Mini Jet Boat Build | Part 5 | Jetstream 12' Buccaneer
Автокөліктер мен көлік құралдары
In this episode of the Jetstream Mini Jetboat build we tear apart the 2012 Seadoo RXP 260 hp and start installing it into the fully welded hull. From making motor mounts to aligning the engine, working on the plumbing for all the water and coolant lines going to the intercooler, heat exchanger and exhaust manifold. Finish floor bracing and start working and welding up the helm. Using a Miller 220 Multimatic running Tig and Mig welding.
This kit is going to be a total of 14 feet overall length with swim grid, 4 seater engine cover, 1/4" hull, 1/8" sides, full 1/2" UHMW on bottom and side chines, lexan walk through front window, powered by Seadoo 260 horsepower Supercharged rotax motor.
Be sure to check out part 6 where we finish the build!
And be sure to check out Jetstream Adventure Boats!
www.jetstreamboats.com
Filmed with Gopro
Minijet boating boats jetboat jetboating seadoo 260 supercharger river white water inc custom diy do it yourself boat builders tik tok welding welder weld mig Tig miller 220 spool gun 150 aluminum metal work 4 seater
Пікірлер: 46
Out of all the videos, you go the most in depth and show everything you do.. props to you man! 👏
@LoganPehota
2 жыл бұрын
Thanks buddy appreciate it
@OurbabyhoodVlog
Жыл бұрын
@@LoganPehota how much is this price brother?
@LoganPehota
3 ай бұрын
@@OurbabyhoodVlog 30grand
Looking to pick up the 10’. I’m here in Horseshoe Bend Idaho. Love the Payette River
Looks great. Nice job
Awesome job to you and the fam. Really enjoyable watching.
That's awesome can't wait to see the the first trials.
Been thinking about doing one of these but never welded alu so Im chicken lol Very cool build you have going!
@LoganPehota
2 жыл бұрын
We had never welded aluminum before either, bit of a learning process
Great series so far!
dude thanks for posting this, so much good info in this series!
Very good job!
Great welding!
@LoganPehota
2 жыл бұрын
thanks man
Nice work man. I’ll be starting one shortly. By chance do you remember the tube size in the intake you ordered
Looks good man! I’m looking at ordering a hull this month. Just trying to figure out which brand to buy!
@krisverzwyvelt1212
2 жыл бұрын
Jet stream is the way to go💯💯💯
@ScoobieMonkey
2 жыл бұрын
Moto Jet* has really been a great design as well, looking to order one within the next year!
Hey Logan. Do you know what grade the aluminum they use . Just wondering for filler material
How many hours do you figure you have in the build? How much of that is welding and grinding time? Thanks for the great video!
@LoganPehota
2 жыл бұрын
Too many... if your competent welder you could finish the hull in a week, and the rest really depends how close you pay attention to the details. Over all for us I'd say we've put like 500 hours in maybe, hard to say for sure
@ResearchDesignBuild
2 жыл бұрын
@@LoganPehota Thanks Logan. Can't wait to clear off a few other project in my garage so I can get one of these kits ordered!
Are you using a miller multimatic 220, I bought one and have trouble getting mine set right,for my boat build. what settings are you using for 1/8 and 1/4 and what wire? Thanks boat looks awesome!!
Howd you do the ibr delete? Im currently in the middle of the same exact build just trying to figure out the ibr delete and manual reverse bucket?
Question for you. Do the brass auto bilge and water inlet fittings thread into your pump adapter plate?
@LoganPehota
4 ай бұрын
Had to tap them
Where did you get the door hinges?
Please please please tell me where you got the fuel pump flange for the fuel cell. Need to get my hands on one for this 10ft model I'm building!?
Hey Logan. When you were setting the carbon ring seal how much pressure would you say was put on it with the bellow. The donor ski I got was already ripped apart so I’m un aware of the factory set up. Thanks man. Your build is awesome
@LoganPehota
2 жыл бұрын
I wish I had an answer for you but we also aren't super sure. I just squeezed it pretty hard with booth hands and got him to tighten it for me
@markmontgomery6734
2 жыл бұрын
@@LoganPehota ok awesome. I just didn’t want to cut the aluminum to short but I guess there’s some room to play with it on there. Thanks for getting back to me man it really helps
I wonder if you can buy the hull already welded and assemble the rest yourself.
@LoganPehota
Жыл бұрын
you can
if use took the intake off the engine there would of been heaps of room to remove it
Why can I not find the first video of the series?
Would it be cheaper to just buy just the motor vs a sea doo and trailer ?
@LoganPehota
3 ай бұрын
Hard to say, try PowerPlants R Us
Im hoping you see this but I have the same setup as you. You obviously took apart the IBR bucket and arm (which is hull mounted) and then later on I see you had a limp mode from having it disconnected. How did you fix that? and I also see that you're using a different bucket/steering nozzle?
@LoganPehota
2 жыл бұрын
Hey man, yeah the stock bucket ibr system from the seadoo just wasn't going to work for us so we deleted it and had to get a "DashPac IBR DELETE FOR ALL SUPERCHARGED SEA DOO IBR SKIS" from 4tec-performance. And then also just ordered a regular nozzle and bucket set up from eBay
@jeremymastin7005
2 жыл бұрын
@@LoganPehota Thanks for the response! Ive been watching your series on repeat...helped alot. I'm sure I'll have more little odd questions for ya if you don't mind 🤣👍🏼
What spool gun did you use ?
@LoganPehota
Жыл бұрын
spool mate 150. .035 4043 wire
can i buying engine only in shop? what name?