Mazda Tribute V6 Running Rough/ Misfire Solved!
The correct injectors for these generations come back as two different part #'s : Yl8E C2B and YL8E C7B. The cylinders that werent performing correctly had the C2B's in it, which have a lower flow rate @ +/- 15.5 lbs/hr. The other cylinders were equipped with the C7B's (+/- 18 lbs/hr) and since they were all fine, I am replacing cylinder 4 &6 with the C7B's. This corrected my issue of running rough and hesitation under load.
Пікірлер: 25
What was the proper part number? I’m having the EXACT issue. Did you replace the fuel filter?
i had the same problem and i find that the owner replaced the valve cover gasket and swap the connectors for cylinders 4 and 6.
It sounds like it's sucking a lot of air..any ideas?
Did that work?
The misfire you had, what speed were you traveling at when it started misfiring? or was is missing when idle? My Tribute feels fine up to around 80km/h which is when it starts spluttering a bit, but then evens out near 100km/h
@apeescape2005
5 жыл бұрын
It started at idle. Long story short this thing had two dead cylinders even though there was spark and fuel, no compression!
@Jubi316
4 жыл бұрын
apeescape2005 ao it was not the injection
@Stgangle
6 ай бұрын
Ever find out what it was? Mine shutters at 80km/h also and it is fine after that
What are the spark plugs supposed to be gapped at? For Mazda Tribute v6? I can't find anything online. Thanks.
@l3oki668
2 жыл бұрын
50inch
Coil wiring are in the wrong holes that is that problem look at the wiring i have fixed the exact problem before
My Tribute backfires..and it's running rough, could this be the injectors?
@apeescape2005
3 жыл бұрын
It could be, but the only way to tell would be with professional equipment at that point. You can put a gauge on the fuel rail to make sure they're getting enough pressure. My issue was a weak pump.
I have a 2002 tribute 3.0 awd also having a misfire and boggling down and slow exceleration
@jrm8024
3 жыл бұрын
im having that same problem now, same year....i got a cylinder 6 misfire, and b1s2 o2 code come up
@wally4ful
3 жыл бұрын
@@jrm8024 did you ever fix this? If so what was the solution im having the same issue 😅
@jrm8024
3 жыл бұрын
@@wally4ful i replaced the coil, and all the sensors (only needed the 1 but did all 4 anyways) ...pretty simple
I would have thought compression....
If it was black o-rings you had a nightmare.
So did u replaced the injectors? If u did, did it solve your problem.
@apeescape2005
2 ай бұрын
I did replace the injectors, fuel pump, and double checked pressure. This vehicle had bad compression.
@Truthsearcherforever777
2 ай бұрын
@@apeescape2005 oh wow if u remember what was the numbers on compression ?
@apeescape2005
Ай бұрын
@@Truthsearcherforever777 I don't remember, sorry! :/
@179joshua
12 күн бұрын
I hate to beaker it to you but your wiring the the coils are in the wrong holes that's the problem
Hey where do you live