No walk in the park! Thanks to this video I had mine together in 4+ hrs. flying solo. Used the vid step by step, never looked at the manual. Mute the music and you're good to go. Completely assembled on a banquet table covered with a moving blanket.

Thank you for this video. Easy to follow and worked great. The wiring harness instructions wasn’t the greatest but it worked. 👍

Very helpful without any blahs like many others. Thanks!

Hardest thing I've ever assembled. 2 guys, 3 hours. Also used a jacknife to get the doors on. (holding the pin up while sliding the door into place)

@bryansandiego2658

4 ай бұрын

the dang doors are the hardest part! geezus!

It took me about 6 hrs to put this damn grill together by myself. Was i supposed to have so many screws left over?

the first tool used was a razer. But you only need a screwdriver?

How do you know which wire goes under the side burner? This is my first time assembling a gas grill

Will this video work for the regular 4 burner gas grill from Member's Mark?

@MembersMarkGrills

8 ай бұрын

This is model specific. It is only for the Member's Mark Pro-Series 4 Burner gas grill.

When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help

@MembersMarkGrills

Ай бұрын

I replied on a previous comment, but just to reiterate: Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 support@proseriesbbq.com. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!

Will call customer service during business hours, if need be. but, I got it all put together, with the exception of a few questions. Thought by chance someone might have solutions. First, I have three wires coming out of the opening that connect to side burner ignition electrodes. Attached two of them, but the third one isn't mentioned iin the instructions. directions and doesn't appear to have a home. Second, on the inside electrode panel, there is what I assume to be a ground, What do I attach it to? The side wall? One of the screws that holds that panel in place? On that same note, is it imperative to have that plastic sleeve in place for the electrode wires? Doesn't appear to be room to put it anywhere, and is hard to get it to hold the wires. Third, the part labeled K, the little chrome hook, or whatever it is, is labeled in the instruction manual for the wheel install sequence but nothing is shown to as where it goes. Directions seemed spot on. Used KZread, paper manual and Bilt app. No parts left over, except the K I mentioned.

@MembersMarkGrills

Ай бұрын

Thank you for reaching out. It is hard to answer questions via comment, as there is nowhere to post images. BILT is your best resource, as you can pause, rewind, zoom in and rotate the 3D image. Question #1: There are 3 electrode wires go as follows: 2 wires plug into the back of the ignition button 1 wire plugs to the side burner electrode. (see image on step 17 in manual) Question #2 The ground wire has 2 sides. The plug side goes in the front. The loop attaches at the back with screw E (see image on step 3 in manual). The sleeve on the wires is just for the customer’s benefit to keep wires neat and together. You may find that you have to pull the wires down with a firm tug to fully get the wires out from under the control panel. Question #3 Hardware K is a tool. It fits into the holes on the casters, to keep the casters in place, in order to screw them onto the bottom shelf without the casters spinning. (See image on step 1 in manual) Hardware K will only be used during assembly but will be discarded at the end. For questions or assistance, please reach out to customer care by phone or email at: 1-833-454-0864 support@proseriesbbq.com. Hope this helps!

What happens with the chain on the door. None of the instructions say anything?

@stevekorell7062

4 ай бұрын

I believe it's to hold a match to light grill if igniter is not working.

what the average time for assembly? Once I know I'll double it. Just picked one up and now watching this video for assistance.

@davidporterrealestate

Жыл бұрын

I just did it in 2 hours taking my time

@michaelsavich9348

Жыл бұрын

@@davidporterrealestate Took me 3 hours.

@manoelramon8283

11 ай бұрын

3 hours for me

When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help

@MembersMarkGrills

Ай бұрын

Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 support@proseriesbbq.com. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!