Awesome build. The cam locks make it over the top.

Great build I enjoyed the video. I notice some people are being critical of your use of professional workshop equipment. I don’t have all this equipment but love watching their use. It’s still amazing what you can make with just the basic tools. If you have a welder, grinder, drill and basic hand tools you can make something like this. So again, very nice project. 👍😊

This is great!! Wanna try this

how far apart are the cuts on the angle iron?

The Best 👏👏👏👏👏

Quiero hacerte una pregunta yo tengo una máquina multi proceso la tig-qué gas usa

Very good...

Pozdrav iz Srbije ❤

Top tradie

How are you going to adjust your top bar away from the edge for thicker metal? Also with the rounded edge on the top bar I notice you are getting a more rounded bend instead of a crisp bend.

Odličan rad. Mislim da ću probati nešto slično

SIMPLESMENTE FENOMENAL...ROBUSTA E PRATICA ...ABRAÇOS..JAÚ SP.BRASIL

were can i buy break handles?

Tutorial yang baik. Saya mencobanya juga dengan sedikit berberda. Namun ternyata tak semudah menonton vidio

Man a piece of round stock with an off center hole with a flat piece welded to it woulda been A LOT less work.

Me gusta boy Acer una igual

La dimensiune ai făcut crestături?

Gracias por el vídeo. Yo hice una casi igual.

🤣🤣🤣🤣🤣 espera a ver si sales...y luego ya si eso...

Много лишней работы, видимо мастер хотел показать какие у него станки ещё есть.

les angles sont mal fermé d'ou buté sur le renfort supérieur !!!!

Имея такое хорошее оборудование, и делать, можно сказать детские игрушки. Не вдохновило.

Cela devrait être prohibé de faire de machines bricoles avec des outils professionnels, la main c'est la main

@timr6301

Жыл бұрын

You believe in that and he believes in this. Either way both are beautiful traditions. Some of us were only taught with tools.

videos with the use of High Price Tools - Lathe, Milling Machine, Coordinated Table, etc - are discouraging

@alphasigmasezon8597

Жыл бұрын

But I subscribe and pressed Like

@alphasigmasezon8597

Жыл бұрын

Think about use low price tools

@jeffelpa12

Жыл бұрын

Noted Sir. I’ll be more resourceful next time in choosing the kind of tools i used. Thank you for subscribing, appreciate it.

@geobrown9413

2 ай бұрын

Simple hand tools will do the job too. Don't need a TIG, lathe or miller. I kind of like that hold down design.

Get yourself a water jet cutter, make life easyer.

Very elaborate project, not much use really though as not one of them bends is near 90° so no use for doing sharp corner work, the idea of the strengthener on top was good but it stops the workpiece getting to 90° , you can hear it hit several times ,so making any type of container would alway result in sloped sides , sorry but a bit pointless after all your good effort

The folds are round not crisp and sharp if you put a hard squre agenst the flat bottom agenst the fold edge you would see day light along the top side to bottom edge 😢😢😢

With this kind of professional tools and skill, you could have make better one.Corner accuracy is poor.

Tout le monde n'a pas à sa porte un tour, une fraiseuse etc... alors arrêtez de faire le buzz avec des outils qui coûtent moins cher à acheter. Moi j'arrête de regarder la vidéo et je ne mettrais aucun like