Good morning, do you have the manual online? I've looked for it and can't find it
@Dhall-sg2hf2 күн бұрын
Shouldnt the covers be over the burners themselves and not in between them? What happens when food/oil/grease drips down onto the burner itself? Over time that will clog them.
@Theladylove_7 күн бұрын
can you cook with the hood down ?
@richb11288 күн бұрын
Push in and hold burners 2 and 4 for them to light.
@mijonacosta144816 күн бұрын
GOOD VIDEO HELPED TROUBLE SHOOTING WITH THE START OF BURNERS #2 AND #3. THANK YOU!!
@TheMasterChiefArchivesКүн бұрын
This was driving me crazy!!! I thought we received a defective unit, thank you so much for your comment!!!
@dubbschultz117 күн бұрын
It took me about 6 hrs to put this damn grill together by myself. Was i supposed to have so many screws left over?
@woodendoors694421 күн бұрын
For some reason the two middle burners don't have any propane at all going to them. I tried everything in the video and it still doesn't work even though the grill is brand new. Any suggestions?
@Onya9122 күн бұрын
My middle two burners are not working
@chicagoground19 күн бұрын
Mine also, did you figure it out?
@albinantony14 күн бұрын
@@chicagoground same here… it works if u keep it pressed down!
@chicagoground11 күн бұрын
@@albinantony keep what pressed down 🤔 💭
@albinantony11 күн бұрын
@@chicagoground sorry :P .... the middle 2 burner regulator knob
@mikeabernathy620124 күн бұрын
What are rods on the chain for? 🤔 Thanks
@marcusxavier443625 күн бұрын
Better than blackstone
@user-qf2ro3bd3s26 күн бұрын
It says set the griddle on a flat surface. What kind of surface metal wood glass does it have to be temperature sensitive?
@rebeccascavello560728 күн бұрын
What is the best oil to use for seasoning? Regular canola oil like I season cast iron pan with?
@lennym48029 күн бұрын
Don't leave it outside or it will rust
@nlv4everАй бұрын
I didn’t get a cover with mine 😢
@kstutz81Ай бұрын
Will this pizza oven be around for a while? I’m reading good things just need to save up.
@ThewhynotpodcastteddydАй бұрын
Just got this for Father’s Day and I LOVE it! 👍🏾
@scottweisel3640Ай бұрын
Fired mine up today for Father’s Day. It wouldn’t reach 450 for searing in thermostatic mode. It also didn’t hold 450 in thermostatic mode. I’m kind of disappointed. I guess I should have bought a Weber.
@MembersMarkGrillsАй бұрын
Thank you for taking time to reach out. Troubleshooting is difficult over char. For more personal troubleshooting assistance with heating issues, please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. We would be happy to assist with any issues you're facing.
@dcee4817Ай бұрын
Why do you have to season the grill?
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Seasoning your griddle top improves the cooking performance, creates a non-stick surface for cooking, prevents damage and deterioration due to moisture and humidity, and extends the life of your griddle. Applying a coating of oil at the start and finish of each cook, will help to maintain seasoning. Without seasoning your griddle will oxidize, causing rust to appear. Griddle are also not non-stick until they have been seasoned. Hope this helps!
@dcee4817Ай бұрын
Why do you have to season it ?
@06Trdrew11Ай бұрын
Seasoning a griddle with oil creates a non-stick surface and protects the bare metal from rust. The seasoning process involves burning oil into the griddle's cooktop, leaving behind compounds that act as a buffer between the food and the metal. Seasoning can make a griddle's cooking surface as effective as a non-stick pan
@user-rv5oj9xx9qАй бұрын
Will call customer service during business hours, if need be. but, I got it all put together, with the exception of a few questions. Thought by chance someone might have solutions. First, I have three wires coming out of the opening that connect to side burner ignition electrodes. Attached two of them, but the third one isn't mentioned iin the instructions. directions and doesn't appear to have a home. Second, on the inside electrode panel, there is what I assume to be a ground, What do I attach it to? The side wall? One of the screws that holds that panel in place? On that same note, is it imperative to have that plastic sleeve in place for the electrode wires? Doesn't appear to be room to put it anywhere, and is hard to get it to hold the wires. Third, the part labeled K, the little chrome hook, or whatever it is, is labeled in the instruction manual for the wheel install sequence but nothing is shown to as where it goes. Directions seemed spot on. Used KZread, paper manual and Bilt app. No parts left over, except the K I mentioned.
@MembersMarkGrillsАй бұрын
Thank you for reaching out. It is hard to answer questions via comment, as there is nowhere to post images. BILT is your best resource, as you can pause, rewind, zoom in and rotate the 3D image. Question #1: There are 3 electrode wires go as follows: 2 wires plug into the back of the ignition button 1 wire plugs to the side burner electrode. (see image on step 17 in manual) Question #2 The ground wire has 2 sides. The plug side goes in the front. The loop attaches at the back with screw E (see image on step 3 in manual). The sleeve on the wires is just for the customer’s benefit to keep wires neat and together. You may find that you have to pull the wires down with a firm tug to fully get the wires out from under the control panel. Question #3 Hardware K is a tool. It fits into the holes on the casters, to keep the casters in place, in order to screw them onto the bottom shelf without the casters spinning. (See image on step 1 in manual) Hardware K will only be used during assembly but will be discarded at the end. For questions or assistance, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Hope this helps!
@stouttaaddis9892 ай бұрын
Thank you for the video, super useful!
@MzPocahontaz2 ай бұрын
Love to grill, however, we can't get the gas igniter to ignite😮
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
@CarnivoryHODL2 ай бұрын
Nice. Mine won’t even turn on.
@MembersMarkGrillsАй бұрын
Thank you for reaching out. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
@Huzzunga2 ай бұрын
Just walked around the corner to check and mine thought it was out of pellets, they just quit falling in. Dominion locked into err error code regardless of filling these steps, plus more. Last year support sent me a new controller which worked fine after that swap out I guess tomorrow I will blow air through it a couple times just in case there is a hang up at start up. Heck of a thing to spend $400 for a dozen used 8 of which ran correctly My auger is clean as a whistle, it just “funneled” and stopped feedings pellets to the auger Everything lives in the garage never seen a night outdoors So it’s not moisture related
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
@rrob83442 ай бұрын
Is this discontinued?
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. The Member's Mark Pellet grill is still available at some Sam's Club locations but only while supplies last. Once they are sold out, they will no longer be available. Hope this helps!
@beverlyquarles74592 ай бұрын
Does grill lift out of stand
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. The charcoal grill and workstation are 1 unit when fully assembled. Hope this helps!
@damonlewis16202 ай бұрын
I’ve had mine since December and I can’t get the temperature setting to display
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
@AleijaJones2 ай бұрын
When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help
@MembersMarkGrillsАй бұрын
I replied on a previous comment, but just to reiterate: Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!
@AleijaJones2 ай бұрын
When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!
@marthatassi2932 ай бұрын
Please recommend a rotisserie kit for this model. Thank you in advance.
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. There are rotisserie mounting holes pre-drilled into the firebox for a rotisserie. The specific item number for a rotisserie sold at Sam's Club is Item# 990133827. However, this item is currently out of stock. In the meantime: The width of the firebox is: 28.6" (72.7cm) you can use this width to find a rotisserie kit that will fit your grill. Hope this helps!
@Ep1K0nE2 ай бұрын
I don’t have a click at all is my starter pilot bad?
@MembersMarkGrillsАй бұрын
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]
@SapphireKraft2 ай бұрын
Quick question does anyone know if we could cook a Turkey for Thanksgiving on this grill? My oven is messed up and the owner doesn’t want to replace it. I bought this grill and we like it ❤❤❤
@MembersMarkGrillsАй бұрын
Sorry for the delay, The Member's mark Pro-Series 4 Burner gas grill does come with pre-drilled holes for a rotisserie bracket. The firebox width is 72.7cm (28.6") These measurements will help you find a rotisserie kit that fits. Hope this helps!
@johnandjudyrausch9620Ай бұрын
@@MembersMarkGrills you can do a turkey without rotisserie, just use a large aluminum foil pan and butter up the turkey and cover with foil. remove the foil for the last 30 min to brown the bird.
@scotth.11792 ай бұрын
Which weber grill does this compare to?
@Anonymous-nc3vd2 ай бұрын
What is the size of the actual griddle
@MembersMarkGrills2 ай бұрын
Sorry for the delay. The DIMENSIONS of the griddle top are as follows: Length: 91.4cm (36") Width: 50.8cm (20”) Griddle Top Thickness: 4.5mm
@markh47533 ай бұрын
With the exception of the cover and the charcoal baskets non of the parts are compatible with the weber 22 kettle or 22 preformer. It appears this was done by design.
@MembersMarkGrills3 ай бұрын
Hello, For parts for your Weber grill you will have to reach out to the manufacturer of your grill. (Weber). As we do NOT manufacture weber grills we do not have access to their parts to offer replacements.
@tmason16363 ай бұрын
I love this grill. Purchased on sale for $165 last year and it doesn’t disappoint. It’s heavy, beautiful, functional, and assembly was a breeze. If you have challenges reading directions and organization please find something already assembled. I purchased a smoke box for the inside and use this grill twice weekly for meals. My best purchase out of last year. Now the glass version is available but I’ll hold out on that one until the price drops significantly. The new pellet grill is on my sights just waiting on a good sale.
@tmason16363 ай бұрын
Can’t wait until this one goes on sale. I have the prior version without the glass viewing area and it’s a beast. Temps get to 700+ if you open your gas valve.
@keltis1844Ай бұрын
When you think it will go on sale?
@tmason1636Ай бұрын
@@keltis1844 it’s dropped from its initial price of 499. USD to 399. USD but normally deep discounts are in fall/winter. I purchased the previous version of this one without glass insert for 169. USD in October 2022. Hope this helps with planning.
@keltis1844Ай бұрын
@@tmason1636thank you! I might just get one now & a spare when price drops in OCT. 😊
@keltis1844Ай бұрын
@@tmason1636 I looked at reviews on this and got a question for you …did you have issue with the middle two burners lighting up & staying lit? That seams to be an issue with complaints .
@tmason1636Ай бұрын
@@keltis1844 I had the issue if I rip the tank open all the way. But after I read the manual it said to slowly open tank valve. Haven’t had the issue since. That issue happens because of the built in overflow protection device.
@samuelguzman-bb4ys3 ай бұрын
2024 or Father's day
@samuelguzman-bb4ys3 ай бұрын
Greg's Birthday gift 😂🎉😊
@mikemartin55593 ай бұрын
Got mine together EXCEPT FOR the 2 screws that won’t fit the side rack. Weird.
@TomA.Furness3 ай бұрын
One of the best grills I have ever had.I had fun putting it together. A little challenging but not too hard only fun.
@billykellum3 ай бұрын
Thank you for this video. Easy to follow and worked great. The wiring harness instructions wasn’t the greatest but it worked. 👍
@adamrosenberg43433 ай бұрын
Boy... I really should have watched this video I've been wondering why the middle burners always seemed to shut off
@MembersMarkGrills3 ай бұрын
That is what we are here for. Glad this video helped :)
@arturozavala867728 күн бұрын
Do you get uneven cooking on yours with the oven mode?
@dalilama6663 ай бұрын
Looks like bad, I’m excited too cook some fajitas tho tho
@KpCrewProduction3 ай бұрын
Will the glass in the viewing window shatter if it begins to rain after grilling?
@MembersMarkGrills3 ай бұрын
Thank you for your inquiry. The Viewing Window is constructed from tempered glass. which was specifically selected due to its ability to go from hot to cold without shattering. Hope this helps!
@shanehixson67063 ай бұрын
Can find the axl. Did anybody else lose theirs? What box was it in?
@MembersMarkGrills3 ай бұрын
Thank you for your inquiry. For replacement parts please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. We would be happy to send any missing parts right to your home!
@Zaid-lt2zg3 ай бұрын
I have a black v long thing under the grill there are 4 of them, do I remove them ? Because you have them removed ?
@MembersMarkGrills3 ай бұрын
Hello, sorry for the delay. We aren't sure what "Black thing" you're referring to. For questions or assistance, please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. Our agents are standing by.
@jossy5733 ай бұрын
What happens if ypu dont start with burner 1 and Or 4?
@MembersMarkGrills3 ай бұрын
Thank you for your inquiry. Burners #1 and #4 are the only 2 burners with electrodes, If you don't use those 2 burners, the igniter won't spark and your grill won't light.
@Axel357864 ай бұрын
Tilted for sure it was level at first and he adjusted to be tilted is what I’m getting out of it
@MembersMarkGrills3 ай бұрын
Thank you for your comment. Please note that the Member's Mark 4 burner griddle has a front access grease catch. This means that there should be a SLIGHT tilt toward the front (meaning the back of the griddle should be SLIGHTLY higher than the front) to ensure grease is flowing to toward the grease tray. Hope this helps!
Пікірлер
Good morning, do you have the manual online? I've looked for it and can't find it
Shouldnt the covers be over the burners themselves and not in between them? What happens when food/oil/grease drips down onto the burner itself? Over time that will clog them.
can you cook with the hood down ?
Push in and hold burners 2 and 4 for them to light.
GOOD VIDEO HELPED TROUBLE SHOOTING WITH THE START OF BURNERS #2 AND #3. THANK YOU!!
This was driving me crazy!!! I thought we received a defective unit, thank you so much for your comment!!!
It took me about 6 hrs to put this damn grill together by myself. Was i supposed to have so many screws left over?
For some reason the two middle burners don't have any propane at all going to them. I tried everything in the video and it still doesn't work even though the grill is brand new. Any suggestions?
My middle two burners are not working
Mine also, did you figure it out?
@@chicagoground same here… it works if u keep it pressed down!
@@albinantony keep what pressed down 🤔 💭
@@chicagoground sorry :P .... the middle 2 burner regulator knob
What are rods on the chain for? 🤔 Thanks
Better than blackstone
It says set the griddle on a flat surface. What kind of surface metal wood glass does it have to be temperature sensitive?
What is the best oil to use for seasoning? Regular canola oil like I season cast iron pan with?
Don't leave it outside or it will rust
I didn’t get a cover with mine 😢
Will this pizza oven be around for a while? I’m reading good things just need to save up.
Just got this for Father’s Day and I LOVE it! 👍🏾
Fired mine up today for Father’s Day. It wouldn’t reach 450 for searing in thermostatic mode. It also didn’t hold 450 in thermostatic mode. I’m kind of disappointed. I guess I should have bought a Weber.
Thank you for taking time to reach out. Troubleshooting is difficult over char. For more personal troubleshooting assistance with heating issues, please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. We would be happy to assist with any issues you're facing.
Why do you have to season the grill?
Thank you for your inquiry. Seasoning your griddle top improves the cooking performance, creates a non-stick surface for cooking, prevents damage and deterioration due to moisture and humidity, and extends the life of your griddle. Applying a coating of oil at the start and finish of each cook, will help to maintain seasoning. Without seasoning your griddle will oxidize, causing rust to appear. Griddle are also not non-stick until they have been seasoned. Hope this helps!
Why do you have to season it ?
Seasoning a griddle with oil creates a non-stick surface and protects the bare metal from rust. The seasoning process involves burning oil into the griddle's cooktop, leaving behind compounds that act as a buffer between the food and the metal. Seasoning can make a griddle's cooking surface as effective as a non-stick pan
Will call customer service during business hours, if need be. but, I got it all put together, with the exception of a few questions. Thought by chance someone might have solutions. First, I have three wires coming out of the opening that connect to side burner ignition electrodes. Attached two of them, but the third one isn't mentioned iin the instructions. directions and doesn't appear to have a home. Second, on the inside electrode panel, there is what I assume to be a ground, What do I attach it to? The side wall? One of the screws that holds that panel in place? On that same note, is it imperative to have that plastic sleeve in place for the electrode wires? Doesn't appear to be room to put it anywhere, and is hard to get it to hold the wires. Third, the part labeled K, the little chrome hook, or whatever it is, is labeled in the instruction manual for the wheel install sequence but nothing is shown to as where it goes. Directions seemed spot on. Used KZread, paper manual and Bilt app. No parts left over, except the K I mentioned.
Thank you for reaching out. It is hard to answer questions via comment, as there is nowhere to post images. BILT is your best resource, as you can pause, rewind, zoom in and rotate the 3D image. Question #1: There are 3 electrode wires go as follows: 2 wires plug into the back of the ignition button 1 wire plugs to the side burner electrode. (see image on step 17 in manual) Question #2 The ground wire has 2 sides. The plug side goes in the front. The loop attaches at the back with screw E (see image on step 3 in manual). The sleeve on the wires is just for the customer’s benefit to keep wires neat and together. You may find that you have to pull the wires down with a firm tug to fully get the wires out from under the control panel. Question #3 Hardware K is a tool. It fits into the holes on the casters, to keep the casters in place, in order to screw them onto the bottom shelf without the casters spinning. (See image on step 1 in manual) Hardware K will only be used during assembly but will be discarded at the end. For questions or assistance, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Hope this helps!
Thank you for the video, super useful!
Love to grill, however, we can't get the gas igniter to ignite😮
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
Nice. Mine won’t even turn on.
Thank you for reaching out. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
Just walked around the corner to check and mine thought it was out of pellets, they just quit falling in. Dominion locked into err error code regardless of filling these steps, plus more. Last year support sent me a new controller which worked fine after that swap out I guess tomorrow I will blow air through it a couple times just in case there is a hang up at start up. Heck of a thing to spend $400 for a dozen used 8 of which ran correctly My auger is clean as a whistle, it just “funneled” and stopped feedings pellets to the auger Everything lives in the garage never seen a night outdoors So it’s not moisture related
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
Is this discontinued?
Thank you for your inquiry. The Member's Mark Pellet grill is still available at some Sam's Club locations but only while supplies last. Once they are sold out, they will no longer be available. Hope this helps!
Does grill lift out of stand
Thank you for your inquiry. The charcoal grill and workstation are 1 unit when fully assembled. Hope this helps!
I’ve had mine since December and I can’t get the temperature setting to display
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected].
When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help
I replied on a previous comment, but just to reiterate: Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!
When assembling the grill, the wires fell out and now I’m not sure how to connect them. Please help
Thank you for your inquiry. Troubleshooting is difficult over chat as we don't have the option to send attach images or diagrams. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]. Alternatively, there is an interactive 3D app called BILT that is free to download for both iPhone and Android users. Many customers find it helpful during assembly, as you can zoom in and pause the instructions on a 3D app that can be rotated 360degrees. Hope this helps!
Please recommend a rotisserie kit for this model. Thank you in advance.
Thank you for your inquiry. There are rotisserie mounting holes pre-drilled into the firebox for a rotisserie. The specific item number for a rotisserie sold at Sam's Club is Item# 990133827. However, this item is currently out of stock. In the meantime: The width of the firebox is: 28.6" (72.7cm) you can use this width to find a rotisserie kit that will fit your grill. Hope this helps!
I don’t have a click at all is my starter pilot bad?
Thank you for your inquiry. Troubleshooting is difficult over chat. For a more personal/helpful troubleshooting experience, please reach out to customer care by phone or email at: 1-833-454-0864 [email protected]
Quick question does anyone know if we could cook a Turkey for Thanksgiving on this grill? My oven is messed up and the owner doesn’t want to replace it. I bought this grill and we like it ❤❤❤
Sorry for the delay, The Member's mark Pro-Series 4 Burner gas grill does come with pre-drilled holes for a rotisserie bracket. The firebox width is 72.7cm (28.6") These measurements will help you find a rotisserie kit that fits. Hope this helps!
@@MembersMarkGrills you can do a turkey without rotisserie, just use a large aluminum foil pan and butter up the turkey and cover with foil. remove the foil for the last 30 min to brown the bird.
Which weber grill does this compare to?
What is the size of the actual griddle
Sorry for the delay. The DIMENSIONS of the griddle top are as follows: Length: 91.4cm (36") Width: 50.8cm (20”) Griddle Top Thickness: 4.5mm
With the exception of the cover and the charcoal baskets non of the parts are compatible with the weber 22 kettle or 22 preformer. It appears this was done by design.
Hello, For parts for your Weber grill you will have to reach out to the manufacturer of your grill. (Weber). As we do NOT manufacture weber grills we do not have access to their parts to offer replacements.
I love this grill. Purchased on sale for $165 last year and it doesn’t disappoint. It’s heavy, beautiful, functional, and assembly was a breeze. If you have challenges reading directions and organization please find something already assembled. I purchased a smoke box for the inside and use this grill twice weekly for meals. My best purchase out of last year. Now the glass version is available but I’ll hold out on that one until the price drops significantly. The new pellet grill is on my sights just waiting on a good sale.
Can’t wait until this one goes on sale. I have the prior version without the glass viewing area and it’s a beast. Temps get to 700+ if you open your gas valve.
When you think it will go on sale?
@@keltis1844 it’s dropped from its initial price of 499. USD to 399. USD but normally deep discounts are in fall/winter. I purchased the previous version of this one without glass insert for 169. USD in October 2022. Hope this helps with planning.
@@tmason1636thank you! I might just get one now & a spare when price drops in OCT. 😊
@@tmason1636 I looked at reviews on this and got a question for you …did you have issue with the middle two burners lighting up & staying lit? That seams to be an issue with complaints .
@@keltis1844 I had the issue if I rip the tank open all the way. But after I read the manual it said to slowly open tank valve. Haven’t had the issue since. That issue happens because of the built in overflow protection device.
2024 or Father's day
Greg's Birthday gift 😂🎉😊
Got mine together EXCEPT FOR the 2 screws that won’t fit the side rack. Weird.
One of the best grills I have ever had.I had fun putting it together. A little challenging but not too hard only fun.
Thank you for this video. Easy to follow and worked great. The wiring harness instructions wasn’t the greatest but it worked. 👍
Boy... I really should have watched this video I've been wondering why the middle burners always seemed to shut off
That is what we are here for. Glad this video helped :)
Do you get uneven cooking on yours with the oven mode?
Looks like bad, I’m excited too cook some fajitas tho tho
Will the glass in the viewing window shatter if it begins to rain after grilling?
Thank you for your inquiry. The Viewing Window is constructed from tempered glass. which was specifically selected due to its ability to go from hot to cold without shattering. Hope this helps!
Can find the axl. Did anybody else lose theirs? What box was it in?
Thank you for your inquiry. For replacement parts please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. We would be happy to send any missing parts right to your home!
I have a black v long thing under the grill there are 4 of them, do I remove them ? Because you have them removed ?
Hello, sorry for the delay. We aren't sure what "Black thing" you're referring to. For questions or assistance, please reach out to customer care by phone or email at: 1-833-454-0864 or [email protected]. Our agents are standing by.
What happens if ypu dont start with burner 1 and Or 4?
Thank you for your inquiry. Burners #1 and #4 are the only 2 burners with electrodes, If you don't use those 2 burners, the igniter won't spark and your grill won't light.
Tilted for sure it was level at first and he adjusted to be tilted is what I’m getting out of it
Thank you for your comment. Please note that the Member's Mark 4 burner griddle has a front access grease catch. This means that there should be a SLIGHT tilt toward the front (meaning the back of the griddle should be SLIGHTLY higher than the front) to ensure grease is flowing to toward the grease tray. Hope this helps!
Same