Great video on how keeping the mechanical seals clean, along with the mating surfaces, is so important. Thank you.
@albertwillyvillamor7439 Жыл бұрын
Thank you for the very imformative video, gather another kind of techniques from you!
@deimerromero301 Жыл бұрын
great explanation! Thank you!!
@tcmusic_thomas_upton5 жыл бұрын
I have never seen a mechanical seal with rings of packing. Very interesting. All the pumps at our facility have either one or the other.
@Zeus-wl2pl
2 жыл бұрын
I don’t understand why packing would be needed. The mechanical seal prevents leakage
@giltupaz5979
Жыл бұрын
@@Zeus-wl2pl in d event of seal failure, conventional packings can save downtime,giving considerable savings to company.
@teamdrummond6915
9 ай бұрын
Lol!!
@Kaushal9424 жыл бұрын
Great video sir 👍👌
@DEEPAKYADAV-vq7zi5 жыл бұрын
Very much for your time and help
@milagresfernandes30192 жыл бұрын
nice explanation 👍
@giltupaz5979 Жыл бұрын
How about d amount of spring tension? do you consider putting shims on d bearing outboard cover to compensate for d axial thrust of shaft?
@josephsaucedo86915 жыл бұрын
Hi I do this for a living and done lots of seal in the last 16 years and I was told to use soap it's easy to flush out and also lubes no grease or oil because our pump are for watering food or there for drinking water. Don't no what you use it for but I hope it's not for drinking water or food. Good video on the pump don't no about grease and oil with water though
@colemorales9140
5 жыл бұрын
Possibly a grey water pump so it wouldn't matter but I'd never think about using what looked like some shc to set my seals.
@guillermoramirez-uq4mk5 жыл бұрын
where could I buy impeller wrench and thank you for you video
@nasrahmed62365 жыл бұрын
nice vedio thanks alot
@eleuteriocusi24126 жыл бұрын
VERY CLEAR
@r.mohandoosr.mohandoos75775 жыл бұрын
very use full video
@yashveersolanki26094 жыл бұрын
Good idea
@Vincentemery20113 жыл бұрын
I think have something you forget instaled. Before you instal the spacer to the shaf, should be instal first small oring.
@balbahadur1827
Жыл бұрын
hello sr i interested This mechanical seal replacement training This good job
@ASHOKKUMAR-pp2td4 жыл бұрын
VERY NICE
@zaidsalah96392 жыл бұрын
Great
@viswanathancr28012 жыл бұрын
good video
@RafaelGutierrez-tv6yl5 жыл бұрын
What if you leaking water Were the des un goes
@akhlakhussain78103 жыл бұрын
Thank you sir
@naweelgamer84014 жыл бұрын
Self priming water pump empiler saft repplas video
@klasssssssss3 жыл бұрын
thanks
@gauravdesai81364 жыл бұрын
Hii may i come in your Workshop sir....?
@usmansabir813311 ай бұрын
Hello everyone Why use impeller o ring? Pls explain Can we install impeller without o ring???
@asifalich54825 жыл бұрын
Brother
@pratapsinghpratapsingh2425 жыл бұрын
pratap singh
@mutluselcuk41112 жыл бұрын
Bizim pompaları balyoz, havalı çektşrme, pres kullanarak sökemiyoruz, 😆
@dirkwellnitz37832 жыл бұрын
I hope this is a joke? I've never seen so many mistakes in a single maintenance video. Good for seal manufacturers aftermarket though
Пікірлер: 37
Great video on how keeping the mechanical seals clean, along with the mating surfaces, is so important. Thank you.
Thank you for the very imformative video, gather another kind of techniques from you!
great explanation! Thank you!!
I have never seen a mechanical seal with rings of packing. Very interesting. All the pumps at our facility have either one or the other.
@Zeus-wl2pl
2 жыл бұрын
I don’t understand why packing would be needed. The mechanical seal prevents leakage
@giltupaz5979
Жыл бұрын
@@Zeus-wl2pl in d event of seal failure, conventional packings can save downtime,giving considerable savings to company.
@teamdrummond6915
9 ай бұрын
Lol!!
Great video sir 👍👌
Very much for your time and help
nice explanation 👍
How about d amount of spring tension? do you consider putting shims on d bearing outboard cover to compensate for d axial thrust of shaft?
Hi I do this for a living and done lots of seal in the last 16 years and I was told to use soap it's easy to flush out and also lubes no grease or oil because our pump are for watering food or there for drinking water. Don't no what you use it for but I hope it's not for drinking water or food. Good video on the pump don't no about grease and oil with water though
@colemorales9140
5 жыл бұрын
Possibly a grey water pump so it wouldn't matter but I'd never think about using what looked like some shc to set my seals.
where could I buy impeller wrench and thank you for you video
nice vedio thanks alot
VERY CLEAR
very use full video
Good idea
I think have something you forget instaled. Before you instal the spacer to the shaf, should be instal first small oring.
@balbahadur1827
Жыл бұрын
hello sr i interested This mechanical seal replacement training This good job
VERY NICE
Great
good video
What if you leaking water Were the des un goes
Thank you sir
Self priming water pump empiler saft repplas video
thanks
Hii may i come in your Workshop sir....?
Hello everyone Why use impeller o ring? Pls explain Can we install impeller without o ring???
Brother
pratap singh
Bizim pompaları balyoz, havalı çektşrme, pres kullanarak sökemiyoruz, 😆
I hope this is a joke? I've never seen so many mistakes in a single maintenance video. Good for seal manufacturers aftermarket though
@Zeus-wl2pl
2 жыл бұрын
Agreed. I thought I was the only one who saw that
@Trudeautthebestt
2 жыл бұрын
what mistakes