this is how to make a beautiful and simple large metal sculpture for your garden or to make money with your welder.
Жүктеу.....
Пікірлер: 41
@ScottyRockz25311 ай бұрын
Love Love Love It! Thanks for the how-to and inspiration!
@scraptoartmetalworks24943 ай бұрын
Watching this made my knees hurt, I have an extra table you can have!
@TheDarkKnightDetectorist2 ай бұрын
thanks for sharing. as a welder fabricator myself, ive done some weird bits in my work place, BUT always wondered how you get a near perfect sphere shape on stuff like that. great work 👍
@dazzasrandomstuff5672
2 ай бұрын
Awesome. Thanks for the feedback. Really appreciate it.
@chrisacuna1393 ай бұрын
Looks great! Thanks for the video.
@dazzasrandomstuff5672
2 ай бұрын
Thanks Chris. Appreciate the positive feedback. 👍🏻
@jatch1003 Жыл бұрын
Very cool, I am a commercial welder, would love to try a project like this.
@gurdeepsinghkapoor7243 Жыл бұрын
superlike, simplified working....!!!
@Vazmenko10 ай бұрын
Great video, Sir
@aperez10 Жыл бұрын
Excellent! Thanks for sharing.
@akinequeen65698 ай бұрын
Es hermoso tu trabajo, ojalá pudiera hacer una similar. Gracias por compartir cómo realizar tu arte, eres muy generoso
@ypaulbrown8 ай бұрын
outstanding.......cheers from the USA.....Paul
@dazzasrandomstuff5672
2 ай бұрын
Thanks Paul. Appreciate the positive feedback 👍🏻
@scottthomas54502 жыл бұрын
Awesome piece of art look forward to see what you do next
@davidt5776 Жыл бұрын
Love your work
@alanm34382 жыл бұрын
Wow that is cool. I like how it sort of changes as you walk around it. I used to do metal art and there are some pictures on my KZread channel. Good job.
@vikramkhaira7070able7 ай бұрын
Amazing!!! Keep up the
@bobprice9244 Жыл бұрын
try a 7014 rod. really easy start. doesn't like to go over slag though. 6013 is another great rod for thin metal
@wolframschweier3307 Жыл бұрын
More inspiration. Well done
@danielmurzellotheunknownma74812 жыл бұрын
Hello👋🙋♂️ there.. Amazing and very interesting project.. So well made.. Thanks for sharing Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
@tomthompson74005 ай бұрын
great system ,, nice and simple for anyone to try, but if you had another circular frame the same and bolted the four sections together at the center you would have far better control as you would always be welding a supported section and the gaps wouldnt grow .
@jamesbarbour8400 Жыл бұрын
Maybe I'm going deaf but you really need to up the volume on this !
@tylerkania409 ай бұрын
What’s the best way to create the half circle?
@user-zw6cj5hw8j Жыл бұрын
The smal sizes lap shaded ❤👍
@n8o8n Жыл бұрын
Awesome job! Can I ask how much you sold it for?
@dazzasrandomstuff5672
Жыл бұрын
Thanks Around 5k.
@n8o8n
Жыл бұрын
@@dazzasrandomstuff5672 Very modest. I've seen similar size sculptures with half the material and with a raw finish priced at three times that. Awesome piece.
@user-zw6cj5hw8j Жыл бұрын
Where can it be used and how many kilos???
@karenlewkowitz5858 Жыл бұрын
Any tips on sourcing the metal rings?
@dazzasrandomstuff5672
10 ай бұрын
Hi Karen. You local steel sales should be able to cut them for you.
@chamsoccacanhcaycanh14882 жыл бұрын
How to make a deer ? Teach me how
@daveyjohn1000 Жыл бұрын
What sort of cost is involve for the treatment?
@dazzasrandomstuff5672
Жыл бұрын
Hi John. Powder coating costs around $500-$600.
@thomasbarson15610 ай бұрын
Would this jig work for horse shoes ?
@dazzasrandomstuff5672
10 ай бұрын
Probably not great because of the gap in the horseshoe
@michaelfalkson3118 Жыл бұрын
Could you share the exact dimensions (audio is real bad). Thnx.
@dazzasrandomstuff5672
Жыл бұрын
1.2m in diameter ..
@michaelfalkson3118
Жыл бұрын
@@dazzasrandomstuff5672 Thanks. Was hoping if you could give the measurements of the rings (+cuts)...your rounded square bar etc. Would live to try my hand at doing something like this if you don't mind. 😄
@dazzasrandomstuff5672
Жыл бұрын
No problem. 100mm diameter rings 45mm x 4mm thick. Jig cuts are 50mm apart. With a 3mm grinder blade. Good luck with your project.
@michaelfalkson3118
Жыл бұрын
Thanks. How navy rings were used?
@savannaswildnatureworkshop7810 Жыл бұрын
lack of symmetry offends my artist eye..I've seen very similar pieces...done with better symmetry Not enough time spent on fitup
Пікірлер: 41
Love Love Love It! Thanks for the how-to and inspiration!
Watching this made my knees hurt, I have an extra table you can have!
thanks for sharing. as a welder fabricator myself, ive done some weird bits in my work place, BUT always wondered how you get a near perfect sphere shape on stuff like that. great work 👍
@dazzasrandomstuff5672
2 ай бұрын
Awesome. Thanks for the feedback. Really appreciate it.
Looks great! Thanks for the video.
@dazzasrandomstuff5672
2 ай бұрын
Thanks Chris. Appreciate the positive feedback. 👍🏻
Very cool, I am a commercial welder, would love to try a project like this.
superlike, simplified working....!!!
Great video, Sir
Excellent! Thanks for sharing.
Es hermoso tu trabajo, ojalá pudiera hacer una similar. Gracias por compartir cómo realizar tu arte, eres muy generoso
outstanding.......cheers from the USA.....Paul
@dazzasrandomstuff5672
2 ай бұрын
Thanks Paul. Appreciate the positive feedback 👍🏻
Awesome piece of art look forward to see what you do next
Love your work
Wow that is cool. I like how it sort of changes as you walk around it. I used to do metal art and there are some pictures on my KZread channel. Good job.
Amazing!!! Keep up the
try a 7014 rod. really easy start. doesn't like to go over slag though. 6013 is another great rod for thin metal
More inspiration. Well done
Hello👋🙋♂️ there.. Amazing and very interesting project.. So well made.. Thanks for sharing Do keep posting Warm regards and best👍💯 wishes The UnknownManCub 👍😎👨🏭
great system ,, nice and simple for anyone to try, but if you had another circular frame the same and bolted the four sections together at the center you would have far better control as you would always be welding a supported section and the gaps wouldnt grow .
Maybe I'm going deaf but you really need to up the volume on this !
What’s the best way to create the half circle?
The smal sizes lap shaded ❤👍
Awesome job! Can I ask how much you sold it for?
@dazzasrandomstuff5672
Жыл бұрын
Thanks Around 5k.
@n8o8n
Жыл бұрын
@@dazzasrandomstuff5672 Very modest. I've seen similar size sculptures with half the material and with a raw finish priced at three times that. Awesome piece.
Where can it be used and how many kilos???
Any tips on sourcing the metal rings?
@dazzasrandomstuff5672
10 ай бұрын
Hi Karen. You local steel sales should be able to cut them for you.
How to make a deer ? Teach me how
What sort of cost is involve for the treatment?
@dazzasrandomstuff5672
Жыл бұрын
Hi John. Powder coating costs around $500-$600.
Would this jig work for horse shoes ?
@dazzasrandomstuff5672
10 ай бұрын
Probably not great because of the gap in the horseshoe
Could you share the exact dimensions (audio is real bad). Thnx.
@dazzasrandomstuff5672
Жыл бұрын
1.2m in diameter ..
@michaelfalkson3118
Жыл бұрын
@@dazzasrandomstuff5672 Thanks. Was hoping if you could give the measurements of the rings (+cuts)...your rounded square bar etc. Would live to try my hand at doing something like this if you don't mind. 😄
@dazzasrandomstuff5672
Жыл бұрын
No problem. 100mm diameter rings 45mm x 4mm thick. Jig cuts are 50mm apart. With a 3mm grinder blade. Good luck with your project.
@michaelfalkson3118
Жыл бұрын
Thanks. How navy rings were used?
lack of symmetry offends my artist eye..I've seen very similar pieces...done with better symmetry Not enough time spent on fitup