FINALLY someone who gets it and just doesn't gear the bike to do 90 mph and then wonders why top speed went down. I have tried and tried to explain this to guys and it just doesn't sink in for some reason. Rider weight will factor into this, whats your weight?

@Black66

2 жыл бұрын

Yes , rider weight , tire height, etc

@zacharysmith737

2 жыл бұрын

True the motor has to be able to handle all those factors I however got mine stock at 22.4 mph and im a bigger stronger guy and weight under 400 pounds and tge fastest I git it to go was 27.1 mph on stock that was before my dad put the spring back to how it was and at first it only went like 13.4 pumped up the tires some and boom instant increase in speed and it takes me fast up some hills but others it slows down about halfway stays about 2.2 mph when it slows down up those harder hills my motorized bicycle has a 100cc 2 stroke motor and it carries .e way faster were talking about 32 to 35 mph on flat and it goes right up other hills besides my road and the other one that's way longer and steep I get up if I pedal which to me is no big deal because I love biking anyway for my motorized bike I bought a bigger rear sprocket and heavy duty chain because the stock chain kept breaking and caused me two accidents or it would lock up and my mega moto maybe if I do this to mine it'll be much better like my motorized bike its fun to ride and sometimes upgrading or playing around with this stuff is fun😂

@agkracing140

Жыл бұрын

The importance of gear ratio is commonly overlooked by our customers. Great video!

@JViello

Жыл бұрын

@@zacharysmith737 The governor is holding you back along with too low of an rpm engagement point on the clutch. Zip tie the governor spring (look it up if you don't know what I'm talking about) to raise rpm but not totally kill the governor and order a 2500rpm clutch ($30?) and it will change everything for you. You might want to gear it down with a larger rear sprocket as well if you're a big dude...will also help a lot.

@zacharysmith737

Жыл бұрын

@@JViello I did have the bigger stock sprocket I went either a smaller one but now if I want a bigger or to put the stock sprocket on I'll need a new chain and I tried the videos the ziptie didn't want to fit through either spring and I may Have messed something up trying to do that idk which spring it is because the videos I saw were not for my specific mini bike they looked different in where the springs were idk if its the one under the gas tank or one of the two that seems to control the governor or throttle I also but a 3100 rpm max torque spring I my clutch and it didn't seem to help at all my dad thinks it's because the engine can't handle it its 80cc I think 2.5 hp maybe and the idle speed is 1600 rpms is he right would a spring thats rated higher than my mini bikes engines rpms make it lose performance instead of helping it he suggest I put the stock one back in or go lower and currently I'm having an issue with the recoil which I think may just need to be lubricated and it'll start if it's off the ground but it won't start if I have it on the ground so idk if the spring is too much or if the clutch is stuck I noticed when I recently put the clutch back on it wasn't spinning that freely in my hand so I think that might be why it's being such a pain to run anymore so I was gonna try Putting my stock spring back in

We appreciate the hard work man, keep it up.

Finally, I've been waiting for this video all day✌🏼

You are a Brave Man. Great video. 👍👍

Holy cow, That bike accelerates wicked fast! Awesome video👍👍

@gregsteele9002

2 жыл бұрын

Right? That's almost like a supercharged Pontiac GTP 0-30

you definitely deserve more subscribers!

Black66 This Has Been One Of My Favorite Builds

love the vids keep them up

Ooohhh yeahhhh new black66 video…dropped a like before I even watched. Good stuff bro!!!

@sbfguy7793

2 жыл бұрын

Same here. He never disappoints.

@Black66

2 жыл бұрын

Thank you!

@Black66

2 жыл бұрын

@@sbfguy7793 Thank You!

Drinkin beer and eating chips and I can’t stop watching these hahaha. Cool Stuff man

@Black66

2 жыл бұрын

Awesome! Thanks!

That’s really fast.Great video.

I think from a lifetime of having problems w/ internal combustion engines I have PTSD from it and I hate them now, I only want electric bikes now..... Already have a 48v 2000w Razor Mx650 that's going to a 72v/80v 6000w kit hopefully this summer but I also want to start doing electric bike repair to fund my build. Gotta figure out how to do it on a very limited income.... Your electric builds are a lot of help because I can see what works and what doesn't work so thank you for sharing your experience.

@Black66

Жыл бұрын

Thanks! More e-bike builds coming!

Great looking bike! Hope to see some new builds or some old mods soon! Spring time is coming!

@Black66

2 жыл бұрын

Thanks! I have some more stuff lined up.

@ryanbailey9806

Жыл бұрын

@@Black66what was the rear sprocket teeth count im asking because i have the same 80cc engine im putting on a occ chopper bicycle and needing a decent top speed for daily commute

You really do some nice work kudos to you

@Black66

2 жыл бұрын

Thanks!

That's Kickin' Butt!!!!! 72mph hell yes 👍

Good run !

Bro you showed out with that motor man what's the specs and that's a 224cc!!! Man that motor get down!!!! Absolutely powerful!!! Love it!!!

@Black66

2 жыл бұрын

Thanks! Check out the playlist for this bike. It has the specs in the description of the engine build video. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

I like how the brakes stop the bike after going that fast. Awesome

Great info

Hi great video 👍🏼. Do you have any suggestions for vibration through the handle bars? I was thinking of purchasing gel gloves to help. Do you have any videos on engine mounts to eliminate some vibration thank you

Im surprised you’re not venting that case from the billet side cover. Might Relief some pressure if you vent it out and get more rpm? Maybe lol idk dope bike. Great content

@Black66

2 жыл бұрын

Thanks! The valve cover I use has a baffle that does a good job controlling oil . I think a lot of the valve covers out there are just for looks and dont do a thing for oil control. They dont have baffles. Never had an issue venting with these covers. I really like the clean look without the lines. Even if it does give up RPM. Its gotta look good even if it doesnt run LOL

perfect example to this is the science my brother in law and I did, We tested multiple gear ratios using a 30 series torque converter, and a 3600rpm engine and 18 inch tall tires. We tested, 9/60 9/54, 9/48, 8/60, 8/48, 10/60, 10/54 now some of these are the same ratio just different set up. Every single gear ratio ran a top speed of 46mph no matter the ratio was 46mph. Using a 8/60 we determined to be the best. It takes off very quickly, still has the top speed and 1 drive belt lasts us a very long time. Still on the same belt and it's been months.

Man you need to go to work for Kawasaki they need some good help over there 😆

I have a question do you have to get aftermarket clutches and sprockets to upgrade this because I don't see them specifically upgradeable on this so I'm assuming you have to get an aftermarket part to upgrade this.

Another excellent video, very helpful too. Which gear calculator do you use? I have some knowledge of how this works but not as much as you do, I’d like to learn a bit more for when my time comes for my build I’ll be better prepared. Thanks again for posting and ride safe.

@Black66

2 жыл бұрын

Thanks! Here is a link for the calculator www.gokartsupply.com/ratios.htm

I got a mega moto 80 roller frame coming on friday, just to decide what motor to mod and put in it…seems like thats perfect gearing for that bike. Great video once again!

@romancedennis290

Жыл бұрын

Did you get it

Bad Ass. Get a Drag frame and throw these engines in there. Great Work.

Hi great video. Have you tried a 17 tooth clutch with a 60 tooth sprocket? If so what top end speed did you get. Thanks

u can tell the cam starts kickin in about 35 MPH. thx again for your time.

@WyFoster

2 жыл бұрын

That's when the clutch locks up. Those have a 4,000 rpm stall.

Hi I hope you had a great 4th of July! I was wondering if you could pls do a video specifically on how to line up the chain on a small minibike such as the doodlebug! I just acquired one of these and I cannot get my chain to stop jumping off even with the tensioner that it comes with I’m sure I have my motor lined up wrong please do a video on this problem I’m having thanks!

That's a rippin' a$$ minibike. Nice.

Love the comparison vids. 72mph that's pretty sick bro. 🔥 I've got a Wolf Blaze 49cc scooter with a 80cc big bore kit big valves I forget what cam came with it. Do you know what the gap should be on the valves ? I gapped it to what was recommended but they are chattering a bit 🤔 Love the content bro keep it coming 🔥👍✌️

@Black66

2 жыл бұрын

Thanks! Thanks for watching the videos! I'm not sure on that one. I haven't worked on one of those before. You could always tighten them up a bit.

@EJ-74

2 жыл бұрын

@@Black66 👍

Thanks for the great videos! What motor and upgrades do you have on this motor??

@Black66

Жыл бұрын

Thanks! The engine has a 58MM stroke with a 275 cam ,Tillotson 225 head. Check out the Mega Moto Playlist for the entire build. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

Wow, Going that fast gets Dangerous! i would like to see you install a front brake and measure the stopping distance of rear brake only vs front & rear brake togather.

@Black66

2 жыл бұрын

I did something similar to that in this video. Here is the link kzread.info/dash/bejne/rHdq06mrl8mbZ7g.html

The start is rough but when it goes it goes haha damm

Hell yeah!! That thing was moving. What size cam does it have?

@Black66

2 жыл бұрын

Dyno 278. Check out the build playlist for this bike kzread.info/dash/bejne/iJaX0qNpmse5edo.html

I think I'm starting to understand. Thank you

That's a damn rocket lol

I have a stage 2 predator ( billet fly wheel rod 265 cam and 22lb valve springs) also has 22mm carb and open exhaust. I’m trying to get to 70mph. I’m currently running 12t clutch and 40t rear sprocket on a monster moto 80. I got it up to 64 but it has 0 take off ! Should I switch to a 18t clutch ? Would that make it have take off and still do 60+ mph ? Also should I swap out the 22lb valve springs for maybe a 26 ?

I've been looking for a 5/8 bore 8t centrifugal clutch 40 chain. Any idea where to get an 8t. My go-karts drive sprocket is so big I had to reduce to a 45t for ground clearance drive sprocket and I need to make up for torque all I can find is 10t for the 40 chain and 12T for the 35 chain

hey buddy I'm a big fan from your first video to now but I got stock motor on a Coleman mini bike what could I do to make it way faster it goes about 30 maybe a little over not much I bot the carb kit off amazon and I would love to go about 55 mile hour please any thing helps keep up the good work

I have a monster moto 105cc and was wondering could you recommend an exhaust? I’ve already upgraded my carb and am looking for an exhaust. Thanks for the recommendation on the speed app too currently clocked at 33 mph top speed

Needs NOS or turbo or even a small super charger... Maybe some wheelie bars & parachute 🤣🤪🤣 I'd say the gearing is damn near perfect for your set up.

still have the orig 80cc had it since 7 to 8 years got for moving stuff at age prob 9 or 10 currently trying to fix it up

Hey once again awesome video man great info I’m always surfing KZread looking for your next video man I love it now I am desperately looking for someone in my area that can give me a good deal on a roller minibike frame other than that can you tell me just a few lighter things I can do to brand new 224 to have fun and not risk blowing it up? I have not even taken the motor out the box yet! And can you recommend a good name brand clutch that’s affordable that I can start with? That cheetah looks great but I know that’s a bit advanced and I don’t have any power yet😔 that will come later but for now I want a clutch that will last me until I’m ready for some bigger mods thanks as alway for the awesome 👏🏽 content

@JVScustoms

2 жыл бұрын

I got the mega moto roller from go power sports and I love it!! The ridged roller is right around $300 I think. I got mine on Black Friday sale for $280 and they sent me the suspension one. Those go for $380ish normally. I just got one of the 224 a couple weeks ago myself. Gonna go get all my billet parts here in just a couple more weeks and I can’t wait

@Black66

2 жыл бұрын

Thanks! Just throw a Bravex or a FDJ or a Max-Torque on it for now. They are inexpensive and durable enough . It will last just fine until you upgrade later.

So I tried putting my air filter on my 224 just a air filter and it would bogged when I tried to give it throttle any suggestions? I put stock one back on for now 52 mph with just a exhaust loving it 😂

I want one of these so bad

Hey bro not sure if you will see this comment but I need to speak with you I watch you channel all the time I need your input if that’s possible great job and thanks for all the hard work you put in

@Black66

2 жыл бұрын

Thanks! What do you need help with?

@allblackeverything9975

2 жыл бұрын

@@Black66 Bro I have a stage 3 tilly and I’m trying to get the most out of it I’m also putting it on a 100x just need your input do you have a email are number

@Black66

2 жыл бұрын

@@allblackeverything9975 doubledown555@att.net

I'd like to see the same exact experiment but only changing the rear sprocket

Whereabouts do you acquire one of those clutches

Where do you guys get those upgraded clutches with different teeth are they also made for 40/41/420 chain?

@Black66

2 жыл бұрын

Yes, there are many different clutches with a 40/41/420 Check out the playlist on this bike . In the engine build video it has the links to the parts used. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

ALRIGHT!!!

What brand of clutch is that? I’ve never seen that before where it’s interchangeable. Also what size engine is on there? Will a 212 fit on that frame?

@Black66

Жыл бұрын

Check out the Mega Moto playlist. It shows the entire build. Thanks for watching! kzread.info/dash/bejne/iJaX0qNpmse5edo.html

Hi Great Video is the Frame custom or can you buy one off the internet.

@Black66

2 жыл бұрын

Thanks! The links are in the description for the parts used in the build. Thanks for watching.

I can't be the only one that wants to see some big block content. Anyone else with me?

U ever mess with the stall speed of the clutch ? And have u considered a manual clutch wear u could scoot it off the line then maybe use a clutch kick around 30 to rev and launch a little from a roll maybe get a wheelie out of it

Dang that is so impressive of it hitting 40 and its not even in the powerband yet

Where do you get your mini bike stuff? I’d love to know. I increased my top speed from 20 to 50. I want better brakes, a new good clutch that’ll hold up. Also I want to do some engine mods

@Black66

2 жыл бұрын

The links are in the description for the parts used on this bike. I get parts from quite a few different places. The frame , wheels and gas tank are from GoPowerSports in this build.

Is your tank mount a manufactured part or something you made custom?

@Black66

6 ай бұрын

Check out the Mega Moto playlist for the entire build series on this bike. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

@black66 what app are you using for 0 to 30 and top speed

@Black66

Жыл бұрын

I use digiHUD along with the camera GPS for top speed and a Dragy performance meter for 0 to 30

I would like to see just how fast that style motor could get to using a gear box. Your going from 0 to 70 with no trouble at all. What if you had one or two gears left to go to.?????

Can you build one of your Coleman bikes that goes 70+ mph

Hey there do u have links for wheels and the front suspension as wells as handlebars

@Black66

2 жыл бұрын

Yes, Just updated it. The front suspension, handlebar and wheel links are in the description. Thanks for watching the videos.

Have a 15 clutch and 75t on the back with a ghost motor with Stage 2 kit and stock carb on 6in street tires with the 15 clutch what does it drop the back sprocket to. Thanks

@Black66

6 ай бұрын

Check out this gear ratio calculator www.gokartsupply.com/ratios.htm

WoW!

I'm running 12 tooth on front ..75 on rear with ghost predator..good or bad..?

Cool 😎

What chain breaker do you use and put it back together

@Black66

2 жыл бұрын

ARC racing breaker

I like your videos. What stage is the motor?

@Black66

2 жыл бұрын

Thanks! It is a 223 stroker. Check out the playlist for this bike. It shows the entire build kzread.info/dash/bejne/iJaX0qNpmse5edo.html

What clutch are you using that thing looks beefy I need a good clutch tired of replacing cheap ones.

@Black66

2 жыл бұрын

Its a Noram Cheetah

@eaglesfan1998

2 жыл бұрын

@@Black66 thank you !

Any reason why minibikes don't use a comet type CVT, instead of a clutch + chain drive..

@Black66

2 жыл бұрын

Some do depending on the bike. I have one on a few bikes on the channel. Check out this playlist kzread.info/dash/bejne/imSHz6OTepnXh5s.html

What kind of mini bike is that? It’s nice and runs good. How much does a bike like that cost?

@Black66

Жыл бұрын

Its a Mega Moto 80/105 frame. Check out the MM 80/105 playlist for the entire build kzread.info/dash/bejne/iJaX0qNpmse5edo.html

Would love to see a wave of 'dumb dumber' road trips with these things.

Can you provide a link for the gear ratio calculator please??

@Black66

Жыл бұрын

www.gokartsupply.com/ratios.htm

Can you take the performance parts off this engine and slap them on the new predator 224?

@Black66

2 жыл бұрын

The engine on this bike has the same stroke as a Predator 224, 58MM. Check out the playlist. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

I got a max torque clutch for my non hemi 3/4 it's really snug do I just rubber malet and pound it on or can I take a file to the keyway on the shaft what would be beneficial

@Black66

2 жыл бұрын

Make sure the shaft is clean with some fine sand paper or steel wool or a scotch brite pad and some wd 40 or something like that if it's super dirty. The clutch should slip on pretty easily. You can tap it on there if you want but if you ever want it back off you will need a puller.

@keithbrown7088

2 жыл бұрын

@@Black66 as always I appreciate it 🙏🏼

🔥🔥🔥🔥

What do you feel is a safe continuous rpm, mph for the build on that engine. 70 is amazing 👍

@Black66

2 жыл бұрын

The internals should be OK running the RPM in this video. I think the weak link on this engine is the stock Predator block .

@larryegilman1

2 жыл бұрын

@@Black66 does the tillotson 212 have better stock internals and cases. Actually with your history with small engines have you thought about opinion videos comparing components of the mini’s like you did with the two cams, and clutches. Frames, forks, brakes available and stock, and so on. From your videos, you obviously have a lot of enthusiasm and knowledge of your sport. And thank you for the time you spend in replying to us

@Black66

2 жыл бұрын

@@larryegilman1 Thanks for watching the videos! Yes, I think the Tillotson does have better block and internals than the Predator 212, but the new Predator 224 has definitely stepped it up a notch in quality. The block is similar to a Tillotson or Ducar block. If not the same. The 58MM stroke of the 224 is inexpensive compared to what you would have to pay to get a 58MM stroker kit for a 212. It's fun doing comparison videos. I might get around to comparing some of that stuff at some point.

Where can I purchase a mini bike similar to yours? Great set up you have 👍🏻

@Black66

2 жыл бұрын

GPS sells the Mega Moto 80 roller frame

Need a bigger sprocket on the front when using a smaller one on the rear to keep up the torque

@Black66

2 жыл бұрын

Every tooth you add the the front sprocket is equivalent to removing six teeth on the rear sprocket . So by adding teeth to the clutch you are essentially removing torque.

We're did you get your chain an sprocket from an that cheetah at?

@Black66

2 жыл бұрын

I put links in the description of the video for both the clutch and chain

@GliblyUnited8billion8

2 жыл бұрын

@@Black66 it's funny because my bolt that you grinded down just fell straight threw lolz I definitely might have more questions but I need to get a power tool first to get these bolts off because using vice grips suck

That's crazy. Even if i only go 40 mph i feel the whole bike start vibrating like it's about to fall apart on me lol. I'd be too scared to do 70 on it. Is there something you do to keep the ride nice and smooth at higher speeds ? Wonder why mine vibrates so much from 40 and up ? Pretty sure i tightened all the bolts tight enough unless certain bolts are coming loose but i don't think so.

@thefishingchannel3192

2 жыл бұрын

It might do that if you have off road tires on it

@thefishingchannel3192

2 жыл бұрын

I know when I ride it on the road my bike shakes once I hit top speed and I have low tread on the tires 😂

@Black66

2 жыл бұрын

This bike is running street tires . Check out the play list for this bike . It shows all the mods. kzread.info/dash/bejne/iJaX0qNpmse5edo.html

@doodlebug6833

2 жыл бұрын

Honestly so much may go into this. some frames have inherent design flaws(lack or excessive camber, narrow framed, lack of proper reinforcements like gussets in corners of vital areas causing frame flex), tire pressure, bent frame, Crap toloerances, messed up rotational balances (ie. axle alignment and sidewall bubble on tires). Is the the axle offset to the frame. At this point you to start measuring everything if you dont notice any easy to see things(like a bent frame, offset axle, bad camber, chewed up front spindle, so on so forth) Fix those issues First! New tires and parts dont mean S*** if they dont fit right or at all. After, you change one thing at a time and double checking that nothing has changed in your variables. Street tire will help, but take you time with this. If you are uncomfortable with all this, find some one who is. You never know what will happen if you crash at them speeds, the price could be you life or the life you know. Good luck and be safe! Hopefully you can travel time one day.

@doodlebug6833

2 жыл бұрын

​@@Black66 too many accidents seen and experienced from small, big, dumb ,and hidden XD. I completely agree, frame replacement is the best option, but there needs to be an order of which he goes about the diagnosis of his issue. Tires just may not be the only issue here since we don't have the exact machine. What i said isn't applied to your response as it was more so towards his individual scenario. Which I should've of done is @'d jason and explained the process instead of details, sorry about that if there was any offense. The playlist is a good idea for him to review for information on how you got to where you are and to see a proper process of how this bike is brought together and responds. Yet, we don't know jason's bikes condition, it could be a new one for all i know. After dealing with different types of blind diagnostics and different outcomes seeing the machines first hand, there's one quote that has stuck with me since i heard it from pawn stars XD "You never know what is coming through that door." -Rick Harrison

Rolling on that little bike. Are you running gasoline or methanol or…. That thing is set up nice.

@Black66

5 ай бұрын

Its running gas. Check out the Mega moto playlist for the entire build. kzread.info/dash/bejne/qXx9rduPhZfVqNo.html

supurb!!!!! mortal kombat voice

@Black66

2 жыл бұрын

lol

@Spacecruizer203

2 жыл бұрын

@@Black66 this the favorite out the bunch i bet

Mine tops out at like 35 with a 224c. Replaced the cam rod and piston added jugg-a-vert. Dropped my sprocket to a 12 up front and 40 outback and still cant get over 50

@Black66

16 күн бұрын

I bet its quick though. AS long as its fun !

@raycollier6596

16 күн бұрын

Is the cheetah clutch reliable. That's the only thing I can think of to help my top end

I’m new to all this but I have a question so you took a predator 212 and completely rebuilt it’s internals

@Black66

2 жыл бұрын

Yes, the only part that is Predator is the block.

@InUtero1994

2 жыл бұрын

@@Black66 thank you. Do you have a video on doing engine rebuilds on your channel?

@Black66

2 жыл бұрын

@@InUtero1994 I haven't made a step-by-step detailed engine build video yet. I have videos all over the channel on installing different parts. I do have the Mega Moto stroker build in this video but not to detailed. kzread.info/dash/bejne/qXx9rduPhZfVqNo.html

@InUtero1994

2 жыл бұрын

@@Black66 I’ll have to do some more looking around on your channel but if you made and engine rebuild that would be amazing. I wanna build a bike similar to the one in this video but am kinda confused on where to even start other then for sure getting a bike then swapping the engine and taking out the governor.

@Black66

2 жыл бұрын

@@InUtero1994 That is pretty much it. Start by doing that and then figure out how far you want to go wity the engine. If you are wanting to do a stroker like on this bike ,I would just start out with a Predator 224. It already has the 58MM crank and the reinforced block for about $40 more than the 212.

How much do you have into this build going 70 all in

@Black66

7 ай бұрын

Not totally sure, its been a while. The parts list is in the description of the Mega Moto build video in the Mega Moto playlist. kzread.info/dash/bejne/i5icyMiwo86Tg6g.html

Do you have brakes in front too?

@Black66

2 жыл бұрын

Yes, it has front brakes. Check out the Mega Moto playlist. It shows the entire build kzread.info/dash/bejne/iJaX0qNpmse5edo.html

Nice video how much was that total bill to build that mini bike or better yet do you build for customers if so can I get the total cost sir ? Thanks in advance sir

@Black66

2 жыл бұрын

Thanks for watching the videos! I build the bikes as a hobby and to make the videos. I will probably end up selling or giving away some of bikes on the channel.

U running #35 chain?

Do you think I can get mine 100U colman mini bike that's got a 212cc tillotson to go 70 or 80 with a torc converter?

@Black66

2 жыл бұрын

It would take a serious build.

@GliblyUnited8billion8

2 жыл бұрын

Is there anyway you could do a video on all the thing you half to buy an do to get a mini colman 100u bike to 70 or 80. to show how to get it to that point of speed because I don't know a lot about it. if you got the time if not there is no worries.

@Black66

2 жыл бұрын

@@GliblyUnited8billion8 If you apply the engine build in this series or the Azusa bike series you could defiantly get a Coleman bike to 70 + MPH kzread.info/dash/bejne/iJaX0qNpmse5edo.html

@GliblyUnited8billion8

2 жыл бұрын

@@Black66 thank you I appreciate that man an wanted to let you know your video are awesome 😎

@Black66

2 жыл бұрын

@@GliblyUnited8billion8 Thank you!

what are the chances of this chain breaking with a 212 predator billet rod flywheel mod2 cam and 18lb springs

@Black66

Жыл бұрын

It will hold up to that no problem. It is pre stretched and much stronger than standard 35 chain.

@foo5083

Жыл бұрын

@@Black66 ok thank you

do u use 35 chain on the majority of your bikes?

@Black66

2 жыл бұрын

Yes, RLV Gold on Gold 35 chain

i need a link for sum better mounting bolts these ones i got from walmart well one of them snapped

@Black66

2 жыл бұрын

Here are some that should be decent. www.gopowersports.com/engine-mount-hardware/

@Spacecruizer203

2 жыл бұрын

@@Black66 thanks i was eyeing those but saw the omb ones with the rubber spacers

@Black66

2 жыл бұрын

@@Spacecruizer203 Right on! Ya, as long as there good case hardened bolts they shouldn't break. I think the ones they sell should be good.

@Spacecruizer203

2 жыл бұрын

@@Black66 they better be or im a go over there and make them pay lol

@Spacecruizer203

2 жыл бұрын

@@Black66 jk but dam like you would think they would have some like blue steel lookin ones or something strong for this hobby i mean cmon somebody gotta do something about this or im or im a start making them

Whats the engine setup, cam, carb ect?

@Black66

2 жыл бұрын

Check out the Mega Moto playlist. It shows the entire build kzread.info/dash/bejne/iJaX0qNpmse5edo.html

what are the dimensions of the frame offhand?

@Black66

Жыл бұрын

Its a Mega Moto 80/105 frame

We need to move away from top speeds and start riding these things in and out of other dimensions. Should be quicker/ faster all over

@Black66

2 жыл бұрын

lol, Yes! Time machines!

Can you build me one

Hey man what app you using i wanna do this on my bike I can not find any app that tells me the time I've went from 0 30 or any that do the time just distance

@Black66

2 жыл бұрын

I use a Dragy performance meter for 0 to 30 times

@ALMIGHTYGARAGE

2 жыл бұрын

@@Black66 yea I downloaded it but wouldn't do anything keep saying dragging not found when it tries to connect to Bluetooth?

@Black66

2 жыл бұрын

@@ALMIGHTYGARAGE You have to buy the Draggy device to go with the app. I

@ALMIGHTYGARAGE

2 жыл бұрын

@@Black66 o that's why lol I just got a Motovox with 212 mikuni carb n header governor deleted nothing else surprised it ain't blew yet but its on Motovox goes 47 idk if the ppl before me did anything I don't think so but its wheelie machine its surprised me so far I need to get bullet flywheel do I have to get a rod with it will flywheel do anything alone doesn't that save if from flywheel shattering?

@Black66

2 жыл бұрын

@@ALMIGHTYGARAGE Ya, you can do the flywheel alone . The billet flywheel will add a little timing and make it safer

what size chain are you using on these bikes?

@Black66

2 жыл бұрын

Im using RLV gold on gold 35 chain . check out the build playlist for this bike kzread.info/dash/bejne/iJaX0qNpmse5edo.html

@PopeyesCreeper

2 жыл бұрын

@@Black66 nice. The bike I'm building is going to be a 40 chain, 10 tooth 34 in the back 3.4 ratio.. im hoping it'll still work out.