been nothing but monumentally challenging projects... And then I was working on a few Mr Beast projects, really tough stuff

I cant make a guess, but I am sure I'm gonna like it!

it sounds awesome

Sounds so neat

the chain and the glasses made me laught 😀 nice one!

An inspiration for a lot of engineers. New and old.

Bro sounds good!

Super cool bro ❤

The engine sound is pure music to my ears

If I had the money or the backing I most definitely star producing a 2.5 litre half scale V8. And I’d bet anything those things would fly off the shelf . Perfect for cross cart racing .

Awesome!

Plastic screws in distributor . We used to paint the inside of the distributor with clear nail polish when they cracked or keep tracking spark lol . Old school trick . Need filter on fuel .... bigger intake trumpets lol

Very cool bro

Awesome mini v8.

Sounds good

super cool!

Really cool !!!!!!

The best DIY engine🎉

Bro, that would be a dope little engine to put in a small kart for fun!

fantastic

Perfect for diy motorcycle

Wow, the v8 baby

That is bad to the bone dude 👍

That was awesome

Need this in my weedwacker. Would go awesome next to my 20hp v-twin push mower.

Love it

oh wow... that one actually sounds good

Cool im down with yur next build

This is wild!!!!

Please push the engine to the limits. But the right and clean way. Would love to see!

first time ive actually seen someone to get it to idle and not just die

What a beast! Put it onto a mower tractor!

That’s wild

you should make a scooter powered by this engine, like one of those electric ones. love it!

Great video. I like the colab with MR BEAST! 👍🏻🇺🇲

@WarpedPerception

10 ай бұрын

Thanks

Damn! That thing sounds nasty

Hahahahaha, the tears in my eyes! This thing is amazing and hilarious!

Great work. That being said loose the gold chain.

@WarpedPerception

8 ай бұрын

Thanks... Why ?