Step by step guide for how to replace torsion bar plastic bushings or loader tool. This is same for W163 ML 320, 350, 400, 430, 500 and ML 55.
Жүктеу.....
Пікірлер: 29
@duancoviero97595 ай бұрын
OMG, thank you for this video. I have good suspension but was still hearing unbelievable creaking. Now i know where to look.
@Leo707806 ай бұрын
Thanks for that it was very helpful I've got a w163 ml320 and absolutely love it .
@olufunmitaiwo44128 ай бұрын
Thank you very much for the video and the wisdom
@marcelinodenja61628 ай бұрын
Thanks for the lessons
@gasNgears
8 ай бұрын
You're welcome bud.
@alannobakht85033 ай бұрын
Thanks so much for the video, I have ML320- 2003 Sport Edition and do not hear any noise from bottom of my sits, however I know now if I do then what to look for.
@JavierGonzalez-mv8jm7 ай бұрын
Como puedo conseguir los forros denailon de la barra suspension mb ml 270 cdi w163
@161Manu4 ай бұрын
I seem to only have creaking noises which i suspect to be suspension upon acceleration and braking. Could it be the torsion bar? Either way I'm going to replace these :P
Жыл бұрын
Were you listening any noise when making turns? like a metal on metal noise ? I think you might have helped me find the origin of an anoying noise
@gasNgears
Жыл бұрын
Yes sir, 100% it's the metal on metal creaking noise that got into this job. Fairly easy job and well worth it because it makes the suspension quite again. Good luck!
Жыл бұрын
@@gasNgears Thank you so much!
@stephaniec22609 ай бұрын
I have a 2013 ml350 4matic no air ride suspension. I replaced shocks, struts, coil springs, CV axles, wheel bearing but still get a rough ride and front of car slants lower than rear. Also I sometimes hear a metal to metal noise on turns and creaking. MB nor anyone else can't determine issue. Any ideas?? I can't find any info for torsion bar part for my car.
@gasNgears
9 ай бұрын
@stephaniec2260 fairly certain that ML second generation (2007) and onwards do not have the torsion bars as they started making newer models unibody instead of body on frame like mine. Makes me wonder if your suv was ever in an accident! Or hit a crazy pothole that might have bent a control arm that is giving you all this trouble. But then again, I haven't seen it, so it's just a speculation. Suspension is a very finicky component, and minor change or alteration like that might go unnoticed, but under stress or turning, it would cause issues. Hope your issue gets sorted soon.
@Brightly747 Жыл бұрын
Would you please show exact automotive glue used? Thanks
@gasNgears
Жыл бұрын
I used a generic auto glue called GOOP. Here's the link for it www.amazon.com/Amazing-GOOP-160012-Automotive-Adhesive/dp/B000CCID28 Hope it helps. Cheers
@Brightly747
Жыл бұрын
@@gasNgears much appreciated.
@allanbarbour287910 ай бұрын
Hi, I have a 350 w164 that has the same annoying creaking noise. But when searching for the torsion bar bushing, I can only see a listing for the earlier W163. Any ideas where I can source the bushes for my 2010 W164 I’ll be honest, I haven’t looked under the car to see if it’s even the same set up. Away with work atm.
@gasNgears
10 ай бұрын
Hi @allanbarbour2879, W163 is a body on frame and has torsion bars, I am fairly certain W164 being a unibody uses struts instead.
@allanbarbour2879
10 ай бұрын
@@gasNgears Very much appreciated for your quick reply. I actually have a brand new assembled pair of front struts to fit as I had an advisory last MOT So hopefully that cures the creaking as it’s one of those embarrassing noises when trying to park. Thanks again
@TheRawadali Жыл бұрын
Is there a website to buy these parts?
@gasNgears
Жыл бұрын
www.rockauto.com has it Torsion Bar Unloading Tool
@TheRawadali
Жыл бұрын
@@gasNgears Does it have a name or number for the piece?
@mcsirias Жыл бұрын
2 front and 2 rear??
@gasNgears
Жыл бұрын
No bud, there's only two torsion bars and they are at the front so only need two. One per side. Cheers
@mcsirias
Жыл бұрын
@@gasNgears Oh my God, my mechanic told me that there were 2 in the back, on each side and in the front on each side...
@gasNgears
Жыл бұрын
@mcsirias is your Ml a first generation ( W163) or the second generation? I have never heard of rear torsion bar bushings on the W163 before bud.
@mcsirias
Жыл бұрын
@@gasNgears it is second generation, ML 320 2002
@gasNgears
Жыл бұрын
@mcsirias 2002 is a first-generation face-lift. That does not have rear torsion bars. It only has two torsion bushings, and they are super easy to replace. P
Пікірлер: 29
OMG, thank you for this video. I have good suspension but was still hearing unbelievable creaking. Now i know where to look.
Thanks for that it was very helpful I've got a w163 ml320 and absolutely love it .
Thank you very much for the video and the wisdom
Thanks for the lessons
@gasNgears
8 ай бұрын
You're welcome bud.
Thanks so much for the video, I have ML320- 2003 Sport Edition and do not hear any noise from bottom of my sits, however I know now if I do then what to look for.
Como puedo conseguir los forros denailon de la barra suspension mb ml 270 cdi w163
I seem to only have creaking noises which i suspect to be suspension upon acceleration and braking. Could it be the torsion bar? Either way I'm going to replace these :P
Were you listening any noise when making turns? like a metal on metal noise ? I think you might have helped me find the origin of an anoying noise
@gasNgears
Жыл бұрын
Yes sir, 100% it's the metal on metal creaking noise that got into this job. Fairly easy job and well worth it because it makes the suspension quite again. Good luck!
Жыл бұрын
@@gasNgears Thank you so much!
I have a 2013 ml350 4matic no air ride suspension. I replaced shocks, struts, coil springs, CV axles, wheel bearing but still get a rough ride and front of car slants lower than rear. Also I sometimes hear a metal to metal noise on turns and creaking. MB nor anyone else can't determine issue. Any ideas?? I can't find any info for torsion bar part for my car.
@gasNgears
9 ай бұрын
@stephaniec2260 fairly certain that ML second generation (2007) and onwards do not have the torsion bars as they started making newer models unibody instead of body on frame like mine. Makes me wonder if your suv was ever in an accident! Or hit a crazy pothole that might have bent a control arm that is giving you all this trouble. But then again, I haven't seen it, so it's just a speculation. Suspension is a very finicky component, and minor change or alteration like that might go unnoticed, but under stress or turning, it would cause issues. Hope your issue gets sorted soon.
Would you please show exact automotive glue used? Thanks
@gasNgears
Жыл бұрын
I used a generic auto glue called GOOP. Here's the link for it www.amazon.com/Amazing-GOOP-160012-Automotive-Adhesive/dp/B000CCID28 Hope it helps. Cheers
@Brightly747
Жыл бұрын
@@gasNgears much appreciated.
Hi, I have a 350 w164 that has the same annoying creaking noise. But when searching for the torsion bar bushing, I can only see a listing for the earlier W163. Any ideas where I can source the bushes for my 2010 W164 I’ll be honest, I haven’t looked under the car to see if it’s even the same set up. Away with work atm.
@gasNgears
10 ай бұрын
Hi @allanbarbour2879, W163 is a body on frame and has torsion bars, I am fairly certain W164 being a unibody uses struts instead.
@allanbarbour2879
10 ай бұрын
@@gasNgears Very much appreciated for your quick reply. I actually have a brand new assembled pair of front struts to fit as I had an advisory last MOT So hopefully that cures the creaking as it’s one of those embarrassing noises when trying to park. Thanks again
Is there a website to buy these parts?
@gasNgears
Жыл бұрын
www.rockauto.com has it Torsion Bar Unloading Tool
@TheRawadali
Жыл бұрын
@@gasNgears Does it have a name or number for the piece?
2 front and 2 rear??
@gasNgears
Жыл бұрын
No bud, there's only two torsion bars and they are at the front so only need two. One per side. Cheers
@mcsirias
Жыл бұрын
@@gasNgears Oh my God, my mechanic told me that there were 2 in the back, on each side and in the front on each side...
@gasNgears
Жыл бұрын
@mcsirias is your Ml a first generation ( W163) or the second generation? I have never heard of rear torsion bar bushings on the W163 before bud.
@mcsirias
Жыл бұрын
@@gasNgears it is second generation, ML 320 2002
@gasNgears
Жыл бұрын
@mcsirias 2002 is a first-generation face-lift. That does not have rear torsion bars. It only has two torsion bushings, and they are super easy to replace. P
🤦♂️