Amazing review. Perfect and to the point. Battery knowledge 101 👍💯

You should put a link to the video you mentioned at the beginning of this video, because I checked your videos and I couldn't find the one you were referring to

i have a bosch impact drill 25618 and both bartteries that came with it was bat612 and they don't work at all and i don't understand why. i had it going on 3 years and i only use it once and i never charged them so i heard the battery died and the other one stays with 3 bars showing. so i want to purchase a high output battery for my impact drill

YESSIR, I'll get on buying those 44 batteries right away! _shakes out wallet_ ...um, can I buy the first one on installment?

matt, the recommendation you typed in the m18 vid is for the m12 vid :)

where is the video he spoke of, that has battery tips in it. Thanks

Xc 5 is 18650 and the xc6.0 high output is the 21700 I think torque test chanel has a video taking them apart or something great video btw were all a bunch of Milwaukee fan boys lol but they are the best imo

I'm looking at the CP 3.0 I have a regular and rapid charger so running 4 of them for my driver and drill I have more than enough power for the day. However I have two 4.0, two 5.0 and an 8.0 which I just bought yesterday for my compact vacuum and the packout radio but I really want a few 12.0 batteries.

The cp2.0 is way underrated. It is light, compact and perfectly adequate for 80% of what even pros do with their Milwaukee tools. When it comes to an impact driver, oscillating tool, even a mid torque impact wrench, I’d rather use a lighter battery that I have to change every 2 hours instead of a 5ah I have to change every 5 hours.

I'd like a mains powered battery with a cord, so I could use my cordless tool as a 110v mains tool.

The 6.0 HO batteries also dump energy better than the 8.0.

@mysticjedi6730

9 ай бұрын

Big enough for larger tools, small enough for smaller tools to be lighter and handy.. Still a place for small battery or m12 stuff for installing plugs or something.. or having lighter drill in belt holster, etc..

In the beginning you spoke of correctly charging batteries. So why would you recommend wrecking them with a supercharger or rapid charger? Really? Wow

High output 6.0 has the highest punch Samsung 30T cells are used in them, which has discharge rate up to 45 amp where as 8.0 and 12.0 uses Samsung 40T cells can barely handle 30 Amp discharge when you see Milwaukee, they need to improve their board especially those xc 5 and hd 9 the 21700 version has a better protection i repair batteries and see enough of one that can be fixed easily while they have to be sent to recycle Milwaukee can save a lot of $$ even brand new batteries

@perrybeede9498

2 жыл бұрын

Good info. I did not know this

@americafirst6016

Жыл бұрын

The 3.0 has the 30T as well, the 3.0 and 6.0 HO and the XC 5.0 are the only ones worth it

@TranTek

Жыл бұрын

@@americafirst6016 actually those XC 4.0 is one of very reliable as well Samsung 20R are used in them which you can find them in M12 CP2.0 and M12 XC 4.0, they are like a tank

@americafirst6016

Жыл бұрын

@@TranTek oh I know, tried and true but the HO’s just work better imo

I didn’t have to watch this video to know he would tell you to buy the most expensive option 😂

@skylinemusik1

2 жыл бұрын

😂

Hah, yeah, the ‘reason’ you see the 5.0 in all the ads, and such as you state, is because the 5.0 is what they make their money off of. It’s a solid battery, don’t get me wrong, but you’re falling into the bigger is better mindset. Like ‘Classic Cut Garage’ mentions below, a smaller battery has it’s place. Now I have EVERY Ah battery Milwaukee makes, from the lowly 1.5, on up to the 12.0 HD battery. I love my M18 Surge, and it runs just fine on the 1.5, or preferably the 2.0. Compact and lightweight, when I’m working in confined or overhead spaces. The CP 3.0 with 21700 cells mates up nicely with the Surge. It is quite a good battery. My Favs would have to be the H.O. 8.0/6.0 batteries. YMMV. Peace 👍

@michaelgoodwin5162

Жыл бұрын

I agree, I bought the Surge when they first came out. Always go to it first over my other impacts. I disagree with the 2.0 hate. Very good battery when paired with the appropriate tool.

@brendenperry3770

Жыл бұрын

@@michaelgoodwin5162the 2.0 works well on the brushless 1/4” impact, on the gen 3 fuel hammer drill, not so much, it eats through it and makes it very hot

@americafirst6016

Жыл бұрын

8.0 HO and 12.0 HO are shit stick with the 3.0 and 6.0.

@Dunkdamonk

Жыл бұрын

@@americafirst6016 yeah I've only got 2 xc 5 left. Used to have 6 of them. Rotating them out with the cp3 and 6. The 3s are better than the 5, and I only use the 5s now for hard work like rotary hammer, concrete chipping, compressor, where they get abused for 8 hrs straight