Pete, Always following you with pleasure. You’re a great person and I wish you great success with your YT channel.

@peteshobbies5383

4 ай бұрын

Hi Boyan, Thank you for watching mate, It's good to hear you're enjoying the channel , it's is much appreciated. Cheers 👍

I don't know how you do it Pete, but every time I have a question or decision to make... you post a video precisely abot the subject 🤣🤣🤣

@peteshobbies5383

4 ай бұрын

Great minds think alike Pawel, when I do theses back to backs there is normally something going on in my mind as to what gun is competing with what for the customers money, this seems a logical match up although as you can see, apart from size they are quite different 😉, cheers buddy 👍

i was looking forward to get home make a coffee and enjoy the new video !!!

@peteshobbies5383

4 ай бұрын

Thanks buddy, hope it didn't disappoint , thanks for watching, it's much appreciated 👍

At work tonight it's the start of my 3 day wk , nice video Pete 😊😊😊

@peteshobbies5383

4 ай бұрын

Hi Dean, thanks mate, hope work goes okay. I appreciate it, buddy 👍

Sehat sobatku, tetap produktif untuk mengunggah vidio

@peteshobbies5383

4 ай бұрын

Terima kasih sobat, sangat dihargai 👍

Another great comparison Pete. I was wondering how do you keep overspray from getting on your camera? Thanks

@peteshobbies5383

4 ай бұрын

Hi John, Thanks, mate , the camera does get some on it, that's why sometimes the image is a little cloudy, I just clean the screen and lens every time it goes on and off my head, so around 4 or 5 times wile making a video. I normally just dab some thinners on a paper towel. The lens and screen are glass, so it doesn't harm it.

Apologies if I missed it in the video, but what size compressor do you use or recommend for these guns? Thanks!

@peteshobbies5383

2 ай бұрын

Hi Buddy, Meiji uses around 2.8 CFM and the LPH80 around 2.4 CFM, so the compressor doesn't have to be that big

As I understand these “mini” guns are for spot repair and the one or two panel jobs. I think they both shine at this, but the LPH80 stays my favourite (as a would like to have).

@peteshobbies5383

4 ай бұрын

Hi William, These are used by a host of different trades, as you say, automotive spot repairs but also by furniture makers, scale modelling, tanning studios, guitar finishers, and others , so very universal. The LPH80 is a lovely little tool, so keep striving for it. Hopefully, you'll get one soon, cheers, mate 👍

Hi Pete, a really good comparison there mate as apart from the fan size there is very little between them yeah the LPH80 is a bit slower but I wouldn't see it as a deal breaker👌the Meiji seem to put out more overspray but that could be due to it's bigger fan size as more of it is missing the panel and going into the air🤔 When you was mixing the clear you put the clear and hardener in as usual but before you put the thinners in you added something from a different bottle but it was only a tiny splash that you put in the cup🤔I'm wondering if you use and accelerator🤷‍♂🧐like you mate I normally add a bit of thinners to my clear even if the TDS doesn't call for it🤓😎 Cheers Pete👍

@peteshobbies5383

4 ай бұрын

Hi John, Yeah, these are two guns that on paper and size look very similar, but they are quite different, so I thought I would point that out, and this shows it rather well. The little something I mixed was as far as I know, just adding a little more clear as I had overdone it with the hardener, it shouldn't make a difference but best to keep both clear mixes the same for a comparison I guess Cheers mate 👍

What colour is that on the wing looks similar to the podium green by Aston Martin

@peteshobbies5383

4 ай бұрын

Hi buddy, it's a custom colour that I bought a few years ago, I still have some left, here's the link, nuagane.co.uk/product/1lt-neat-basecoat-extreme-sparkle-laser-green-car-paint-custom-colour/

@jakiechin3774

4 ай бұрын

@@peteshobbies5383 that’s great thank you for the link, keep up the good work really enjoy your videos 👍

@peteshobbies5383

4 ай бұрын

@jakiechin3774 You're welcome buddy, thanks for watching 👍

Hi Pete! Wow, the results are indeed stunning 👍 The more I watch your videos, the more I discover about smaller guns and the more I wonder if I did a mistake buying a "big" gun (R500) for my motorcycle fairings 😂 I was really appealed by the air consumption but is was a lie unfortunately as you mentioned in a previous video 😕 I'm wondering, do you think it's possible to setup a full size gun to work as a mini one by reducing the fan and fluid to put less material for smaller jobs and stencils (and maybe reduce air consumption as a side effect)? Kind of the reverse of what you do in this video 😂 Thanks again for sharing these videos, I love the fact you're painting smaller parts and I learn a lot!

@peteshobbies5383

4 ай бұрын

Hi Mate, It is possible to set a bigger gun up like a mini as far as fan and fluid output is concerned, but it's not going to atomise particularly well. The biggest drawback will be air consumption. You will need the pressure, in the case of the R500, of around 2bar so 29psi, so even with a smaller pattern and less fluid output, your air consumption will be the same as if it were set up for using it as a full size gun. I had never tried to spray one of these panels with these. They surprised me how easy they did it, I thought they would be really slow, but they weren't all things considered , cheers buddy 👍

@polhomarkho5229

4 ай бұрын

The more I watch your videos about the miniguns and lph 80 in particular, the more I think it could be the gun I need. I have a small capacity compressor (24L silent one so low cfm) and as I live in the downtown of my city, I want to keep the sound and overspray at a minimum even if I work in my garage. Do you think I go wrong if I buy one to paint small stuff like motorcycle parts? It's quite pricey but it seems like it's the best gun that matches my requirements Thanks again Pete!

@polhomarkho5229

4 ай бұрын

Oh, I forgot to ask, is it ok to paint pearl or metallics with the 1.2 tip? I regularly see that you need 1.3 or 1.4 for basecoat and 1.8 for primer but it doesn't seem to be the same for mini guns Does the gun size matter to choose the tip size? I'm scared pearl could clog the smaller tips Thanks and have a great evening!

@peteshobbies5383

4 ай бұрын

Hi mate, the LPH80 would suit you without a doubt, yes, they are expensive, but they are very good . They use around 2.2cfm with the E4 cap, so they are suitable for even the smallest compressors, yes, you will have to be patient as they are slow, sometimes frustrating so but this is a small price to pay for something that fits you brief perfectly in all other respects. 👍

@peteshobbies5383

4 ай бұрын

There's no pearls or metallics that would clog a 1.2, 1.0, or 0.8 for that matter, metal flake, yes, but that's a bit more specialised. Primer is different. You will get away with primers, but higher build primer would need a bigger tip unless you thinned it down a fair bit, which means lots of coats it your after a higher build. Personally I would buy a cheap 1.2 or similar mini, like the ANI GF3 and use that for primer and keep the LPH80 for the base and clear, primer is horrible messy stuff so I try and keep it out of the better guns

Pete is there a cheap/chinese gun that falls under the same category as these 'micro' mini guns? Cant find much out there thats cheap that truly uses low psi/cfm.

@peteshobbies5383

27 күн бұрын

No mate, it seems the Chinese can't make good mini guns

@ivanzgibor9746

24 күн бұрын

PRONA RH-90F, PRONA RL-90F/R = Iwata LPH-80, Iwata HP-G3.....

@tommytangle3392

24 күн бұрын

@@peteshobbies5383 i bet Petes already placed an order!

Hi Pete, do you think the LPH80 is a viable option for lacquering wheels? I currently use a SATA minijet 4400 in 1.2 setup and cant fault its application, but I need a second and have a few LPH80's around me in 1.0 setups that I could always repurpose. Or are there another mini guns you would recommend that spray like the SATA, but without the price tag 😂

@peteshobbies5383

4 ай бұрын

Hi mate, The LPH80 is used by many for wheels. It is ideal for that. I know some like the Sata Minijet because the fan wheel on the side is easy to adjust on the go, when you say like the Sata what's the things you like about it? Let me know and I'll try and make a few suggestions

@MrCliveusMaximus

4 ай бұрын

@@peteshobbies5383 thanks for that Pete. I like the SATA for it's fan size, atomisation and just the way it feels in general. I've tried the iwata AZ4 in both 1.2 with a number 1 cap, and a 1.3 with a number 2 cap, but I didn't really get on with either (although I did prefer the 1.2 with number 1 cap out of the two setups). They both just felt a bit clunky and cheap I guess, and I couldn't get my flow right for the life of me - dry spots and runs everywhere!

@peteshobbies5383

4 ай бұрын

@MrCliveusMaximus Hi mate, The fan size on the Sata is big for its size so I wouldn't think an LPH80 would be what your after, take a look at the Iwata W50 Kiwami or W50 Bisho, both side cups but like an LPH80 on steroids, this Meiji Finer Spot is also excellent and has a big fan for it's size. The AZ4 is a bit clunky for sure, but it is obviously cheaper. The Meiji Finer Force guns are also excellent. This video may help with judgment on the Iwatas mentioned above, it gives an idea of fan size, all atomise brilliantly, kzread.info/dash/bejne/a6R7j699hJm2h7Q.htmlsi=dhyol2LQsFWZbG94

@MrCliveusMaximus

4 ай бұрын

@@peteshobbies5383 thanks Pete - much appreciated!

@peteshobbies5383

4 ай бұрын

You're welcome mate 👍

What scale are you using?

@peteshobbies5383

Ай бұрын

Hi Mate, I just use a cheap set that came with my paint scheme, I have a better set that hooks up to a PC but it all take up lots of space and I seem to get on fine with the little set

@tommyboi70

Ай бұрын

@@peteshobbies5383 looked like it reads the weight rather quickly. That's why I asked. The cheapy one I had was slow and I kept over shooting my target weight

@peteshobbies5383

Ай бұрын

@tommyboi70 Yes, it's instant, it obviously needs to be, where are you, I can send a link but it a UK ebay link

@peteshobbies5383

Ай бұрын

Here's a link, people sell the same scales in the UK, but as soon as they mention paint in the advert the price goes up 300% 😂, www.ebay.co.uk/itm/353529841795?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=y4x7_hfvsck&sssrc=4429486&ssuid=v5EZyL9iR9-&var=&widget_ver=artemis&media=COPY

How do you ever decide on which gun to use for a project? Names in a hat? haha

@peteshobbies5383

4 ай бұрын

Hi Mate, It's isn't easy, believe me 🤣😅😂, cheers buddy, thank you 👍

Man, I am sure you have thought about creating your own brand 😂

@peteshobbies5383

4 ай бұрын

Now there's an idea 🤔 😂, thanks mate 👍