Mechanical Aptitude Test 2 | Solved & Explained | Mechanical Comprehension Test |

Hello Every body! Hope that you will be perfect.This video is about Mechanical Aptitude Test or Mechanical Comprehension Test which is very important in issb or any other test.The main purpose of MAT is to check the technical mind of a candidates which is based on your daily life experience and observations.This test is easy but all you need is to manage your time there is no time to think just write the answers with in seconds if you late you will miss other questions which may be easy.Do one thing while attempting MAT if you find a question which is time consuming and you don't know about it just leave the question and go for the next.If you attempt it wrong there will be negative marking and you will loose what you know.Hope that you got understood after watching this video in which i have tried to explain you each and everything with examples.
If you find any question about any part of ISSB feel free to ask in comments i will guide you as much as i can.
Thanks for watching.
Other Videos Of Mechanical Aptitude Tests Are:
• Mechanical Aptitude Te...
• Toughest Mechanical Ap...
• Mechanical Aptitude Te...
• Mechanical Aptitude Te...
For SCT Tips and solved example 1:
• SCT Tips and solved ex...
For WAT Tips and solved examples:
• WAT Tips and solved ex...
• WAT solved example 2 f...

Пікірлер: 57

  • @TimpBizkit
    @TimpBizkit2 жыл бұрын

    Q9 beaker B will release more gas because not only has it got double the weight on the plunger (40kg vs 20kg), but also a bigger opening area. Q10, The right side has a 6 kg weight hanging 4 units out making 24kg-units and 4kg of bar hanging an average of 2 units out making a total of 32kg-units for torque. The left side has 10 kg hanging 2 units out and 2 kg hanging at an average of 1 unit out making 22kg-units of torque, meaning the bar will tip down on the right hand side with the 6kg weight. (Ignoring the 1/3 of the unit to the right and left of the weights but that will only cause even more weight on the right hand side). Quite difficult to answer this in 15 seconds.

  • @finances-hp8ng

    @finances-hp8ng

    Ай бұрын

    💯

  • @ebenandoh-kesson5904

    @ebenandoh-kesson5904

    Ай бұрын

    100. the only way it can be equal is. if the weights are flipped. heavy weight with small opening or lighter weight with a bigger opening.

  • @swag230
    @swag230 Жыл бұрын

    #9 is definitely b

  • @finances-hp8ng

    @finances-hp8ng

    Ай бұрын

    💯

  • @muhammadsamiulhaq1830
    @muhammadsamiulhaq18303 жыл бұрын

    Very good sir we are waiting for next videos kindly jaldi upload kary

  • @guangxidavidliu
    @guangxidavidliu2 ай бұрын

    I am not surprised bridges are collapsing and planes are falling in America.

  • @czemba
    @czemba3 жыл бұрын

    I appreciated the the videos, however somethings, even if you ignore the "real world minutia", are not being explained accurately.. eg: Q5: yes there is "some object" but the force is all applied now to the base pushing towards and up against the mass, whereas the hands on guy has natural leverage over that mass... also Q9: Yes the pressure of gas leaving each beaker is in theory the same but the VOLUME of gas leaving is also equal for an ENTIRELY different reason. Again i appreciate the help learning but do make sure it stays helpful. Thanks mate!

  • @Gammer-zi7wk
    @Gammer-zi7wk3 жыл бұрын

    Nicely done tnkx you sir your method is very good kindly make a video on age ratios

  • @joshuavanalst2365
    @joshuavanalst23658 ай бұрын

    Q8. Read what would fall faster when thrown from the same hight😮. The higher one is. You have to add velocity to your gravitational force. So yeah the heavier the object is the faster it’s going to move.

  • @nickcronin47
    @nickcronin473 жыл бұрын

    Q10: To balance the bar, you would have to have 5 lbs on the right (double the distance - half the weight). We are showing 6 kg on the bar, so the bar is not balanced.

  • @matthewgarner780

    @matthewgarner780

    Жыл бұрын

    Lol thought they had weight hanging... would be balanced as a leverage fulcrum?

  • @gillettecl
    @gillettecl9 ай бұрын

    Question six is a different if you know how to cut down a tree. The question should ask what side the wedge is cut. As when one cuts down a tree its cut from both sides.

  • @amanuelfirtuna432

    @amanuelfirtuna432

    8 ай бұрын

    Boss ya l also doubt

  • @faizakhan2262
    @faizakhan2262 Жыл бұрын

    Kindly upload more

  • @nasirzulfiqar7507
    @nasirzulfiqar75074 жыл бұрын

    Sir AFNS k liya detailed video bana dn plz sir for girls

  • @Gkwithstartsmart786
    @Gkwithstartsmart786 Жыл бұрын

    Q9. B WILL release more gas because the place of eject surafce area of B increase than A

  • @tandrik6297

    @tandrik6297

    Жыл бұрын

    correct. Question needs to ask which beaker produces more pressure. Not more gas. In this case B produces more volume to escape hence more gas

  • @fuzyprojects
    @fuzyprojects3 жыл бұрын

    Graphics need work. In the first question all the gears have the same number of teeth 18. So all the gears should rotate at the same RPM regardless of their diameter

  • @chicanobluesaz4191

    @chicanobluesaz4191

    3 жыл бұрын

    Exactly what i was going to say. These tests are a joke.

  • @BeachedWhalification

    @BeachedWhalification

    3 жыл бұрын

    I WAS RIGHT. >:(

  • @loue9067

    @loue9067

    2 жыл бұрын

    The smaller the gear= faster the more teeth = faster as well. Since they all have the same amount of teeth, the smaller one will still be faster 💯

  • @akuruyajoshua719
    @akuruyajoshua7194 жыл бұрын

    Thank u very much sir.....I have really learnt alot from these explanations

  • @hamzarehman3970

    @hamzarehman3970

    4 жыл бұрын

    Glad to hear that james

  • @fuzyprojects
    @fuzyprojects3 жыл бұрын

    In question 9 your answer would be correct if you swapped the position of the weights or swapped the discharge port sizes.

  • @Punisher-1

    @Punisher-1

    3 жыл бұрын

    I think question 9 is wrong because 40kg has a bigger opening then 20kg beaker, therefore beaker B will release more gas.

  • @jeffreyMagnum460

    @jeffreyMagnum460

    2 жыл бұрын

    Smaller hole beaker would require more weight.

  • @fuzyprojects
    @fuzyprojects3 жыл бұрын

    In question 5 for B to be the correct answer the man would need a fulcrum under the lever or he could apply an upward force on the lever

  • @TimpBizkit

    @TimpBizkit

    2 жыл бұрын

    From the way the stick is bending it looks like he's trying to flick the ball - which would require much more force and load on the back than a simple push. Surely it would look more natural with it bending the other way if his intent is to lift the end to nudge the ball forwards.

  • @x-techgaming
    @x-techgaming2 жыл бұрын

    Q5 = leverage

  • @ceer8847
    @ceer88472 жыл бұрын

    can someone tell me if Q#9 is correct or what the correct answer is.

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    B

  • @kokokaka3841
    @kokokaka38412 жыл бұрын

    Sir what does equal mark C

  • @bilalmir3198
    @bilalmir31983 жыл бұрын

    I didnt understand question 9...plz elaborate

  • @evelynluna4779

    @evelynluna4779

    3 жыл бұрын

    its wrong

  • @kainatnarejo1595
    @kainatnarejo15953 жыл бұрын

    Sir if anyone is not good in math then he or she is able to join army as a officer

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    A

  • @ahfrecipes4970
    @ahfrecipes49703 жыл бұрын

    Background music name which is on the start of video

  • @blakeeb9134

    @blakeeb9134

    3 жыл бұрын

    Waves by Jarico

  • @bseksindhacademy5494
    @bseksindhacademy54944 жыл бұрын

    SIR WAT BANANE ME GRAMMER KA USE KESE PERFECT KRE OR IS KI ZAROORAT HE BHI YA NHI

  • @hamzarehman3970

    @hamzarehman3970

    4 жыл бұрын

    apka sentence clear hona chahye means easily samjh a jay thora boht grammar ka issue ho to matter ni krta

  • @nomaniqbal497

    @nomaniqbal497

    3 жыл бұрын

    sir MAT ka sath verbal aur non verbal b hoty haen screenout krny ka liye yan sirf MaT e hta a intelligence portion ma ?

  • @hamzarehman3970

    @hamzarehman3970

    3 жыл бұрын

    verbal and nonverbal b hoty hn screenout test ma.

  • @finances-hp8ng
    @finances-hp8ngАй бұрын

    Q10 answer is correct, but the explanation is wrong: compare the total moments not the total weights/masses.

  • @derekedge2089
    @derekedge2089 Жыл бұрын

    Yeah. I don't think question 7 fits with the test question types. Explanations aren't the best. I give it a 6 out of 10.

  • @poetryfinder3117
    @poetryfinder31174 жыл бұрын

    PDF available hy

  • @hamzarehman3970

    @hamzarehman3970

    4 жыл бұрын

    sorry bro Not available

  • @poetryfinder3117

    @poetryfinder3117

    4 жыл бұрын

    @@hamzarehman3970 from where you have got mAT

  • @sanatanainfiniti4239
    @sanatanainfiniti42392 жыл бұрын

    I dont know which test give out such questions. These seems logical but i dont think its gonna be on a mech aptitude test.

  • @evelynluna4779
    @evelynluna47793 жыл бұрын

    number 7 is so wrong .

  • @herambsawant8680
    @herambsawant86803 жыл бұрын

    I guess ans 3 is wrong? What about density we need to count it as well

  • @arkmid-media7864
    @arkmid-media78643 жыл бұрын

    u r wrong the answer of question number 9

  • @dereksmallsuk
    @dereksmallsuk3 жыл бұрын

    Too slow. Shit.

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    B

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    A

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    B

  • @antoniogrande6245
    @antoniogrande6245 Жыл бұрын

    A