No video
Келесі
- 18:37
- 3,6 М.
- 10:33
- 2,4 М.
- 00:30
- 37 МЛН
- 19 күн бұрын
- 27:47
- 578 М.
- 7 күн бұрын
- 00:11
- 11 МЛН
- 6 күн бұрын
- 00:23
- 33 МЛН
- 6 күн бұрын
- 12:47
- 213 М.
- 7:21
- 1,2 МЛН
- 14:26
- 592 М.
- 21:55
- 19 МЛН
- 21:58
- 51 МЛН
- 30:41
- 1,6 МЛН
- 22:12
- 558 М.
- 00:30
- 37 МЛН
- 19 күн бұрын
Пікірлер: 36
I live in So Cal and it gets over 120 sometimes. Pretty much a bone stock besides Internals,Damond mm corksport top mount baby tune and heat soak was ridiculous before I got the cs....night and day. It's my daily 150k original turbo no smoke and such 07Speed3 Gt. You wouldn't believe me but I was doing 140 or more and I didn't know a CHP was chasing me for 15 miles or so and I didn't know. He only caught up because I slowed down to exit before a major interchange. So any speed 3 owners know a CHP Tahoe can't keep up he was like i couldn't catch you😂Let's say I used the professional assistance card and kept my car. Brother is a CHP 🙏 Ticket was very exspensive and I stayed out of jail. If I knew he was back there I would have stepped on it, she had some more and these little cars are super solid at speed and it blew my mind.
Using the computer to look at the website was good, was my first time. Randy is as good as Corkspkort
I have a 2013 mazdaspeed3 bone stock with 85K on the clock daily driver with no issue a very very fun car to driver in 2023
@FiveFiveGarage
Жыл бұрын
Still drive mine when its nice out! The Miata gets more love at the moment but the Speed 3 still puts a smile on my face!
Great info as always. Thanks for making these videos.
Right at the beginning of watching the video: there is NO debate about TMIC vs FMIC. FMIC is MASSIVELY superior, of course. The temperature of compressed air entering the engine is incomparably lower with the same size of a FMIC, compared to a TMIC. Anyway, thanks to you, I will go for 2" tubing for my FMIC. I definitely don't want a radical increase in turbo lag as it would brutally interfere with the increase in power (in terms of lap time and usability).🙂👍
@FiveFiveGarage
Жыл бұрын
Definitely. But I had to use a clickbait-ish debate to get people to watch it...LOL!
So close to getting my 2012 mazdaspeed 3 hopefully I get it!
Ughhhh just got my bayson r grill in! Cant wait to go "big turbo" and mishimoto m-line intercooler! 🤤🤤🤤
I live in South East Asia, near the equator. I've got cpe tmic on stock boost and turbo with a dp. Heat soak kills the engine with high intake temp if you are driving in the city. Never load up the engine when driving in the city during peak hours. On the highway is where you'll load it up coz as soon as you reach the open road, it'll take less than 2 miles to cool down the intake air temp. Efficiency will improve coz nothing is blocking the radiator and the boost kicks in quicker when the path is waaaay shorter than a fmic. For sure it'll be a fmic when I'm using a bigger turbo+higher boost😉
very useful, if you could make a video on which turbo is best for mazdaspeed 3 and how to prepare engine to make sure it's ready for big turbo upgrade like a Precision 6466 etc it would be great.
@FiveFiveGarage
3 жыл бұрын
That is a great idea! I will add it to the list. I have already researched some of it for my Miata build. Would it be beneficial if I add some basic fueling upgrades too?
@fingeronthepulse8
3 жыл бұрын
@@FiveFiveGarage yea go ahead please because I’m looking to add big turbo and my stock block but I don’t want it to go zoom zoom boom. I want my engine to be ready for big turbo upgrade
@FiveFiveGarage
3 жыл бұрын
Got it. The fueling part is the one that catches people out, there is a limit to how much the stock system can support, and then it gets $$$$$!
@fingeronthepulse8
3 жыл бұрын
@@FiveFiveGarage If I go with adding Cobb AccessPort - CorkSport HPFP - Cobb Intake and turbo inlet pipe, How hp do you think I can gain on Mazdaspeed 3 ?
@FiveFiveGarage
3 жыл бұрын
Probably like 10hp. The downpipe is the true power unlocker on this car. The bottleneck isn't the turbo, its the downpipe. The turbo can't breathe fully.
your vids are the best, thanks for making these!
I have a CPE top mount but god dam those gold mishimoto coolers look so good 🥺🥺🥺
Excellent video appreciate you
Very interesting video dude your for and against was a little diplomatic though lol, you could also do recirculation valve vs dump valve video educate a few more from the community 👍
@FiveFiveGarage
3 жыл бұрын
Diplomacy works sometimes lol, I wanted to get the information out there and let people decide for themselves. Good idea on the recirc vs dump valve idea I will add it to list!
Do you need a tune for front mount intercooler or will it be fine on stock
@FiveFiveGarage
3 жыл бұрын
Do you have any other mods that affect air flow (i.e. aftermarket intake)? The Gen 1's have a little bit of leeway, the Gen 2's do not. Any time airflow mods are done (intake/intercooler) you are probably looking at a tune. A FMIC on a stock engine with no other mods *might* be ok, but you are looking at increasing turbo lag and it could be less efficient than a top mount at that point. If you are stock and want better efficiency, I would look into an aftermarket TMIC and save some $$$$.
@spencersingh5143
Жыл бұрын
It's a 2008 gen 1 white mps everything is stock was gonna do intake stock size and corksport tmic should be okay without tuning
Good information!!!!
Do you go to meets I live in Chicago as well and have ms3?
@FiveFiveGarage
3 жыл бұрын
I don't live in Chicago, I do visit the suburbs every now and then.
Which type of turbo do you have on the speed3 is it the K04/stock ? If it's the case do you turbo lag with the Mishimoto S-Line ?
@FiveFiveGarage
3 жыл бұрын
Still on the K04. If you switch to a FMIC you will experience a small amount of lag, because you have just added extra volume (the piping) to the setup over the very short runs of the TMIC (two couplers). It is really minimal for me, when I was at 50/50 on my BPV it was more noticeable, I went back to 100% recirculation and it became less notable. When I autox/trackday the car I don't notice it, just during street driving. If I were using this a street car, I would go with a smaller core and smaller piping and the lag wouldn't be an issue.
@fingeronthepulse8
3 жыл бұрын
@@FiveFiveGarage what do you think about tr8 kit is it the best for a street car or I should go with tr6 ?
@FiveFiveGarage
3 жыл бұрын
The TR8 is a great street setup with some headroom for mods
Would an m-line intercooler be too big for a cst4?
@FiveFiveGarage
3 жыл бұрын
No. As long as keep your tubing sizes under 3" you should be fine.
@NewDemons666
3 жыл бұрын
@@FiveFiveGarage okay cool! Thanks, Randy! What intercooler piping are you using?
@FiveFiveGarage
3 жыл бұрын
Im using 2.5" piping from the CX Racing kit.