Water pump kind of made me want to see an rc jet drive with a simple sheet aluminum v hull

@justgottasendit8825

3 жыл бұрын

I had the same thought haha! I wanna see that so bad!

@SaltyMcBoatFace

3 жыл бұрын

a £12 bilge pump has more power to be perfectly honest .

@neko7684

3 жыл бұрын

This. This right here.

@tylervanorman492

3 жыл бұрын

Thats what I was thinking!!!

@gunpowderHVA

3 жыл бұрын

1000 times agree

The way he comforts our minds by saying about the 4 cylinder rc car😂

The day this man makes a miniature 2 jz is the day I create 2 million Gmail accounts and start subbing

@djaydeved

3 жыл бұрын

ikr when the mini 2j comes out which can rev to 20k will be the day i start doin shit

@Elias_Harrison

2 жыл бұрын

@@djaydeved yes

3:30 as one of the best ASMR machining channels on YT, that was the most satisfying sound

@TheSimpsoys

3 жыл бұрын

The opposite of this sound 5:13

@joshuamitch22

3 жыл бұрын

@@TheSimpsoys true

This has to be the most realistic RC engine I've heard so far.

Amazing output for such a small pump. Great to watch as always 😃.

"You want something to drink?" "Yeah glass of water please" *engine revving*

@VenturiLife

3 жыл бұрын

haha

Hello to the cat !!! A the dog that's always barking in the background.

This engine is really beautiful, I am waiting for mine to arrive! But I noticed that it heats up a lot, but this one works well! I have a 16 MB that I will publish soon, this barely works, but after 3 weeks of dismantling the engine and making corrections, the engine reached 10k rpm.

@Farmtractor

3 жыл бұрын

Leandro! When it arrives I would love to see it run!

@ManualdoMotorStirling

3 жыл бұрын

@@Farmtractor My engine has just arrived, I will only have time to test it tomorrow. Here it is getting dark now, and I intend to stay up all night making video recordings of the engine before starting. I just thought that the steering wheel turns very heavy, but very heavy, I am not talking about compression, I will see if the piston is lubricated. Compression then doesn't even speak, a lot of compression, I almost couldn't beat the compression with my fingers. Leandro.

@Farmtractor

3 жыл бұрын

@@ManualdoMotorStirling give me a link or make it public please! I’m very exited to see them!

@ManualdoMotorStirling

3 жыл бұрын

@@Farmtractor As soon as I have a video, I send you a link, I’m analyzing it, it’s very beautiful. I disassembled the side where the accelerator is, there are 6 gears, just like a real engine, it is lubricated with grease, and when I removed the cover, it had a high temperature glue for sealing in gray, I believe that when the engine heat up, the grease will melt and there will be grease leaks, but not because of the manufacturer, I shouldn't have removed the cover, but I will make a video showing how it is inside and what should not be done. The accelerator is perfect, when you accelerate, the needle moves along, like a real carburetor, this is not the case with the MB 16 model.

@Farmtractor

3 жыл бұрын

@@ManualdoMotorStirling that sounds really good! Im debating on getting 2 engines (brass m12 and hit and miss), or one cison! I think I may go with the cison! Let me know! Also, what does the manual say?

I saw you screw it together and went "What, no gasket? That mad lad!" ...and it leaked. Yeah, absolutely need to add one of some kind. Easy enough with some RTV gasket maker or similar. Pretty cool build!

Imagine using this to pump your yard when it floods during a storm 😆

Now the cat at the end will for sure bring in more people to subscribe lol

@John-E

3 жыл бұрын

Just an FYI I recently read. Cats usually won't drink from a bucket, pool of water, etc. Reason is they fear the water will be stagnate. (Tell that to my 3 cats that drink from a open tea pot always on the stove....lol...)

@bryanbaker6767

3 жыл бұрын

Hmmmm...... kind of makes sense why my cat won't drink from anything but a running faucet... No joke she really will not drink out of a bowl

@Kineth1

3 жыл бұрын

Wait, he found a catalytic converter sized for a 3.5cc engine? ...Oh, that kind of cat. I forgot that the internet always ends in cats.

@williamkeith8944

3 жыл бұрын

@@John-E depends on the cats experience. If all they ever experience from kittenhood is clean water in a bowl they see their trusted human fill, that's what they drink.

@John-E

3 жыл бұрын

@@williamkeith8944 Absolutely correct. Key word here is Kitten-hood. If raised from a kitten they'll trust their owner to give clean water in a bowl. (But I'm still trying to figure out the tea pot..) :-)

Can this be used to water cool my GPU?

@djaydeved

3 жыл бұрын

posibly, though i'd advise routing the exaust out of your house

@rsharney1111

3 жыл бұрын

I'd use a brushless motor and some TEC's on the radiator. I'd bet you'd never use its full cooling potential.

@djsid01

3 жыл бұрын

lol i dont want that loud engine in my room when i play a game xD

@JacobTheGunNut

3 жыл бұрын

Your computer can be the ECU for the engine too!

@TheHungrySlug

3 жыл бұрын

Yes, If you really wanted too, than yes. After all, why not over engineer anything and everything? But a $15 pond fountain pump would probably be Too easy to do.

Always amazed and calmed by your builds, it's truly inspirational!

That's a really awesome motor! And absolutely amazing craftsmanship as always. Thank you for always sharing your projects they are an inspiration to me. Many blessings to you 🙏

Impressive volume for a tiny pump. Thumbs up.

the machining of the water turbine is pure craftsmanship, gorgeous

Now use the pump for some high pressure engine water cooling. (:

Seeing you make that impeller size of a penny was just pure art!

Wow!! Simply amazing.. that lil engine and water pump Dayummm… perfection 👍

That's a really good flow, well done!

Welcome back Johnny!

that engine sounds awesome

Beautiful work! Beautiful kitty!

Some very good water pressure form that little pump.

That engine sounds great actually

Also das ganze mit einem E-Motor und Solarpanel mit Akku wäre wesentlich umweltfreundlicher als der kleine Stinker, vor allem wesentlich leiser!! Die Arbeit mit der Pumpe ist super toll

When I saw your cat drink from the bucket the only thought I could come up with was TOOL TIME! A man's gas power cat fountain LOL! That's a awesome little engine.

This engine sounds good and even better without the silencer, also the cat is happy as well so it was a great video and looking forward to the next project.

The impeller was very pretty. Nice job on the pump. A little silicone on the housing and you can get that shaft leaking I promise! 😉 really cool build. Your craftsmanship is very good.

I really love the water pump idea

This Engine slightly resembles like Front Half of a Tractor without wheels

Oooh perfect for my next stealthy hydroponics set up :D

Very cool engine!! You have to put it on an RC car!!

Thank you for measuring the flow rate. I really enjoy your to-the-point video format. I wonder what sort of head you are able to get with that setup. I bet it is decent.

this is a really good little project. a little idea. you can see the engine cooling water either boiling up or frothing up over the square hole causing an unsightly mess, could you make or 3D print a lid or sealed water jacket for the engine with an inlet and outlet and then pass some of the cold water thats getting pumped through that water jacket? keep up the good work sir.

This is wonderful. Now use it as an industrial water gun.

That engine purrs like a kitten...

Itd be pretty cool to see more rotary engine videos

Now with that pump a proper water cooling system ☺

If I used this as a water pump for my laser cutter's cooling loop, I'd finally have something to drown out the noise of the exhaust fan. 😏

@michaelbissoon1427

3 жыл бұрын

Life hack

@jawanabagana6257

3 жыл бұрын

Berapa beli mesin mini kayak itu mas

What a beautiful rotor :)

Man that desktop cnc is so awesome.

Always a Pleasure. thanks Johnny 👍🏻

My fridge when i get water at 3AM

this is not just a technical mthode, this is metal art, super great

Your precision is second to none,always amazed at your projects.. cheers

I love your projects, very inspiring!!!

I clicked on the notification instantly when i saw it was Johnny🥶🥶

I LOVE the sound it makes

I’d like to see the miniature gasoline engine water pump be used to cool a bigger gasoline engine

Johnny all I can say about you bruh is that you're a genius without any PhD or Dctorates in any type of mechanical engineering!! You're a born genius!! 👌👌👌

Engine sounds good!

Pretty amazing tool work.

Great way to start my day! Thanks!

The sound of the engine is gorgeous! From it you need to make a model of a cultivator or walk-behind tractor)

@kornaros96

3 жыл бұрын

Yeah a Minotavros vehicle

Great job on the water pump! I clicked the engine link and fell off my chair when I saw the price. I could by a full size V8 from the wreckers for that much!

WE LOVE JonnyQ90!!! Excellence is the way!!!

Ever since the first time I saw the Pocket NC 5-axis desktop milling machine I have wanted a miniature Chevy 5.7L/350 smallblock identical to the one made by the two guys doing the crowdfunding at the start of their project. I've been hooked on CNC shop tool videos ever since!

Decent amount of water pressure at full throttle not bad!

YEEEEEEES. We need more cat shots

That was an example of running (to your right side) all the way around the world to get two steps to your left from your original position on the planet. There are much cheaper, easier, and more efficient ways to accomplish pumping water but you chose to do it the hard way. PS: I know it's just to sell stuff online and get kickbacks so I get it.

what i have learned from this channel and lpl... when u got skills we dont even care what you look like.. we wana see what you can do :D

Really cool video🤩 always love watching the tiny engine videos

Interesting little engine. Looks like it needs a proper cooling system. You should probably take it apart and see if you can make improvements.

you sir, are a master at your craft and it is always a thrill to watch your videos

Nice impeller, a little inefficient but good looks clean!

Sounds 100 times better than 98% of mopeds

That's incredible

Of course the cat came to drink from that bucket XD So you'd need to make some modifications, like the screws sealing and a funnel or something to prevent cooling water from jumping out of the engine :D

mini pump with mini engine for putting out mini fires xd

I love how you showed your cat drinking out of that water. It shows you only put clean water through it.

Pretty neat ♥️ & satisfying 😍

I would love to see some more of the process here. Drawings or screenshots of the CAD files etc. Some of the steps you take in creating these.

Now I wanna buy a engine to mess around or when am bored and just wanna rev it up lol

Going to use this for my aquarium

I like your work master. You're master of the engineer Johnny...

I believe that "output" you ran the pump with is actually used for a hand starting crank on the full sized engines

Another awesome video 👍

Soo beautiful and smooth :) but daamn about the exhaust pot 😀 you win some and lose some 😉

Nice......Now try making a miniature Tesla bladeless turbine pump for it.

I want to see a watercooled engine with an engine powered water pump

Love that they based the design on the Chinese horizontal Diesel engines. It even kind of sounds like it. I have the 3 hp diesel and immediately recognized this design

You know it's a tight fit when the teflon squeaks like that

I could go electric motor, pump, motorcycle battery, one solar panel to keep battery charged. BUT SMALL GAS ENGINES ARE SO DAMN COOL! Lol

so thats why starting a lawnmower and starting a car sounds different

Now make well in the ground for this setup :)

The engine is so cool

If there is a lake or pond near you I'd like to see one of these engines in a boat and I have no doubt the fun you'll have making different propellers!

Sound is like a Dodge Charger V8😄

Beautiful video 👍

nothing is more frustrating than missing johnny‘s new video by 4 days

Great job, my friend, and this is a nice engine. Greetings and good day to you

Well done 😀👍

Modify the pump to make a super charger 😁

Ok.. some people just amaze the shit out of me! Did you make that engine!!?? That is so insane! I have one of those changfa diesels. I never thought I'd see someone make a mini replica of one! That's so insane!! Really neat setup! 😄

I wish I had that kind of talent

Props for the cat. Please show it more ! :)

@Pithead

3 жыл бұрын

Cat vidz!

He's a good cat, he's a pretty cat

I'd love to see a mini diesel