Some people will never understand how satisfying this is to watch

@mtadave6702

Жыл бұрын

Only everyone who watches 😆

Mind blowing stuff....and I am a retired machinist. ONE mistake = scrap. Excellent craftsmanship on your part and like the others, I eagerly awiat Part 2. Good luck and, Cheers.

@jonross377

5 жыл бұрын

You were a machinist huh? I see concentricity mistakes, do you not?

@thelamb288

5 жыл бұрын

@@jonross377 You always get that with 3 Jaw self centering chucks using hard jaws. Costs a bomb to stock lote of different softjaw sets. Are you slagging the workmanship or something?

@Make-Asylums-Great-Again

5 жыл бұрын

The Lamb I like big words.

@diGritz1

5 жыл бұрын

I always thought it was 1 mistake= What? That's not an amendment to the blueprint but a coffee stain? On a side note, after 30+ years as a machinist I can say if 1 mistake = scrape your tolerances are to tight.

@Broadpaw_Fox

5 жыл бұрын

@@diGritz1 - in regards to this particular project. I believe that's why he said "1 mistake = scrap". The parts for this are so small that 'tolerances' is almost a joke word... ;) Extreme precision, indeed...

You're one of my favorite youtubers, I always watch your videos directly when I see them, you do amazing work, and should get a lot more credit for the stuff you do. Keep up the great work, and never give up on that thing!!

Oh my good god. You are a master now of the 5 axis machine. That supercharger housing looks beautiful so far.

The amount of planning for all the sequential steps and the math involved for this kind of project are mind blowing. Great job JQ90.

This is so beautiful. the amount of time and effort gone into this one part alone would make it cost a small fortune to buy

@kricketflyd111

5 жыл бұрын

I worked at a gov. machine facility and yes that would cost a lot in the shop I was in, probably about 50k.

@ichoozjc

5 жыл бұрын

@@kricketflyd111 Because there would be a team of 50 people on this part. Proves that government departments are seriously overstaffed.

@themanthemyththelegend1392

5 жыл бұрын

Lol no dude CNC is so prevalent today. We are not talking about 1978 @@kricketflyd111

@adambrown2626

5 жыл бұрын

It’s not for sale....

@freelectron2029

5 жыл бұрын

yes but you could spend the same time machining a cast and make 100 instead of one in a similar time. still requires a bit of clean up but he has the skills and machinery to do it

Impressive bro, I’ve been a machinist for 25 years and I still learned a few new things watching you machine. Hats off!

Holy molly, I'm really excited for part 2

@thoumasyt8127

5 жыл бұрын

Me too ^^

@LEGOBubuS

5 жыл бұрын

Oh Yeah, Baby!!! =)

@castin5244

5 жыл бұрын

Be prepared to wait 7 months lol

@2810Mad

5 жыл бұрын

@@castin5244 yeah I thought so as well

@KalLanPIDT

5 жыл бұрын

@@castin5244 as if we're just sitting here hitting refresh on youtube to wait for the video to pop up.

Are we going to collab so I can put it on the See Thru Rotary Engine?. Awesome work Johnny !

@derpyfish0179

5 жыл бұрын

Warped Perception 😬

@jamescrawford1534

3 жыл бұрын

This I would love to see👍

@snowjohn1298

3 жыл бұрын

So has this happend yet

Love watching your vids! Everything you make is amazing

@jameswyatt1304

4 жыл бұрын

Could not have said it better on both points!

That little 5 axis cnc is awesome!

@jamesmerritt5562

5 жыл бұрын

It is nice, isnt it? I thought, "wow, I gotta get one of those". Then I saw the US $5500 price tag. And that's the cheaper one!

RC Wankel Rotary Engine? At this level of precision? - Subscribed.

@enallane5538

5 жыл бұрын

same

@Akaunbot66982

3 жыл бұрын

@@enallane5538 YOUTiber

@enallane5538

3 жыл бұрын

@@Akaunbot66982 what?

Piston euhm... i mean rotary head ASMR lol. Truly amazing work Johnny!!!! The details are outstanding on your work!!👌👍

Love your videos, I get so excited when I get a notification for your videos. Quick suggestion/request, maybe use this as a base for a micro gas turbine engine.

@EnglishTurbines

5 жыл бұрын

Do you have any idea how ridiculous that suggestion of yours is...? A Micro Turbojet with wheels this size?...seriously..?...lol.

@thefoundryroom8726

2 жыл бұрын

How cool would it be to turn one of these into a jet engine like collin furze? You'd have to build a "hot side" for it, but it could be done I'm sure.

I've done a little machine work and fab on boats, Harley's, and Hot Rods...but this blows my mind and I'm hooked on your videos!

You really love small fast spinning things

incredible machine work Johnny! look forward to part 2 :)

worlds smallest procharger, cant wait to see this on 1320video

@vladimirlucifer4566

5 жыл бұрын

Procharger is a brand, baka. Centrifugal supercharger is what that thing is...

@Make-Asylums-Great-Again

5 жыл бұрын

Vladimir Lucifer you know what he meant, stop being a pain.

@vladimirlucifer4566

5 жыл бұрын

@@Make-Asylums-Great-Again Being a pain is my specialty.

@sethh8892

5 жыл бұрын

@@Make-Asylums-Great-Again Breaking news: ITT we learn that correcting someone that got something wrong is bad, and we should continue to let them be ignorant on said subject.

@BigCroca

5 жыл бұрын

cant wait to put it on my civic

Omg I was in awe throughout the entire show mate!! True work of art! It’s a masterpiece! Thank you for sharing!

This is off the chain, amazing what can be done with small lathe and mill. One of your best to date.

that compressor wheel is something else entirely dude. Really amazing work! Really jealous about the pocketNC and endmill hahaha

As always.... Superb work

Beautiful work! Looking forward to the next steps.

The balls you have sir to even try this. The skill and brainstuff to make it work as imagined is awe-inspiring. No room for a single mistake in execution.

Quite complex project, I'v enjoyed that, nice :-)

Awesome work! The "offset" turning at around 20min definitely gave me the heebie-jeebies though.

@DFX2KX

5 жыл бұрын

Glad I wasn't the only one.

@NavyfieldVikings

5 жыл бұрын

Brave , is a good word for it i guess :)

This is incredible. I wish I had the equipment and the time to dedicate to things like this more often ...

Wow very nice job! This part look realy great, and the process is impressive. Thanks.

Dude This Is Sick Can't Wait To See What It's Going In!

@leelee-rf6px

5 жыл бұрын

* JayGie * how do you know? More like an RX-7

@simplypony4108

5 жыл бұрын

@@leelee-rf6px more like nirtro rc...

@leelee-rf6px

5 жыл бұрын

Simply Pony Nitro?

I love that hammer. Its super fast. Must make things easier. ;)

@redthunderfox

5 жыл бұрын

Lol

@terminaltrash6284

5 жыл бұрын

Tac hammers are nice

@pat9861

5 жыл бұрын

Bitz he/she knows that!!! He making a joke, grow a sense of humour

@aviohebshalom3392

5 жыл бұрын

I think the real dum dum is the person that spells dumb (dum). Just sayin' , pot calling the kettle black much?!?!

@someguy_with_anime_pic

5 жыл бұрын

@@aviohebshalom3392 Who tf spells dum dum "dumb dumb"?

As long as I don't think about the time that went into design and patterning, this is the most relaxing thing I've seen in months.

Small, but perfectly formed. A thing of beauty! Hats off to you. 👏👌👍 Liked + subbed. Can't wait to see more!!!

Nice work!!!

Watched every second of your video....You have a GOD given gift....Stunning work...!!!!!!!!

@jonross377

5 жыл бұрын

It is called a skill, and it is learned. There are classes for CNC at your local community college.

Nice machined part enjoy these pocket 5 axis cnc mills they are a real joy to watch. Thank you. Lance & Patrick.

dude your machining skills on such small parts is amazing. you have such a talent for this. NICE WORK

Love your vids

This is ASMR for me dude .. Loving it.

Die kleine NC Fräse ist genial! Das ganze Projekt ist beeindruckend!

Your machinery and projecting skills are just over 9000😁 I can't wait for part 2...

очень много операций, по снятию установке, но результат красота! А конец восхитителен, турбина что надо! Негода приди зацени!

@NikoRocwell

5 жыл бұрын

Очень много чпу....Игорь думаю вручную попробовал бы сделать), максимум токарный

Was this your first attempt? Impressive stuff, man! Keep it up! Greetz from Germany!

@Nico-ds9nz

5 жыл бұрын

Bin auch aus Deutschland 😊👋

@technikchaot

5 жыл бұрын

Ich glaube hier sind einige aus dem Land der Erfinder und der Ingenieure. Auch wenn wir es sobald es ums große Geld geht nicht mehr drauf haben.

@pichi5733

5 жыл бұрын

Krass, mehr Deutsche hier als ich erwartet hatte😊

@thilo7546

5 жыл бұрын

@@pichi5733 allerdings

@kennyrogersfan

5 жыл бұрын

@@technikchaot made in Germany wird trotzdem immer ein Maßstab sein. Aber gute Mechanix gibt's auf der ganzen Welt 👍

You have outdone yourself again. Enthralling process.

So fun to watch, you have serious skills (and patience). I can’t imagine the design and the CNC programming process. I can’t wait for the next one.

But do the physics of fluid dynamics scale at this level?

@xeigen2

5 жыл бұрын

It's much, much harder to design very small turbomachinery. Everything needs to be way more accurate with way better tolerances than at a larger scale. I doubt it will work very well unless he's done CFD analysis on it to confirm the design. The smallest centrifugal compressors are more than double the size of this. There's nothing out there as small as this.

@offwhitecolby

5 жыл бұрын

DaToNyOyO it’s not a turbo tho

@MiGujack3

5 жыл бұрын

Who cares lol, any boost is already a win.

@nicholaslabrecque

5 жыл бұрын

@@offwhitecolby actually yes it is a turbo charger not a super charger a super charger uses crank power to add boost while turbo charger uses exhaust gases to create boost also this looks nothing like a super charger

@basementrocketry5868

5 жыл бұрын

@@nicholaslabrecque literally at 00:01 the text says "this setup will run as a supercharger" and then goes on to explain that it will be belt driven and won't be powered with exhaust gasses.

The suspense this video gave me is priceless: 19:48 "Nooo! It's too fast" 19:56 "Oh, sped up footage"

@davidlatoche8751

5 жыл бұрын

yea putting unbalanced crap in a lathe at 2,000 probably isnt the best idea..

Dude, This is the cutest most badass thing I've ever seen! I love it!

This is awesome, ive always wanted to see a mini centrifical supercharger built from scratch

No one: Absolutely no one: My neighbor at 7:30 PM: 9:57

@adimac73

5 жыл бұрын

On sunday

You should try some 3D printing and then casting those 3D prints! Then you could do it in one piece. Keep up the good work!

@prodzektownia

5 жыл бұрын

too small for accurate casting

@athhud

5 жыл бұрын

You’d still have to end up machining it and then have to worry about porosity. It would be a lot more work and would only save a little wear on tooling at best.

You have an amazing amount of patience. I would never be able to invest that much time and effort into making one little part.

Beautiful job. I look forward to the Part 2. Thumbs up.

aint a belt driven turbo just a supercharger tho? edit: it would seem i cannot read

@turbodiesel4932

5 жыл бұрын

Rhys Parker i read turbo aswell😂😂

@DG7Paul

5 жыл бұрын

@@turbodiesel4932 glad to see I'm not alone

@penguinsdude74

5 жыл бұрын

A turbocharger is still a supercharger, just refers to ones driven by exhaust not a belt.

@Brian7547

5 жыл бұрын

Looks like a turbo charger to me

now this will fit my honda civic.

@timothyjsullivan

5 жыл бұрын

I was waiting for this comment

@portingfreak

3 жыл бұрын

Nice mcm reference

Amazing can’t wait to see it work! 🙌🏼

Got to say, the best 23 min of the past year!! thanks!

Igor Negoda appreciates your ideas.

Making a supercharger (Belt driven turbocharger) Sooooo a procharger lol.

@Koshmar-13

5 жыл бұрын

procharger is a brand. centrifugal supercharger is the term of this kind of forced induction.

@shancyroesner9212

5 жыл бұрын

Centrifugal is the name but PROCHARGER sounds wayyy cooler

@skylord3511

5 жыл бұрын

@@Koshmar-13 I know but most people probably heard of a procharger and it does sound cooler lol

@Koshmar-13

5 жыл бұрын

@@skylord3511 yea that's true lol it'll be nuts if he pulls this project off tho.

@xeigen2

5 жыл бұрын

Doesn't make sense to say belt driven turbocharger. A turbo is just a supercharger driven by a turbine, aka turbo-supercharger as they were originally called.

I really like the combination of riveting along with 5-axis cnc. This part turned out very well!

The Pocket NC is an amazing little tool. It's a shame that it's so expensive. I'd love to have one. Nice work on this project so far. I can't wait for part two! 🙂

@defalt45

Жыл бұрын

Just from seeing it I thought that it would be in the 3000€, reading this I thought wow maybe 5k... FOURTEEN DAMN THOUSAND it is.

Dude, wtf is your dayjob? Are you a model engineeer or something?

@kokofun1

5 жыл бұрын

I dont know, but he's milling knowledge is self taught (I hope xD)

Everyone saying “pro charger”. Imagine he was making a shoe but instead of calling it a shoe the commenters would just call it a Nike...

This kind of part is way above hobbyist level !!! Great job, thinking about all the steps using different tools... i'm impressed bro

Mate, this is unreal!! Great craftsmanship, and a pretty awesome little mill you got there.

complete noob question, why doesn't this CNC mill need coolant?

@drumbum7999

5 жыл бұрын

it's not that it couldnt benefit from using coolant but with such small parts to machine, I would imagine they cool quickly enough especially if it's only doing very shallow passes and not removing that much material at any given time.

@truckfreak4537

5 жыл бұрын

It’s cutting aluminum it doesn’t really need it

@stig5763

5 жыл бұрын

Aluminum does not conduct heat so well

22:40 *It helps my work tremendously....!! Or *It tremendously helps my work....!!!! ///

@johnnyq90

5 жыл бұрын

English is not my native language. Sorry.

@traceanthony3588

5 жыл бұрын

@@johnnyq90 no one minds but him

I believe this will be your most complex and professional project till now. Can't wait to watch it spinning like hell.

The moment we've been waiting for. I was wondering too. Very interesting. Great job on it!

This would go great on my wife's gas powered vibrator. Next project idea...😂😂😂 procharged vibrator

If it’s belt driven then it’s called pro chargerI want now

@stevenisepic1

5 жыл бұрын

Procharger is a specific brand. If you want to go to those specifics, then this supercharger is really a centrifugal supercharger

@stevenisepic1

5 жыл бұрын

Procharger makes centrifugal superchargers

DUDE! THATS DOPE!! super keen for more, KEEP IT UP!

That machine and your programming skills are amazing

I've been waiting so long for this video! Love your Projekt!

Fantastic attention to detail! Thanks for the video.

Very impressive, it’s nice to people taking pride in their work. 👍🏻

That's why I keep watching your vids you are extremely creative And also pumped for part 2

Very cool cant wait to see it run

It's incredible how talented you are.

Duude!!! sick and smooth!! Congratulations for that work!

Goodluck man Nice project Good video 📹 Can't wait to hear it screaming

Thats amazing. Great job

I am so impressed!! you are an amazing craftsman!

A beautiful piece, can't wait to see the follow up videos

You are an incredible miniature machinist. Great job.

Wow sick playlists can't wait for part 2

Awesome build JohnnyQ90!

Very interesting project and thanks for sharing

Nice work! Can't wait to see the part 2

This is a thing of beauty. Fantastic work.

This just shows what one person can achieve if he has the passion and a vision to do so. Amazing stuff! Can't wait to see and hear it when it's done.

@bumpty9830

5 жыл бұрын

Passion, vision, and access to sophisticated machinery.

Che spettacolo!!!!!! Complimenti!!!!!!! E soprattutto, complimenti per la grande passione che metti nel fare questi lavori!!!!!

Awesome! Can't wait to see the impeller side.

I've been waiting on this one for a long time. You've the patience of a Saint my friend.

@josianlopez7396

3 жыл бұрын

Quiero un turbo para mi carrito de Gasolina y precio motor es OS 18 se puede adaptarse

That tiny machining center is adorable.

Wow! Very cool. Nice work!

Beautiful work! Thanks so much for sharing with us :)

You sir, are some kind of mad scientist. The good kind mind you. Keep up the awesome work

Super cool! Such talent!

Machinework and waves ... good work!

keep it up Johnny absolutely awesome piece of work