the shroud and overall shape of the engine reminds me of an old briggs and a old kohler

@MadScientist267

4 ай бұрын

Yeah I'm like "where's the rest of the go kart" 🤣

Now it needs a homemade style go cart to run in

@AJRestoration

4 ай бұрын

That could be a cool idea!

@FlyinBrian777

4 ай бұрын

I thought that too, but good luck finding a small enough centrifugal clutch.

Great video. You did a good turning it into a little project. I was hoping you would put a muffler it so it was satisfying to see you slip that in at the end there. Like to see if you can come up with a unique use for it. 👏👏👏

Greatlittle engine. Like the way the pushrods cross over themselves.

seriously ...that was more relaxing than a bong hit....

@AJRestoration

4 ай бұрын

Hahaha that is good to hear!

Really nice set-up. When I saw that muffler, I said I hope that is silver solder! I guess it wasn't. Even silver solder may not take the heat. Anyway that is a wonderful thing.

Everyone has this printer I swear :) great starting point, auto leveling on newer models really help tremendously

@AJRestoration

4 ай бұрын

Yes haha, every beginner has or had this printer. I want to upgrade to an auto bed leveling printer, I hate the manual bed leveling, to be honest.

@spencer963

4 ай бұрын

@@AJRestoration consider the any cubic neo, I happened across it when it was for sale on Amazon for $130, I've auto leveled it about 3 months ago and haven't since. I probably do at least one print a day, if a print fails it usually is my own fault by putting in faulty print settings. Been a super reliable printer for me, day and night difference in quality.

When the solder melted on the muffler and it fell apart... my first thought was it must be a Ford OEM part. ;) My guess is that the muffler was assembled using electrical solder (melting point around 370F) instead of silver solder which has a melting point from 1200F to 1750F depending on which type is used.

@AJRestoration

4 ай бұрын

Haha It could be a Ford OEM part haha. Yes it was just normal solder, I plan on doing it with silver solder or brazing, I am investing in a brazing kit and I will redo the mini muffler.

Outstanding work 👏👏

@AJRestoration

5 ай бұрын

Thanks a lot 😊

that is beautiful engine

That’s is soooo sweeet love it great video great build 💪

@AJRestoration

4 ай бұрын

Glad you like it, more to come!

Would be neat if you made a micro recoil starter for it.

thats so cool . ima fan of tiny motors engines etc.

@AJRestoration

4 ай бұрын

I have another cool one coming up.

It will only drive one thing And that’s my wife It’ll drive her crazy ❤

I enjoyed it!

Vraiment sympathique vidéo 🙂

Oh the sound.😊

@AJRestoration

4 ай бұрын

Perfection! haha

Very interesting and great video🥰👏👏👏

Nice, now you need 4 insolator dampers mounts for vabration...

@AJRestoration

4 ай бұрын

I wonder if one could find dampers so small.

Sounds sweet.

101K subscribers!! well done :D :D

@AJRestoration

4 ай бұрын

🎉🎉🎉🎉

Creditable Dyffryn freesia 2nd cycle is retrofit but nice engine

aThis motor is so cool...But thought might be complete assembly. i want one and have seen video..

@AJRestoration

2 ай бұрын

It's exceptional build quality. I had so much fun with it.

Need to use silver solder if you want your exhaust to stay together.just fyi.

@AJRestoration

4 ай бұрын

Correct I do plan on redoing it but properly.

Super cool

Here you go ....FPVDrone M3 Flight Controller Anti-Vibration Standoffs Fixed Screws Soft Mounting Hardware with Rubber Washer Rings for Naze32 CC3D F3 F4(12Sets)

@AJRestoration

4 ай бұрын

Legend, thank you.

I wonder how it would sound if you used dual pipes on the exhaust????....🤔😁 Like a Harley maybe??...🧐😎👍

@AJRestoration

4 ай бұрын

I bet it would sound pretty great!

I fell asleep, when I woke up he was still taking the ingition unit out of the plastic bag just like he was when i went to sleep.

@AJRestoration

4 ай бұрын

Glad I could help you figure out how to pause the video. ;-)

@thomaslemay8817

4 ай бұрын

@@AJRestoration lollollollol

I’ve got an Ender 3D printer. What program do you use to make your products?

Running it a bit lean but really cool creation.

I use this insulators for my rc helicoter fuselages..

@AJRestoration

4 ай бұрын

Do you have a ebay link or something? I'd like to see what it looks like

i was expecting a fake dc motor-driven model, but this is the real deal!

@AJRestoration

4 ай бұрын

Oh no haha I would never do that to you guys.

I have one of those in real life not sure if it starts any more

I knew that solder was going to melt. Try brass..

@AJRestoration

4 ай бұрын

I don't have the right equipment for brass or silver solder yet, I will invest in it for the future.

The front of the engine blower housing has me stumped on what style of classic engine it's made to.look like

@CoryHorton836

5 ай бұрын

I think it's supposed to be a Nelson brothers sattley engine.

@AJRestoration

5 ай бұрын

I just googled Nelson brothers sattley engine and I agree it does look like its similar. Also first time I saw one of those engines, would love to own one someday.

@robertmailhos8159

5 ай бұрын

@@AJRestoration one of these days you.will find one for the right price

@alexblough5739

5 ай бұрын

Definitely a Briggs and Stratton fh

@robertmailhos8159

5 ай бұрын

@@alexblough5739 thank you for the info on this video on this engine blower housing

I really enjoyed watching you open the cardboard box at the start, I've never seen anybody open a cardboard box before.

@AJRestoration

4 ай бұрын

Aw yeah! I'll do it every time then hahaha I'll tag you so you don't miss it. 🙂

I think i have found a life sized version of that engine sitting in the dirt😅

Good morning from Southeast South Dakota AJ. Dam KZread been messing with me. Dam keyboard keeps freezing up

@Austeration

5 ай бұрын

Mine does the same every time I try to comment then 15 seconds later it works

@waterlife.1905

5 ай бұрын

​@@Austerationsame here. Question, are you by any chance a Republican? If you get my drift....

Fantasies AJ, groot pret my friend

@AJRestoration

5 ай бұрын

Baie dankie, dis vet pret haha

I would’ve already lost every one of those tiny nuts and screws

@AJRestoration

4 ай бұрын

I almost did, had to crawl the floor with a magnet.

well done...conversion to electric start next and a full water cooled radiator and water pump :)

@AJRestoration

4 ай бұрын

That would be awesome.

@tonywright8294

Ай бұрын

Why ?

Hook a small motor to it and use it as a generator.

@AJRestoration

4 ай бұрын

I have a video like that planned.

❤

Do these produce the electricity needed to run? Alternator/stator etc?

@AJRestoration

4 ай бұрын

Yes, the company does sell mini generators that you can hook up to generate electricity. You can also make one-off a small dc motor. I have a video planned on this topic.

I was going to buy that from engine diy😂

@AJRestoration

5 ай бұрын

Feel free to use the links in the video and my discount code!

Now put it on dyno !!

@AJRestoration

4 ай бұрын

Haha that could be cool, but I have no Idea how to dyno something like this.

@tonywright8294

Ай бұрын

Why ?

Nice 😎😎😎👍👍👍

Lekker ding

@AJRestoration

4 ай бұрын

Absoluut haha

Time for actual silver solder... LOL.

@AJRestoration

5 ай бұрын

Correct hahaha

Very nice work A.J... did you get better throttle response with or without the muffler?Turned out beautiful...

@AJRestoration

5 ай бұрын

It was basically the same.

Really Great Video, I only wish you had made the stand out of a very nice piece of REAL timber! preferably with lots of grain showing!

@tonywright8294

4 ай бұрын

Why ?

Idea Sir. Figure out a generator set up to run off yer 4 stroke to be able to charge your phone-etc.

@slimwantedman6694

5 ай бұрын

Maybe use like one of those wind-up style flash lights.

Run a generator with it and use it to run a model train.

@AJRestoration

4 ай бұрын

I want to try and hook a little dc motor for a generator and a few LED's

We're we supposed to read that instruction book since a cat seems to have a hold of your tongue?

@AJRestoration

4 ай бұрын

The cat always has my tongue haha. No its just a little preview, some guys like it.

It starts, now what?

bonjour monsieur sur quel site peut on trouver se petit moteur cordialement

Starting engine at 8:58. All before is bullsiting.

@AJRestoration

4 ай бұрын

Thank you for pointing that out haha, wanna skip all the other bullshit.

Love the tiny muffler. Now you need to make it into an itty bitty generator.

@tonywright8294

4 ай бұрын

Why ?

Would be smart to mount the engine down first

It would want to be cheap because someone else has had the fun of building it 😢

villiers

If you move a bit more slowly you will stop altogether!

@AJRestoration

4 ай бұрын

Is that a challenge?

@Indigenous51

4 ай бұрын

@@AJRestoration😂

Cute little engine, dumb wordless unboxing and assembly.

@AJRestoration

4 ай бұрын

Wordless is my thing if you want words there are many videos out there that has words ;-)

amazon

Мда.... Даже коробку правильно откры проблема.... Остальное того же уровня.

What is the point?

@shop970

4 ай бұрын

A working model ICE . . . .

@AJRestoration

4 ай бұрын

If you have to ask, you would not understand.

@borna430

Ай бұрын

Running a miniature gas engine allows for the observation and study of internal combustion engine principles on a smaller, more manageable scale. It provides a practical understanding of thermodynamics, fluid dynamics, and mechanical engineering. By examining the performance and behavior of the engine, one can gain insights into the efficiency of combustion processes, the mechanics of reciprocating engines, and the optimization of fuel-air mixtures. This hands-on experience is invaluable for both educational purposes and for fostering a deeper appreciation of the complexities involved in engine design and operation. Did I say enough?

🥶✊🏻🇷🇺

China is making all our dreams come throu

@KevinCoop1

4 ай бұрын

Did you not go to the link? Definately not Chinese!

Clinton

@AJRestoration

4 ай бұрын

It does resemble a Clinton I agree.

مرث

Learn flux my fellow hobbyist

@AJRestoration

4 ай бұрын

I have to! I did some research and it looks easy enough to learn.

@jhrubicon1470

4 ай бұрын

@@AJRestoration Super easy to learn and makes your solder joints so much better.

carburalo meglio

over priced item

@AJRestoration

4 ай бұрын

I actually don't think so. If you take into consideration all the engineering and the quality of the small parts its well worth the money.

Ну готовый то двигатель запустить каждый может. А ты попробуй сам его сделай

@AJRestoration

4 ай бұрын

Я ни в коем случае не смогу сделать это сам, здесь нужно много инженерных решений, а я слишком туп для этого. Может разобрать его и собрать заново, а не делать с нуля, может тогда можно будет видео по нему снять. Это было бы прекрасно.